The Shelly1PM Gen3 is a small form factor Wi-Fi-operated 16A smart switch with precise power measurement which allows remote control of lights and other electrical appliances (16A AC max/ 10A DC max) through a mobile phone, tablet, PC, or home automation system. It can work standalone in a local Wi-Fi network or it can also be operated through cloud home automation services.
Shelly 1PM Gen3 can be accessed, controlled and monitored remotely from any place where the user has internet connectivity, as long as the device is connected to a Wi-Fi router and the Internet. It can be retrofitted into some electrical wall boxes, behind power sockets and light switches or other places with limited space - including the Shelly Wall Switch 1.
Shelly 1PM Gen3 has an embedded web interface which can be used to monitor and control the device, as well as adjust its settings.
Different types of actions, scenarios, and schedules can be set to sync your environment to your daily activities or business needs, via the Shelly smart home ecosystem, including the Shelly Smart Control app - or link it with a popular home automation software such as Home Assistant via a Raspberry Pi!
Note:You may require a neutral wire to use this product. Please research the device and your home wiring (safely, see below) before purchasing.
⚠️Caution - Read Before Buying⚠️
Before beginning the installation, please read this guide and any other documents accompanying the device carefully and completely
Danger of electrocution. The mounting/installation of the device should be performed by a qualified person (electrician)
Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of the law or refusal of legal and/or commercial guarantee (if any)
Allterco Robotics (makers of Shelly products) and Mann Enterprises LTD are not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure to follow the user and safety instructions in the printed guide accompanying this product (also available in the resources section below)
Do not connect the device to appliances exceeding the given max load.
Use the device only with a power grid and appliances which comply with all applicable regulations. Short circuit in the power grid or any appliance connected to the device may damage the device.
Before starting, wire check that the breakers are turned off and there is no voltage on their terminals. This can be done with a phase meter or multimeter. When you are sure that there is no voltage, you can start wiring the cables.
Features
Precise and real-time power metering with free cloud data storage for analysis and energy usage optimization
Max switching voltage - 240VAC/30V DC
Max switching current - 16A/240VAC 10A/30VDC
New processor - ESP-Shelly-C38F chip with an increased memory of 8 MB
Skip to content
