
Tutorial - How to give your Raspberry Pi a Static IP Address
If you are using the latest Raspbian Jessie, click here to read our updated guide. To log in to your Raspberry Pi remotely, you'll need the IP of the Raspberry...

How to control your Raspberry Pi robot with a TV remote
If you’ve bought one of our affordable EduKit Robotics kits, you’ll no doubt come to a point where you want to advance further by customising and creating your very own unique...

Control your Raspberry Pi media centre with FLIRC
One of the first things you’ll need when you set up a Raspberry Pi media centre is a remote control. Using a keyboard and mouse just isn’t ideal in most...

An introduction to Raspberry Pi GPIO
What’s so special about Raspberry Pi? It’s a question that I’m often asked and the answer is usually the same. The GPIO pins of course! Those little stabby pins along...

Which Programs are on Raspbian?
The Raspbian operating system has a lot of programs already installed by default. But what are they all? This weeks tutorial will explain what each of them are. Going from the Top Programming...

Setting up a Wireless Access Point - Bridge Method (internet over wired Ethernet)
In this tutorial we will show you how to setup your Raspberry Pi as a WiFi Access Point and how to bridge the access point to your wired internet connection....

Testing PCsensor's TEMPerHUM Part 4 - Linux (Software Logging)
Testing PCsensor's “TEMPerHUM” Phase 4: Testing PCsensor's “TEMPerHUM” in Linux environment In Phase 3 we talked about using TEMPerHUM temperature & humidity sensor in Linux GUI (graphical user interface)(graphical user...

Testing PCsensor's TEMPerHUM Part 3 - Linux (Hardware Logging)
Testing PCsensor's “TEMPerHUM” Phase 3: Testing PCsensor's “TEMPerHUM” in Linux environment As we discussed in Phase 1 & 2, it was possible to use TEMPerHUM on a Microsoft Windows -based...

Testing PCsensor's TEMPerHUM Part 2 - Windows XP (Hardware Logging)
Testing PCsensor's “TEMPerHUM” Phase 2: Testing PCsensor's “TEMPerHUM” in Windows XP environment As we discussed in Phase 1, it was needed to have .NET Framework installed on a Microsoft Windows...

Testing PCsensor's TEMPerHUM Part 1 - Windows XP (Software Logging)
Testing PCsensor's “TEMPerHUM” Phase 1: Testing PCsensor's “TEMPerHUM” in Windows XP environment At first I wanted to test this sensor device in Microsoft Windows environments for which the producer dispatched...

Simple, low powered NAS
What you will need: 1x Raspberry Pi 2x External Hard Drives 1x USB Powered Hub We will assume you have Raspbian installed, and are fully up-to-date. So first thing to...

Setting up a Wireless Access Point - NAT Method (internet over wireless interface)
In this tutorial we will show you how to setup your Raspberry Pi as a WiFi Access Point and how to NAT the access point to your wireless internet connection....