Serial to Micro-USB adapter for Raspberry Pi Zero (FTDI version)

8086SKU: 8086-004
Price:
Sale price £7.80
incl. VAT
excl. VAT
Stock:
Only 8 units left
Quantity:

Awesome Extras

The Pi HutUSB-A to Micro-USB Cable
Sale priceFrom £1.50 incl. VAT excl. VAT
Raspberry PiRaspberry Pi Zero W
Sale price £15 incl. VAT excl. VAT

Get quick access to the serial console on your Pi Zero projects!

Note: Not compatible with the Raspberry Pi Zero 2 W (as the holes are slightly smaller on the GPIO)

This solderless serial adaptor for the Raspberry Pi Zero adds a micro-USB port to the Raspberry Pi's GPIO for serial connections! The board uses an FTDI FT234X IC, and Virtual COM port (VCP) drivers are available for many operating systems on the FTDI website.

We also offer a CDC (Communication Device Class) version here.

Using solderless pins, the adapter slides onto the back of a Raspberry Pi Zero's GPIO with no soldering, but if a permanent connection is required, the adapter can still be soldered to the GPIO header.

The adapter PCB is printed with an alignment guide: Ensure the white SQUARE on the PCB is aligned with the GPIO pin with the SQUARE gold pad on the Pi Zero GPIO pin 1.

It's advised to connect the adapter to the Pi Zero before connecting the USB cable to the adapter, to prevent the serial RX/TX pins from being connected before the ground pin. Once connected the Pi Zero can be powered on/off without issue.

When using with the Cluster HAT you will need to cut the pins down so only a few millimetres stick through the Raspberry Pi Zero and then file the ends round otherwise, the adapter will short on the back of an adjacent Raspberry Pi Zero. With use, the pins may become worn and need adjustment to keep in good contact with the Raspberry Pi Zero GPIO header.

Payment & Accreditations

Payment methods
Visa Mastercard Maestro PayPal Amazon Klarna

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Accreditations