






Login / Signup
Cart
Your cart is empty
The SupTronics X1009 5-Port SATA Add-on for Raspberry Pi 5 connects up to five SATA drives via PCIe at 5Gbps. Powered through a 12V DC jack with onboard converters, it powers both the Pi and drives from one source.
The SupTronics X1009 5-Port SATA Add-on is designed to offer a high-capacity and high-speed storage solution for your Raspberry Pi 5. This board supports the simultaneous connection of 5 large-capacity SATA storage devices, with the SATA 3.0 interface reaching speeds of up to 5Gbps via PCIe.
The X1009 features a 12V input via a standard DC jack (power supply not included) and is equipped with high-efficiency DC/DC step-down converters to power both your Raspberry Pi 5 and PCIe devices concurrently, simplifying the power supply to a single source. Do not power your Pi 5 via USB-C at the same time as the barrel jack!
Ideal for creating a home media centre or setting up a network-attached storage (NAS) system.
Please read the specifications - you're going to need a beefy 12V PSU to power five drives at once (up to 11A!).
HDDs, Raspberry Pi, Active Cooler and power supply not included.
The X1009 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware.
Do not power the X1009 via the DC power jack and the Raspberry Pi 5 via USB-C at the same time.
Power supply | 12Vdc ±5% ≥3A for one 3.5" HDD or one 2.5" HDD |
≥5A for two 3.5" HDDs, ≥7A for three, ≥9A for four, ≥11A for five 3.5" HDDs | |
≥4A for two 2.5" HDDs, ≥5A for three, ≥6A for four, ≥7A for five 2.5" HDDs | |
Your SATA drives can also be powered from a separate PSU. | |
Ports & connectors | DC power jack ×1 – 5.5×2.1mm |
PCIe connector ×1 – 16-pin pitch 0.5mm | |
SATA connectors ×5 – 7P | |
PCIe cable length | 37mm |
PCB size | 85mm × 57.2mm |