





Login / Signup
Cart
Your cart is empty
Place your Raspberry Pi camera up to 15 metres away with the Arducam LAN Cable Extension Kit. It converts the MIPI CSI-2 interface to Ethernet, works out of the box with Pi 5/4/3/CM, and supports a wide range of cameras.
The Arducam LAN Cable Extension Kit lets you place your Raspberry Pi camera up to 10–15 metres away from your board using a standard LAN cable (1m cable included). It converts the high-speed MIPI CSI-2 interface into an Ethernet-compatible connection, allowing far greater range than a traditional FFC cable - and without needing any additional software or configuration.
It’s plug-and-play with Raspberry Pi 5, 4 and 3 and Compute Modules (CM modules via carrier boards with appropriate IO available). Simply connect your camera and board at each end of the LAN cable, and you’re ready to go. A 1m Rj45 cable is included to get you started, but you'll find longer RJ45 cable options in the store.
The kit supports a wide range of camera modules, including:
Raspberry Pi and camera modules not included
Supported cameras | Video Modes |
Camera Module V1 (OV5647) | 1080p 30 fps, 720p 60fps, 480p 60fps/90fps |
Camera Module V2 (IMX219) | 1080p47, 1640×1232p41, 640×480p206 |
HQ Camera (IMX477) | 2028×1080p50, 2028×1520p40, 1332×990p120 |
Camera Module V3 (IMX708) | 2304×1296p56, 2304×1296p30 HDR, 1536×864p120 |
Arducam IMX296 Global Shutter Camera (B0445) | 1440×1080@60fps |
Arducam IMX519 Camera | 1080p30, 720p60 |
Arducam 64MP Camera (B0399) | 1080p30, 720p60, 640×480p60/90 |
Arducam 64MP Camera (B0483) (link-frequency=456000000) | 1080p30, 720p60, 640×480p60/90 |
Arducam ToF Camera (B0410) | 240×180@30fps |
Raspberry Pi and camera modules not included