The Shelly Dimmer 0/1-10V PM Gen3 is a smart dimming controller with power measurement built-in, which allows remote control of 0-10V and 1-10V drivers through most popular home automation platforms and protocols, including Home Assistant, Alexa, Google Home, the Shelly Smart Control app or your preferred automation platform.
It can work standalone in a local Wi-Fi network or it can also be operated through cloud home automation services. The device is a current sourcing controller and provides support for 0-10V and 1-10V types of drivers.
Different types of actions, scenarios, and schedules can be set to sync your environment to your daily activities or business needs, via the Shelly smart home ecosystem, including the Shelly Smart Control app - or link it with a popular home automation software such as Home Assistant via a Raspberry Pi!
Note:You may require a neutral wire to use this product.Please research the device and your home wiring (safely, see below) before purchasing.
⚠️Caution - Read Before Buying⚠️
Before beginning the installation, please read this guide and any other documents accompanying the device carefully and completely
Danger of electrocution.The mounting/installation of the device should be performed by a qualified person (electrician)
Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of the law or refusal of legal and/or commercial guarantee(if any)
Allterco Robotics (makers of Shelly products) and Mann Enterprises LTD are not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure to follow the user and safety instructions in the printed guide accompanying this product (also available in the resources section below)
Do not connect the device to appliances exceeding the given max load.
Use the device only with a power grid and appliances which comply with all applicable regulations. Short circuit in the power grid or any appliance connected to the device may damage the device.
Before starting, wire check that the breakers are turned off and there is no voltage on their terminals. This can be done with a phase meter or multimeter. When you are sure that there is no voltage, you can start wiring the cables.
Features
Supports 0-10V and 1-10V types of drivers (lights, motors, valves, etc.)
Wi-Fi and Bluetooth-operated
One/dual button dimming mode (use with physical switches)
Customizable thresholds and offsets for temperature, humidity and light if used with Plus Add-on
Power measurement: Precise monitoring of energy consumption. Information about voltage (V), current (A) and consumption (W) is displayed.
Safety: Оver current/voltage/power protections
Supports “Night mode”: Automatically sets the lights' brightness at a low level during the night hours
Wi-Fi Range Extender & BLE Gateway
Can be used as a Bluetooth gateway for Shelly BLU sensors such as the Shelly BLU Motion
Equipped with a new processor & increased flash memory - ESP Shelly
No hub required! Easy control through the Shelly Smart Control app, most platforms and protocols, as well as voice assistants. Use it with Alexa, Home Assistant, or your preferred automation platform
Supports KNXnet / IP communication
Shelly Plus Add-On compatible: Supports connection with the optional Shelly sensor interface to measure different data (humidity, temperature, etc. - not currently stocked)
Use Cases
Control brightness of dimmable lights within the 0-10V range to set the perfect brightness
Create smart schedules to have lights automatically adjust their brightness throughout the day
Retrofit your existing lighting system with the Dimmer 0/1-10V PM Gen3 and continue using your current switches
Sync your lights with sunrise and sunset times easily using smart schedules
Activate a night mode for reduced brightness during nighttime hours
Integrate with third-party systems like Home Assistant, Google Home, Alexa and SmartThings for expanded control options
Utilise the device to dim lights up or down with a single or double button press
Monitor and measure power usage of connected lights for energy management
Specifications
Size (HxWxD)
38.5x43.5x17mm
Weight
28.5g
Screw terminal max torque
0.4 Nm / 3.5 lbin
Conductor cross-section
0.2 to 2.5 mm² / 24 to 14 AWG (solid, stranded, and bootlace ferrules)
Conductor stripped length
5 to 6 mm / 0.20 to 0.24 in
Mounting
Wall console/behind wall/ceiling construction
Shell material
Plastic
Shell color
Shell: Pantone 2736C (blue) Print: White
Connector colour
Black
Ambient working temperature
-20 °C to 40 °C / -5 °F to 105 °F
Humidity
30 % to 70 % RH
Max. altitude
2000 m / 6562 ft
Power supply
110-240 V~ 50/60 Hz
Power consumption
< 1.5 W
Neutral not needed
No
0-10V/1-10V voltage control type
Current sourcing
External protection
16 A, tripping characteristic B or C 6 kA interrupting rating Energy limiting class 3
Max. switching voltage
240 V~
Max. switching current
13 A
Max. control current
35 mA
Voltmeter (AC)
110 V - 240 V
Voltmeter accuracy
±10 %
Ammeter (AC)
50 mA - 16 A
Ammeter accuracy
±10 %
Power and energy meters
Active and apparent power Active and apparent energy Power factor
Measurement data storage
No
Internal-temperature sensor
Yes
Wi-Fi
Protocol
802.11 b/g/n
RF band
2401 - 2495 МHz
Max. RF power
< 20 dBm
Range
Up to 30 m / 100 ft indoors Up to 50 m / 160 ft outdoors (Depends on local conditions)
Bluetooth
Protocol
4.2
RF band
2400 - 2483.5 MHz
Max. RF power
< 4 dBm
Range
Up to 10 m / 33 ft indoors Up to 30 m / 100 ft outdoors (Depends on local conditions)
Skip to content
