Pastel Lemon PLA Filament (1.75mm, 1kg)

3DQF PLA is made in Greater Manchester right here in the UK, with tight tolerances, the highest quality material and a fully recyclable custom cardboard spool. We're big fans of 3DQF filament and it's great to support a fellow small UK business in the maker scene.

This is 3DQF Pastel Lemon 1.75mm PLA in a generous 1kg spool. A true summertime filament with a brilliantly smooth finish, the new Pastel Lemon will work great with other pastel colours in the range for calm yet bright, colourful prints.

The custom laser-cut cardboard is fully recyclable and includes a filament indicator to help you keep an eye on your remaining PLA.

3DQF PLA holds a tight tolerance of 0.03mm - and that's over a 21-kilometre run (a human hair is .04!)! This 3D Printing filament enjoys higher temperatures than others on the market (210-225°C), so we suggest starting at 210°C and adjusting to suit your printer/results.

We stock lots of different colours of PLA from 3DQF, and also offer 3DQF PETG!

Printable Spool Adaptors

As the spool is cardboard, you may want to print an adapter for your setup (please note that future batches of this filament may include a printed spool inner already within the reel):

• Bambu Labs AMS users - Print this spool adaptor for the best performance (we also found that squishing a big ball of blu-tack inside the adapter can help keep the AMS happy as the extra weight helps to keep the spool in place)
• Bambu AMS Lite users - Print these low-friction spool rings
• Using a roller-type spool holder? Print one of these spool edge protectors (Not AMS-friendly, use the AMS version above)
• Using a traditional spool holder? Print these low-friction inserts for smooth, stable unloading

Printing Parameters

• Hot end Temperature: 210-225°C (with our X1C we find 230°C works best, but it's a fast machine so tweak for your scenario)
• Bed Temperature: 30-50°C (with our X1C we find 60°C on a textured PEI plate works best)
• First Layer Speed: 30 mmps
• Print Speed: 50-80mmps
• Retraction: 2-4mm
• Fan: Off for the first layer, then 100% (we keep ours off for 3 layers)
• Filament cleaner: Recommended
• Like all PLA, keep it dry and away from humidity as much as possible
• ...and always check your levels...then check em' again!

Resources

• Easy Start Guide
• High-Speed Printing Guide
• Datasheet

Specifications

• Material: PLA filament
• Diameter: 1.75mm + or - 0.03mm
• Filament weight: 1kg gross
• Hotend temperature: 210 - 225°C (between 60-120mm/s print speed)
• Bed temperature: 40-50°C or unheated

Spool Specifications

• Width: 69mm
• Depth: 194 mm
• 70 mm Axle
• Card Construction
• Delivered in an Airtight Bag with desiccant
• Fully Recyclable

Package Contents

• 1x 1kg spool of 1.75mm PLA (Pastel Lemon)

Made in the UK

This PLA filament, spool, outer box and even the box printing are all made in the UK.