1 Wire Pi Zero by ABelectronics - The Pi Hut
1 Wire Pi Zero by ABelectronics - The Pi Hut

1 Wire Pi Zero

ABelectronicsSKU: 102136
(4 Reviews)
£13
incl. VAT
excl. VAT
Only 4 units left

Compatible with:

Awesome Extras

RJ12 to RJ12 cable - 6P6C 3m by ABelectronics - The Pi Hut
(1 Review)
ABelectronicsRJ12 to RJ12 cable - 6P6C 3m
£4 incl. VAT excl. VAT
1 Wire Pi Plus by ABelectronics - The Pi Hut
ABelectronics1 Wire Pi Plus
£14 incl. VAT excl. VAT
Raspberry Pi Zero WH (with pre-soldered header) by Raspberry Pi - The Pi HutRaspberry Pi Zero WH (with pre-soldered header) by Raspberry Pi - The Pi Hut
(591 Reviews)
Raspberry PiRaspberry Pi Zero WH (with pre-soldered header)
£15.12 incl. VAT excl. VAT

The 1 Wire Pi Zero from AB Electronics is a communication board supporting the 1-Wire® protocol designed for use on the Raspberry Pi Zero. A 5V buffered I2C port is also provided on the board.

The 1-Wire® port on the 1 Wire Pi Zero is based around a DS2482-100 I2C to 1-Wire® bridge device. The DS2482-100 provides bi-directional protocol conversion between the I2C port on the Raspberry Pi and any attached 1-Wire® slave devices.

An ESD Protection Diode is used to protect the 1 Wire Pi Zero and Raspberry Pi from electrostatic spikes on the 1-Wire® port.

Connections to the 1-Wire® port can be made through the RJ-12 socket or the solder points on the PCB. ABelectronics have a knowledge base article for configuring and using the 1-Wire® port on your Raspberry Pi.

The 1 Wire Pi Zero is powered through the host Raspberry Pi using the GPIO port and extended pins on the GPIO connector allow you to stack the 1 Wire Pi Zero along with other expansion boards.

A 5V input port is also provided allowing you to use an external power supply on the 1-Wire® interface, reducing the load on the Raspberry Pi. If you choose to use the external 5V input please remove the solder jumper on the board to isolate the Raspberry Pi 5V bus.

Features

  • 1-Wire® to I2C host interface with ESD protection diode.
  • Stackable with other Raspberry Pi accessory boards.
  • Buffered 5V I2C port.
  • External 5V power input for 1-Wire® interface.
  • I2C address selection via solder jumpers.

Payment & Accreditations

Payment methods
Visa Mastercard Maestro PayPal Amazon Klarna

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Accreditations
1 Wire Pi Zero by ABelectronics - The Pi Hut
1 Wire Pi Zero by ABelectronics - The Pi Hut
Overall product rating out of 5: 4.50
Based on 4 reviews
Write Review
Clear Filters
Order By
Newest First
Oldest First
Most Popular
Highest Rating
Breakdown
2
2
0
0
0
Verified Customer
Matthias W
1 Wire Pi Zero
Nice gadget. Only drawback is that both Western sockets are connected in parallel, so long lines are difficult to handle. Actually, you can handle only one socket.
Was this review helpful?
Yes
Report
Share
7 years ago
Verified Customer
Erik P
1 Wire Pi Zero
Not really used it yet with anything but the hardware looks great as expected.
Was this review helpful?
Yes
Report
Share
8 years ago
Verified Customer
Víctor v
1 Wire Pi Zero
I bought recently a pi zero. I enjoyed with different projects. Definitely pick zero is awesome.
Was this review helpful?
Yes
Report
Share
8 years ago
Verified Customer
Graeme J
1 Wire Pi Zero
Easy to assemble, plenty of articles on the web. owserver installs easily but sometimes uses a lot of cpu. Easy to wire up and everything works well. Recommended
Was this review helpful?
Yes
Report
Share
8 years ago

New content loaded