This adaptor allows the Raspberry Pi to be used with an official Raspberry Pi 3 Micro-USB power supply (or 5V DC barrel jack) whilst allowing access to USB OTG data over a separate micro-USB connection. The barrel jack accepts 5.5 mm plugs (2.1/2.5 pin) supplying 5V.
USB Type-A (data and power) <> USB Data (Micro USB) and Power (Micro USB/Barrel jack).
Using with the Raspberry Pi 4
To use the adaptor with the Raspberry Pi 4 you need:
- A short USB-C to USB-A cable between Pi4 and the adaptor board
Micro USB cable to access USB OTG Data.
Power via either Micro USB Power Supply or Barrel jack (5v 2.4 Amp or higher PSU).
(Raspberry Pi/USB Cables/PSU/etc. not included)
Short cables are advised as the voltage drop over longer cables may cause problems.
Using a Cluster HAT node image (p1/p2/p3/p4) you can plug the USB data into a computer (Raspberry Pi, Win10, etc.) and access the system via either USB Gadget Ethernet or Serial Console.
Using a Cluster HAT node image (p1/p2/p3/p4) you can plug the USB DATA into a computer (Raspberry Pi, Win10 etc.) and access the system via either USB Gadget Ethernet or Serial Console.
|USB Type A||Micro USB (PWR)||Micro USB (USB)||Barrel Jack|
Payment & Accreditations
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.