RP2040 MCU Board with 0.99" Round IPS LCD

This MCU Board has the RP2040 microcontroller chip from Raspberry Pi and a dual-core Arm Cortex M0+ processor that runs up to 133 MHz. It includes 264KB of SRAM and 2MB of flash memory for storing code and data. It comes with a small, round 0.99" IPS LCD that has a 128 x 115 resolution and 65K colours for clear and colourful visuals. The board is compatible with programming in C/C++, MicroPython, and Arduino, making it versatile for various projects, and it is put in a CNC metal case with an acrylic bottom, providing durability so you can have peace of mind if you take it anywhere. 

Features

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 2MB of onboard Flash memory
• Type-C connector, keeps it up to date, easier to use
• Onboard 0.99" 128 x 115 pixels 65K colourful IPS LCD display (with flat bottom) for clear colour pictures
• 4 x GPIO pins are adapted through the SH1.0 6PIN connector
• Has a CNC metal case with Acrylic dull-polish bottom plate
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 2 x I2C, 4 x 12-bit ADC
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 8 x Programmable I/O (PIO) state machines for custom peripheral support

Specifications

Resources

• Product Wiki
• Schematic
• Datasheet

Pinout

1. USB Type-C connector
   For programming, USB 1.1 with device and host support
2. RT9013-33GB
   500mA low dropout, low noise, ultra-fast LDO
3. QMI8658C
   IMU includes a 3-axis gyroscope and a 3-axis accelerometer
4. W25Q16JVUXIQ
   2MB NOR-Flash
5. RP2040
   Dual-core processor, up to 133MHz operating frequency
6. SH1.0 6PIN connector
   Adapting 4 x GPIO pins, the pin order is: GND, 3V3, GP26~GP29
7. BOOT Button
   Press it when powering on to enter download mode

Package Contents

• 1x RP2040 MCU Board
• 1x SH1.0 6-Pin cable