The 1591B Proto Board for Pico is designed to fit both the Raspberry Pi Pico and the Raspberry Pi Pico W with enough prototyping room for additional components, connectors or sensors. Best of all, these fit directly inside the Hammond 1591B enclosure (coming to The Pi Hut soon!). Ideal for a one-off project that needs an easy enclosure and mounting solution!
Your Pico is attached using large solder pads – these are intended to be soldered using the castellated edges on the Pico and are easily accomplished using a normal soldering iron. The board breaks out all 40 GPIO pins from the Raspberry Pi Pico to easily accessible pins. The prototyping area measures 12 x 12 pins, but we have also included full-length 3.3V / GND rails and also a VSYS rail if you need access to that as well.
Raspberry Pi Pico, Enclosure and hardware are not included.
- Dimensions: 91 x 50mm
- Plated through holes
- 1.6mm FR4 PCB material
- Mounting Holes: 84mm x 43.25mm
- Raspberry Pi Pico footprint with familiar breadboard prototyping area
- Raspberry Pi Pico and Raspberry Pi Pico W compatible
- 1 oz. copper layer
- 1 x 1591B Proto Board for Raspberry Pi Pico