Discontinued item. Click here to view our Prototyping PCB section for alternative products.

1591B Proto Board for Raspberry Pi Pico [Discontinued] by BCRobotics - The Pi Hut

1591B Proto Board for Raspberry Pi Pico [Discontinued]

Name: 1591B Proto Board for Raspberry Pi Pico [Discontinued]
Brand: BCRobotics
SKU: RAS-204
Price: 3.50 GBP
Availability: OutOfStock

BCRoboticsSKU: RAS-204

£3.50

incl. VAT

excl. VAT

Compatible with:

Awesome Extras

Raspberry Pi Pico by Raspberry Pi - The Pi Hut

Raspberry Pi Raspberry Pi Pico

From £3.80 incl. VAT excl. VAT

Raspberry Pi Pico W by Raspberry Pi - The Pi Hut

Raspberry Pi Raspberry Pi Pico W

From £5.80 incl. VAT excl. VAT

Breadboard for Pico by Monk Makes - The Pi Hut

Monk Makes Breadboard for Pico

£4.20 incl. VAT excl. VAT

The 1591B Proto Board for Pico is designed to fit both the Raspberry Pi Pico and the Raspberry Pi Pico W with enough prototyping room for additional components, connectors or sensors.

Best of all, these fit directly inside the Hammond 1591BFLBK enclosure. Ideal for a one-off project that needs an easy enclosure and mounting solution!

Your Pico is attached using large solder pads – these are intended to be soldered using the castellated edges on the Pico and are easily accomplished using a normal soldering iron. The board breaks out all 40 GPIO pins from the Raspberry Pi Pico to easily accessible pins. The prototyping area measures 12 x 12 pins, but we have also included full-length 3.3V / GND rails and also a VSYS rail if you need access to that as well.

Raspberry Pi Pico, Enclosure and hardware are not included.

Features

Dimensions: 91 x 50mm
Plated through holes
1.6mm FR4 PCB material
Mounting Holes: 84mm x 43.25mm
Raspberry Pi Pico footprint with familiar breadboard prototyping area
Raspberry Pi Pico and Raspberry Pi Pico W compatible
1 oz. copper layer

Package Contents

1 x 1591B Proto Board for Raspberry Pi Pico

Payment & Accreditations

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Accreditations

4.20

Based on 5 reviews

Write Review

Product Reviews

Gregg W

Bath, United Kingdom

1591B Proto Board for Raspberry Pi Pico [Discontinued]

These boards are great. Used it to mount a voltage logic chip and to simply soldering a number of wires to my project. Great fit with the separate plastic box too.

Was this review helpful?

Yes

Report

1 year ago

Mike H

1591B Proto Board for Raspberry Pi Pico [Discontinued]

A great proto board for the Pico at a vey reasonable price.

Was this review helpful?

Yes

Report

2 years ago

David C

1591B Proto Board for Raspberry Pi Pico [Discontinued]

Nicely made (though the Monkmakes version is better) and it solders cleanly. But they both suffer from the defect of far too much shorting between pins. Hence the most you can make is 'push a button and a led comes on'. I want to make a motor drive for a mobile robot. Inserting the driver chip and another completely grabs all the rows so nothing else can be put in (see photo). Again, the GND/3V3 strips down the sides are useless. It is a GREAT pity as simply leaving all the pins floating would have made a really useful device. After all, when you solder you can say have a transistor leg, a resistor and connecting wire all in the same pinhole (I connect with 32awg). Shorting strips are fine for breadboard (1 wire per pin), but are inhibiting for solderable boards.

2 people found this review helpful.

Was this review helpful?

Yes

Report

2 years ago

Xavier E

1591B Proto Board for Raspberry Pi Pico [Discontinued]

Reviewer didn't leave any comments

Was this review helpful?

Yes

Report

3 years ago

Mike E

1591B Proto Board for Raspberry Pi Pico [Discontinued]

Suitable for directly soldered Picos only (no headers), with fixed 3V3 and Gnd rails down both sides. Each Pico pin is numbered but only on the bottom of the board, and connects to a single pad for directly connecting devices or jumper-wiring down to the dual 12x5 prototyping area, which includes additional Vsys/Gnd rails in the middle. Excellent product, although connection to the debug port will be tricky (but not impossible). Physically this board is slightly smaller than "Pico Proto PCB" despite having more (shorter) strips for the prototyping area.

3 people found this review helpful.

Was this review helpful?

Yes

Report

3 years ago