Our space Unicorns are very beautiful, all-in-one, RP2350-powered LED matrices perfect for conveying information fabulously (or for sprucing up your desktop, makingspace or Imaginarium). There are a ton of features aboard, here are some of our favourites!
Loads of RGB LEDs, all with individual colour and brightness control. We're in mad love with these big bright squircular LEDs with their rounded apertures and built-in diffusion.
Looks great on video - invoking RP2350 magic means we can update the LEDs really quickly (we measured around 300 fps at 14-bit precision). This means there's no nasty strobing, artifacting or brightness stepping when it's filmed, so it's perfect for adding to the background of your streaming setup.
2.4GHz wireless connectivity (courtesy of the Raspberry Pi Pico 2 W) so you can use it to display all sorts of interesting data from the internet.
There's also an onboard amp and little speaker for bleepy alerts and *futuristic noises* and a battery connector so you can power it without it having to be tethered to a USB port. Every Unicorn comes with a pair of sleek little metal legs so it can stand up on its own (and has a selection of mounting holes if you'd prefer to do something else).
Use it to make a very fancy clock, a very fancy weather display or a very fancy output for sensors (other very fancy use cases are available).
We also have two other matrices with Pico 2 W in our store. Check out the Galactic and Cosmic Unicorn
Revision History
As of 29th January 2025 - The older Stellar Unicorn has improved with Pico 2 W Aboard! Pico 2 W and its souped-up RP2350 chip brings some exciting improvements - including a higher core clock speed, double the on-chip SRAM and double the on-board flash memory. RP2350 adds hardware support for floating point number crunching, which means graphical effects and demos should run even faster!
Features
Raspberry Pi Pico 2 W Aboard
Dual Arm Cortex M33 running at up to 150MHz with 520KB of SRAM
JST-PH connector for attaching a battery (5.5V max)
Fully assembled
No soldering required.
Getting Started
To make it easy to get started, all our Unicorns ship pre-loaded with pirate brand MicroPython and a demo reel of examples of pretty examples to stare at.
In our software, we use the Pico 2 W's PIOs (Programmable IOs) to drive the LEDs. Internally, Unicorn applies gamma correction to the supplied image data and updates the display with 14-bit precision resulting in extremely linear visual output - including at the low end.
The display is refreshed around 300 times per second (300fps!) allowing for rock-solid stability even when being filmed, no smearing or flickering even when in motion.
Power consumption stats! We measured Galactic and Cosmic Unicorn as consuming just over 1A at maximum brightness, full white. When choosing a battery, consider that the LEDs will look their absolute best when they have access to at least 3.6V of power. At lower voltage levels you will start to see the blue elements of the LEDs fading out - this starts to become very noticeable at 2.9V and below. For best results when running on battery, we'd suggest using a chunky LiPo.
Note that Unicorns have no battery charging hardware onboard - this is so you can use either alkaline or LiPo batteries safely. You'll need to charge up your LiPo battery with a separate battery charger (we like LiPo Amigo).
Squircle alert! Some batches of Unicorns have LEDs with more rounded apertures (though the LED specs and brightness remain the same). They all look good, but if you want a perfectly visually matched pair (or stable) of Unicorns it's probably best to buy them at the same time.
Payment & Accreditations
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Skip to content
