RP2040 Zero Development Board

This is a practical and affordable microcontroller board with plenty of features to get you started on your next project! It has an onboard DVI interface, a TF card slot, and a PIO-USB port. This board is also compatible with the Raspberry Pi 40-pin GPIO header. The board uses the RP2040 microcontroller chip, equipped with a dual-core ARM Cortex M0+ processor. This processor can operate up to a maximum of 133 MHz. For memory, it has 264KB of SRAM and 16MB of flash memory, providing decent capacity for various tasks.

With its onboard DVI interface, it enables it to connect with many HDMI screens that support DVI. Additionally, the board's PIO-USB port allows it to function both as a USB host and a slave, providing flexibility in connecting with different devices. It also supports multiple programming environments, and is compatible with C/C++, MicroPython, and Arduino, providing flexibility for people with different programming preferences.

Features

• RP2040 microcontroller chip designed by Raspberry Pi
• Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 16MB of onboard Flash memory
• Onboard DVI interface can drive most HDMI screens (DVI compatibility required)
• Supports use as a USB host or slave via onboard PIO-USB port
• Onboard TF card slot for reading and writing TF card
• Onboard Lithium battery recharge/discharge header, suitable for mobile scenarios
• USB 1.1 with device and host support
• Drag-and-drop programming using mass storage over USB
• Low-power sleep and dormant modes
• 2x SPI, 2x I2C, 2x UART, 4x 12-bit ADC, 16x controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 8x Programmable I/O (PIO) state machines for custom peripheral support

Resources

• Product Wiki
• Schematic

Pinout

1. USB Type-C Connector
   For communication and program burning
2. PIO-USB port
   For use as a USB host or slave via PIO
3. DVI interface (Mini HDMI connector)
   For driving a DVI screen with an HDMI cable
4. TF Card Slot
   SPI Interface Communication
5. RP2040
   Dual-core processor, up to 133MHz Operating Frequency
6. W25Q128JV
   16MB NOR-Flash
7. RUN Button
   Reset Button
8. BOOT Button
   Press it when resetting to enter download mode
9. Lithium Battery Header
   PH2.0 header, for connecting a 3.7V Lithium battery, allows recharging/discharging the battery
10. 40-Pin GPIO Header
    Compatible with some Raspberry Pi HATs
11. Debug Interface

Package Contents

• 1x RP2040 Zero Development Board