The ESP32CAM-PSRAM is a development board for image recognition. It features an ESP32 (4MB Flash + 520KB RAM + 4MB PSRAM) chip and 2-Megapixel camera (OV2640).
The ESP32 cam offers plenty of storage with an extra 4 Mbyte PSRAM. It also supports image transmission via Wi-Fi and debugging through USB Type-C port.
The hardware comes with preloaded software, programmed by ESP-IDF. It is an application to run the Wi-Fi camera. The output image resolution is 600x800, and since it's a 2MP camera, you can optimise the software to output a better-resolution image.
Using processes:
Power the board via USB type-C or GROVE
Use your phone to Wi-Fi scan an AP name starting with 'm5stack-' and click to connect this AP.
Open up the web browser on your phone and visit 192.168.4.1
Features
CP2104 USB-to-TTL converter
ESP32-WROVER (PCB Antenna)
WIFI image transmission
OV2640 Camera
Camera Field of View: 150 degrees
Specifications
Resources
Parameters
Flash/RAM
4MB/500K
PSRAM
4M PSRAM
Image Sensor
OV2640
Maximum resolution
2M pixel
Output format
YUV(422/420)/YCbCr422,RGB565/555,8-bit compressed data,8-/10-bit Raw RGB data
Skip to content
