ESP32-S3 Development Board with 2.8" IPS Capacitive Touch Display (240x320)

This 2.8" IPS touch display dev board is a great choice for those looking to create easy-to-use interfaces and experiment with different ESP32-S3 projects.

The display has a fast ESP32-S3 with an Xtensa 32-bit LX7 dual-core processor, capable of reaching speeds up to 240MHz.

The board supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) alongside 512KB SRAM and 384KB ROM, complemented by 16MB Flash and 8MB PSRAM.

The IPS display has a resolution of 240x320 and 262K colours, supporting capacitive 5-point touch control through an I2C interface.

This board is well-suited for developing human-machine interfaces (HMI) and other projects. It easily runs GUI programs such as LVGL and includes various peripheral interfaces. Included with the board are 20 x 30mm 8Ω 2W cavity speakers for audio output.

Please note: this board uses a tiny MX1.25 connector for LiPo power. Most LiPo batteries on the market (including ours) use a larger JST fitting. We do not yet stock batteries with an MX1.25 connector, however, you can customise your battery with one of our 1.25mm pitch cables to make a compatible battery yourself (assuming you have the ability, knowledge and tools to do this safely).

Features

• Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
• Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
• Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
• Onboard 2.8" capacitive touch display, 240 x 320 resolution, 262K colour
• Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
• Adapting UART, I2C and some IO interfaces, integrating full-speed USB port
• Onboard speaker, QMI8658 6-axis sensor, RTC sensor, SD card slot. battery recharge management module, etc.
• Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

What's on Board

1. ESP32-S3R8
   Dual-core processor, up to 240MHz operating frequency
2. 16MB Flash
3. QST altitude sensor
   QMI8658C (6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer)
4. RTC chip
   PCF85063 RTC chip
5. PCM5101 audio decoder
6. Amplifier chip
7. Volume adjustment knob
8. Battery recharge manager
9. ME6217C33M5G
   Low dropout regulator, 800mA output (Max.)
10. Onboard ceramic antenna
11. IPEX1 connector and switching resistor
    Switching to use an external antenna via resoldering the resistor
12. TF card slot
    Supports TF cards up to 16GB
13. Battery power supply control button
    A relevant driver program is required
14. RESET button
15. BOOT button
16. USB Type-C port
17. 13-Pin multi-functional pin header
18. I2C header
    Connecting with internal chip, only supports the I2C peripherals and cannot be mapped to other functions
19. UART header
20. MX1.25 battery header
    MX1.25 2-Pin connector, for 3.7V Lithium battery, supports charging and discharging
21. RTC battery header
    For connecting rechargeable RTC battery
22. Speaker header
    Comes with 8Ω 2W 2030 speaker
23. Power indicator
24. Charge indicator
    The lithium battery charge indicator lights up when charging, and off when fully charged (the light status is uncertain when the battery is not connected)

Specifications

Resources

• Product Wiki
• Schematic

Package Contents

• 1x ESP32-S3 2.8" Capacitive Touch Display
• 1x SH1.0 12-Pin cable -100mm
• 2x SH1.0 4-Pin cable -100mm
• 1x 20 x 30mm speaker