Coming Soon

Snap-In Panel Mount Cable - USB-A Socket to 2 Wires

Snap-In Panel Mount Cable - USB-A Socket to 2 Wires

Name: Snap-In Panel Mount Cable - USB-A Socket to 2 Wires
Brand: Adafruit
SKU: ADA6072
Price: 2.40 GBP
Availability: OutOfStock

AdafruitSKU: ADA6072

£2.40

incl. VAT

excl. VAT

Coming Soon

Awesome Extras

Male to Male USB 3.0 Cable (Type A to A) - The Pi Hut

The Pi Hut Male to Male USB 3.0 Cable (Type A to A)

From £3 incl. VAT excl. VAT

The Pi Hut USB 3.0 Extension Cable

From £3 incl. VAT excl. VAT

USB-A to USB-C Cable with On/Off Switch - The Pi Hut

The Pi Hut USB-A to USB-C Cable with On/Off Switch

£3 incl. VAT excl. VAT

Small Alligator Clip Test Lead (set of 12) - The Pi Hut

The Pi Hut Small Alligator Clip Test Lead (set of 12)

£3.40 incl. VAT excl. VAT

This panel-mount cable is great for making USB power connections with a panel-mount setup. On the rectangular panel-mount side, you get a USB Type-A connector; the other end has power and ground lines. We particularly like that the panel-mount part is very small and snaps in, and you get a wire pigtail cable on the other end for quick integration.

What's special about this, you ask? It's a Snap-In Panel Mount Cable - much easier than a classic panel mount cable; you don't need screws or drills for installation. Cut out a rectangular hole about 2cm by 1cm, up to 4mm thick, and then snap the panel in; it will fit snugly and cover up any burrs, so your cut doesn't have to be so precise. Perfect for adding a USB A charging/power port to your project enclosure!

The red cable is 5V, and the black wire is ground. This one does not include data lines—it will just provide 5V power to a client device.

We also have a 4 wire version here

The Voltage Detector and cables are NOT included