Olimex DuinoMite-Mini Maximite-Compatible Basic Computer

OlimexSKU: 105380
Price:
Sale price £25.90
incl. VAT
excl. VAT
Stock:
Only 9 units left
Quantity:

Awesome Extras

Save 56%
USB-A to USB Mini-B Cable - Black - The Pi Hut
The Pi HutUSB-A to USB Mini-B Cable - Black
Sale priceFrom £2.20incl. VAT excl. VAT
VGA to VGA Cable 2m (SVGA) - The Pi Hut
The Pi HutVGA to VGA Cable 2m (SVGA)
Sale price £3 incl. VAT excl. VAT
SanDisk MicroSD Card (Class 10 A1) - The Pi HutSanDisk MicroSD Card (Class 10 A1) - The Pi Hut
SanDiskSanDisk MicroSD Card (Class 10 A1)
Sale priceFrom £6 incl. VAT excl. VAT
USB to 2.1mm Male Barrel Jack Cable - The Pi HutUSB to 2.1mm Male Barrel Jack Cable - The Pi Hut
The Pi Hut Jumper Bumper Pack (120pcs Dupont Wire) - The Pi HutThe Pi Hut Jumper Bumper Pack (120pcs Dupont Wire) - The Pi Hut

The Olimex DuinoMite-Mini is a Maximite-compatible Basic computer, originally designed by Geoff Graham, with additional features.

The DuinoMite allows you to program in BASIC language and includes a VGA and PS/2 keyboard interface, so you can develop and write your code in Basic without the need for any other computers.

You can store your code on a Micro-SD card and execute it on power-up through autoexec.bas main code.

Key Features

  • PIC32MX795F512H processor running at 80Mhz with 128KB RAM and 512KB Flash
  • Linear power regulator, requires EXACTLY 5V to the DC POWER JACK
  • USB Device DuinoMite-Mini can take power from Mini-USB also, there is 3-way jumper which selects which source is used the DC POWER JACK or the USB
  • Micro-SD card socket
  • UEXT connector
  • GPIO connector
  • PS2 Keyboard connector
  • VGA connector
  • RESET button
  • USER buttons
  • Three status LEDs
  • Commercial temperature operation -0+70C
  • Noise immunity
  • ICSP programming connector for programming and debugging
  • 32,768 KHz low-frequency crystal allows implementation of RTC and low power modes

Resources

Documents

Hardware

Software

Community

Projects

Warning

Do not use the "programmer-to-go" button when there is no image on the OLIMEX PIC-KIT3 or MICROCHIP PIC-KIT3 because that might put your microcontroller in an irrecoverable state. We have tested the mentioned scenario and we can confirm it destroys PIC32 chips (using both our and the original Microchip PICKIT3). We cannot take responsibility if you break your chip this way. For more info check the following: www.microchip.com/forums/m635420.aspx.

Package Contents

  • 1x DuinoMite-Mini board

Payment & Accreditations

Payment methods
Visa Mastercard Maestro PayPal Amazon Klarna

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Accreditations