USB GPS Receiver with 2m Extension Cable by DFRobot - The Pi Hut
USB GPS Receiver with 2m Extension Cable by DFRobot - The Pi Hut
USB GPS Receiver with 2m Extension Cable by DFRobot - The Pi Hut
USB GPS Receiver with 2m Extension Cable by DFRobot - The Pi Hut
USB GPS Receiver with 2m Extension Cable by DFRobot - The Pi Hut

USB GPS Receiver with 2m Extension Cable

DFRobotSKU: TEL0138
(11 Reviews)
£12.80
incl. VAT
excl. VAT
Only 12 units left

Compatible with:

Awesome Extras

Raspberry Pi 4 Model B by Raspberry Pi - The Pi HutRaspberry Pi 4 Model B by Raspberry Pi - The Pi Hut
(3213 Reviews)
Raspberry PiRaspberry Pi 4 Model B
From £33.30 incl. VAT excl. VAT
Raspberry Pi 4 Model B Starter Kit by The Pi Hut - The Pi HutRaspberry Pi 4 Model B Starter Kit by The Pi Hut - The Pi Hut
(2762 Reviews)
The Pi HutRaspberry Pi 4 Model B Starter Kit
From £60 incl. VAT excl. VAT
FLIRC Raspberry Pi 4 Case by FLIRC - The Pi HutFLIRC Raspberry Pi 4 Case by FLIRC - The Pi Hut
(498 Reviews)
FLIRCFLIRC Raspberry Pi 4 Case
£15.40 incl. VAT excl. VAT

This is an Ublox chip-based GPS receiver module of low power and high sensitivity that can receive 56 channels satellite signal.

Compared with traditional GPS receivers, it brings much more accurate and faster-positioning performance with stronger signals. Integrated with a built-in receiving antenna, this product adopts a high-precision positioning chip and industrial-grade manufacturing process so that it can meet the positioning requirements of both industrial-grade and personal use.

The GPS receiver has a battery inside for supplying power for storing satellite data, such as satellite signal status, final position, and time that would greatly increase the positioning speed at the module’s next boot. Besides, this receiver adopts USB interface, which can be conveniently used in main controllers like Raspberry Pi, NVIDIA, LattePanda.

The module has a 2m USB cable and its bottom is magnetic which makes it able to be easily attached to metal objects. It is suitable for vehicle navigation, handheld positioning, wearable devices, and other fields.

Specification

  • Chip: UBX-G7020-KT
  • Frequency: L1, 1575.42MHz/L2,1561.10MHZ/L3,1602.00MHZ
  • Baud Rate: 4800,9600,19200,38400,57600,115200bps
  • Receiving Channel: 56CH
  • Sensitivity: tracking -162dBm; Acquisition: 160dBm; cold start: -148dBm
  • Cold Start: 29s average
  • Warm Start: 3s average
  • Hot Start: 1s average
  • Accuracy: horizontal position accuracy<2.5M, SBAS<2.0M
  • Timing accuracy: 30ns
  • Update Rate: 1Hz
  • Outline Dimension: 38×49×16mm
  • USB Length: 2m
  • Operating Temperature: -40℃~85℃
  • Storage Temperature: -40℃~85℃

Documents

Shipping List

  • USB GPS Receiver with 2m Extension Cable (Compatible with Raspberry Pi/ LattePanda/ Jetson Nano) x1

Payment & Accreditations

Payment methods
Visa Mastercard Maestro PayPal Amazon Klarna

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Accreditations
USB GPS Receiver with 2m Extension Cable by DFRobot - The Pi Hut
USB GPS Receiver with 2m Extension Cable by DFRobot - The Pi Hut
USB GPS Receiver with 2m Extension Cable by DFRobot - The Pi Hut
USB GPS Receiver with 2m Extension Cable by DFRobot - The Pi Hut
USB GPS Receiver with 2m Extension Cable by DFRobot - The Pi Hut
Overall product rating out of 5: 4.73
Based on 11 reviews
Write Review
Clear Filters
Order By
Newest First
Oldest First
Most Popular
Highest Rating
Breakdown
9
1
1
0
0
Verified Customer
Leigh p
USB GPS Receiver with 2m Extension Cable
It works great, fast acquisition time too. Top sigma no cap!
Was this review helpful?
Yes
Report
Share
3 months ago
Verified Customer
James C
USB GPS Receiver with 2m Extension Cable
Easy to install and use, works nicely with GPSD. I use it with kstars on Stellarmate to suport astro imaging.
Was this review helpful?
Yes
Report
Share
9 months ago
Verified Customer
Joseph O
Catford, United Kingdom
USB GPS Receiver with 2m Extension Cable
Good product. Pretty straightforward to start getting data back from it after plugging it in.
1 person found this review helpful.
Was this review helpful?
Yes
Report
Share
2 years ago
Verified Customer
Richard S
Manchester, United Kingdom
USB GPS Receiver with 2m Extension Cable
Works perfectly, just plug it in, install Gpsd and configure and away you go. Had a little bit of an issue trying to use it with Java, but that was probably more of a misunderstanding on my side as I couldn't get Java to connect to the Gpsd externally and nothing happened, however running it all on the Pi worked fine.
1 person found this review helpful.
Was this review helpful?
Yes
Report
Share
3 years ago
Verified Customer
Nathan P
Boston, United Kingdom
USB GPS Receiver with 2m Extension Cable
Well built unit. Nice long cable for positioning for best signal reception. Magnetic base is a bonus!
1 person found this review helpful.
Was this review helpful?
Yes
Report
Share
3 years ago
Verified Customer
Martin R
Swindon, United Kingdom
USB GPS Receiver with 2m Extension Cable
Noticeably more sensitive than my older garmin handheld unit. Works easily with my laptop, and with a bit of setting up works well with my Raspberry pi. Now have a Raspberry pi location tracking system for my narrowboat travels. So happy with it I shall buy another for my laptop.
2 people found this review helpful.
Was this review helpful?
Yes
Report
Share
3 years ago
Verified Customer
Daedalus m
USB GPS Receiver with 2m Extension Cable
Reviewer didn't leave any comments
Was this review helpful?
Yes
Report
Share
3 years ago
Verified Customer
Steven D
Bury St Edmunds, United Kingdom
USB GPS Receiver with 2m Extension Cable
I purchased this as an alternative to a Ublox-7 GPS used with the Open CPN plotter on my RPi4. It worked immediately on plugging in with no additional set up tasks needed. It generally works indoors and the the 2m USB cable allows positioning near a window.
1 person found this review helpful.
Was this review helpful?
Yes
Report
Share
3 years ago
1
2

New content loaded