ESP32-S3 Development Board with 2.8" IPS LCD Display (480 x 640)

This board comes with an Xtensa 32-bit LX7 dual-core processor that operates up to 240MHz and 16MB Flash, 8MB PSRAM and an SD card slot. It supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with an antenna, and you'll find UART, I2C and GPIO connections on the board with a USB-C port for power.

On the back of the board, you'll find a colourful 2.8" IPS display with 65K colours and a 480 x 640 resolution. The capacitive touchscreen version (Optional) uses the I2C connection for touch control and has the interrupt function. There is also an MX1.25 2-pin connector for a 3.7V lithium battery and an RTC battery connector.

Two variants are available - Without Touch or With Touch. Please select an option before adding it to your cart! 

Please note: this board uses a tiny MX1.25 connector for LiPo power. Most LiPo batteries on the market (including ours) use a larger JST fitting. We do not yet stock batteries with an MX1.25 connector, however, you can customise your battery with one of our 1.25mm pitch cables to make a compatible battery yourself (assuming you have the ability, knowledge and tools to do this safely). If you want to source your own battery to fit inside the case, a battery size of 3.85 x 24 x 28 mm is recommended.

Features

• Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
• 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
• 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
• 2.8" LCD display, 480 x 640 resolution
• Supports touch control via I2C interface, with interrupt support (for touch version only)
• UART, I2C, some IO interfaces and a full-speed USB port
• QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
• Supports accurate control such as flexible clock and multiple power modes to realise low power consumption in different scenarios

What's on Board

1. ESP32-S3R8
   Dual-core processor, up to 240MHz operating frequency
2. 16MB Flash
3. QST attitude sensor
   QMI8658 (6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer)
4. Onboard ceramic antenna
5. TCA9554PWR
   GPIO expander chip
6. RTC chip
   PCF85063 RTC chip
7. MP1605GTF-Z
   Power module, 2A current (MAX)
8. Battery recharge manager
9. Buzzer
10. TF card slot
    on the back side of the PCB
11. BOOT button
12. RESET button
13. IPEX1 connector
    Switching to use an external antenna via resoldering the resistor
14. 2 x 12-pin 2.54mm pin header
15. RTC battery header
    for connecting rechargeable RTC battery
16. MX1.25 battery header
    MX1.25 2-pin connector, for 3.7V Lithium battery, supports charging and discharging
17. UART header
18. Charge indicator
19. USB Type-C port
20. Power indicator
21. I2C header
    connecting with an internal chip only supports the I2C peripherals and cannot be mapped to other functions
22. Battery power supply control button

Resources

Without Touch

• Product Wiki
• Schematic

With Touch

• Product Wiki
• Schematic

Pinout

Package Contents

Without Touch

• 1x ESP32-S3 2.8" Display Development Board
• 1x SH1.0 4-pin cable (100mm)

With Touch

• 1x ESP32-S3 2.8" Touch Display Development Board
• 1x SH1.0 4-pin cable (100mm)