Adding this USB-powered speaker to your Raspberry Pi is one of the easiest ways to play great audio out of your project. It's also an ideal affordable speaker option for your Raspberry Pi 400!
With just a single USB connection with no other cables, power supplies or any charging required, it's the easiest and most compact audio option for your Raspberry Pi.
The unit has two speakers inside and is powered by a single Raspberry Pi USB port.
Setup & Usage
Since some very recent Raspberry Pi OS changes, we've found that installing Pulse Audio (Raspberry Pi's preferred sound server) helps to get these USB speakers working properly.
First, update your Raspberry Pi. In a new terminal window, run the following commands in order:
sudo apt-get update
sudo apt full-upgrade
sudo reboot
Once your Raspberry Pi reboots, install Pulse Audio with the following command (it may already be installed):
sudo apt-get install pulseaudio
Then reboot your Raspberry Pi again with this command:
sudo reboot
Once booted, from the Raspberry Pi Desktop right-click the audio icon in the taskbar and select the correct (USB) audio device.
Speaker Test
You can also test the speaker from the terminal as well (follow the setup steps above first):
Run 'cat /proc/asound/modules' to see what devices are being detected.
The USB speaker is usually listed as device 1
Run 'speaker-test -c2 -twav -l7 -D plughw:1,0' - that should play a female test voice.
We also sell a handy mini-USB Microphone for the Raspberry Pi if your project needs a simple mic solution.
Tech Specs
Voltage: 5V
Power: 2 x 2W
Impedance: 4 ohm
Cable Length: 116cm
Dimensions: 84.0mm x 43.0mm x 32.0mm
Weight: 73.6g
Payment & Accreditations
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Skip to content
