The ShellyWave Pro Shutter is a professional DIN rail Z-Waveshutter controlrelay for motorised blinds, roller shutters, Venetian blinds, awnings and similar motorised covers, supporting up to 16A per channel, equipped with an integrated power meter that allows you to control and monitor the power consumption for each channel.
Different types of actions, scenarios, and schedules can be set to sync your environment to your daily activities or business needs, via the Shelly smart home ecosystem, including the Shelly Smart Control app - or link it with a popular home automation software such as Home Assistant via a Raspberry Pi!
Note:You may require a neutral wire to use this product. Please research the device and your home wiring (safely, see below) before purchasing.
Shelly Wave works on Z-Wave
By using Z-Wave, smart home products can seamlessly communicate with each other, regardless of their brand or platform, thanks to a centralized smart hub (Z-Wave gateway is required)! Shelly devices work on the latest Z-Wave chip generation (S800), one of the most popular standardized technologies for smart homes in the world.
Z-Wave devices have specific requirements in order to function correctly, such as the necessity to use a supported Z-Wave hub.
All Shelly Pro products carry a five-year manufacturer warranty.
This warranty covers any issues with the hardware or firmware that exist at the time of purchase or that appear within the warranty period. The warranty includes all parts of the hardware, such as the body, mechanics, and display (if applicable). However, it does not cover consumable items like batteries or accessories, as their lifespan depends on how much they are used.
⚠️Caution - Read Before Buying⚠️
Before beginning the installation, please read this guide and any other documents accompanying the device carefully and completely
Danger of electrocution. The mounting/installation of the device should be performed by a qualified person (electrician)
Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of the law or refusal of legal and/or commercial guarantee (if any)
Allterco Robotics (makers of Shelly products) and Mann Enterprises LTD are not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure to follow the user and safety instructions in the printed guide accompanying this product (also available in the resources section below)
Do not connect the device to appliances exceeding the given max load.
Use the device only with a power grid and appliances which comply with all applicable regulations. Short circuit in the power grid or any appliance connected to the device may damage the device.
Before starting, wire check that the breakers are turned off and there is no voltage on their terminals. This can be done with a phase meter or multimeter. When you are sure that there is no voltage, you can start wiring the cables.
Highlights
Z-Wave operated - Include Wave Pro Shutter to your Z-Wave network and control it remotely. It‘s compatible with all certified Z-Wave gateways
Position control - Use Wave Pro Shutter with your Venetian blinds and control the tilt position (angle) of slats to adjust the amount of light in a room
Slats angle control - Use Wave Pro Shutter with your Venetian blinds and control the tilt position (angle) of slats to adjust the amount of light in a room.
Associations - Establish direct communication between devices in your Z-Wave local network and set actions with no hub present
Smart Schedules - Set up your blinds to work automatically by creating personalized schedules aligned with your daily routine or synchronize with sunrise/sunset (gateway required)
Smart Scenes - Set custom scenes by combining Wave Pro Shutter with any other Z-Wave devices (gateway required)
Features
Control the tilt position (angle) of motorised Venetian blind slats and similar blinds
Supports push-buttons/momentary switches, and toggle switches
Power metering
Extremely low power consumption: < 0.3 W
Z-Wave frequency band: 868.4 MHz (CEPT countries)
Latest technology: Z-Wave 800 Series
Automatic set-up with SmartStart
Security 2 Authenticated for the highest level of security
Supports over-the-air firmware updates
Works with Z-Wave-certified gateways and over 4,000 Z-Wave devices
*A gateway (smart hub) is not included. A Z-Wave gateway (smart hub) is required for the configuration of the device.
Specifications
Power supply
110 - 240 V AC, 50/60 Hz
Power consumption
< 0.3 W
Power measurement [W]
Yes
Max. switching voltage AC
240 V
Max. switching current AC
16 A per channel
Overheating protection
Yes
Overload protection
Yes
Overvoltage protection
Yes
Distance
Up to 40 m indoors (131 ft.) (depends on local conditions)
Z-Wave® repeater:
Yes
CPU
Z-Wave® S800
Z-Wave® frequency bands
868.4 MHz
Maximum radio frequency power transmitted in frequency band(s)
Skip to content
