The M5Stack PoESP32 Unit is an ESP32 Ethernet Unit that supports PoE (Power Over Ethernet). This module adopts an ESP32 as a built-in MAC and IP101G as a physical layer transceiver.
The unit has default firmware with ESP-AT and supports TCP, MQTT and HTTP protocols. It can connect to a server with simple AT commands through a serial port, achieving data transmission and remote control functions. This module simplifies wiring and saves labour cost with PoE power supply, and reserves the alibility for secondary development to meet your requirements.
Features
Embedded ESP32 main controller
PHY solution
Transceiver model IP101G
IEEE 802.3/802.3u standard
Ethernet Interface
PoE standard: PoE IEEE802.3 AF / Support maximum load power 6W
RJ45 network port 10/100Mbps
Communication / download interface
Default firmware is ESP-AT / Support secondary development to implement TCP Client/HTTP/CoAP and other protocols
Programmable/support secondary development, reserve program download interface
Power supply
HY2.0-4P interface 5V DC power supply
PoE power supply (PoE IEEE802.3 AF)
Development method
AT command, UART: 9600bps default
Development Platform: UIFlow(coming soon), Arduino, ESP-IDF
Package Contents
1x UNIT PoESP32
1x HY2.0-4P Cable (20cm)
1x Instruction manual
Specifications
Specifications
Parameters
ESP32-WROOM-32U/D
240MHz dual-core, 600 DMIPS, 520KB SRAM (without integrated 3D antenna, does not support WiFi&BLE wireless function)
Flash
4MB
PHY
IP101G: IEEE 802.3/802.3u
MAC-PHY Interface Type
RMII
PoE Specifications
PoE IEEE802.3 AF Specifications / Maximum Power 6W
Ethernet Interface Specifications
RJ45 10/100Mbps
Reserved interface
1x HY2.0-4P interface, 1x program download interface
Skip to content
