Teensy 3.5 + Header Strips [Discontinued]

The awesome new Teensy 3.5 is a small, breadboard-friendly development board designed by Paul Stoffregen and PJRC. Teensy 3.5 brings a low-cost 32-bit ARM Cortex-M4 platform to hobbyists, students and engineers, using an adapted version of the Arduino IDE (Teensyduino) or programming directly in C language. Teensy 3.5 is an upgrade over 3.2, for when you need even more power!

Version 3.5 features a 32 bit 120 MHz ARM Cortex-M4 processor with floating point unit. All digital pins are 5 volt tolerant. The unique specs for the 3.5 are:

The latest in the line of very powerful, USB-capable microcontrollers, the Teensy 3.5 and 3.6 development boards are faster, more capable, and bigger, putting even more pins on a solderless breadboard. Teensy 3.5 offers a little bit less in its features (MCU, RAM, Flash, clock and some peripherals) which makes it slightly cheaper than Teensy 3.6. Teensy 3.5 has 5V tolerance on all digital I/O pins. Only Teensy 3.6 has a USB High Speed (480 Mbit/sec) port accessed using 5 pins on the board.

Free headers!

We now include free headers with all of our unsoldered Teensy boards! This board comes with two 36-way header strips for you to cut down and solder.

Please note: Teensy 3 boards are not official Arduino-brand products. Although the Teensyduino IDE has been adapted so that many Arduino projects will work with the Teensy, there will still be a lot of libraries and shields that may not work with this device! If you're new to microcontrollers, we suggest going with a classic Arduino UNO since all Arduino projects, examples and libraries will work with it.

More Specifications, Details & Features:

Information, documentation and specs are on the Teensy site. Please check it out for more details!

Technical details

Product Dimensions: 62.3mm x 18.0mm x 4.2mm / 2.5" x 0.7" x 0.2"

Product Weight: 4.8g / 0.2oz

• Diagram (front)
• Diagram (back)