The Home Assistant Voice Preview Edition is the first voice assistant built to seamlessly integrate with Home Assistant, from the founders of Home Assistant, Nabu Casa!
HA Voice is open-source, privacy-focused, with dual microphones and advanced audio processing - all contained in a premium enclosure. Its advanced audio processor and dual microphones allow it to hear your commands and control devices.
Tactile controls, the injection-moulded case and the LED ring lend to its premium feel, allowing it to blend into the home. Built on ESPHome, sensors can also be added via the included Grove port, and an audio jack is onboard for connecting other speakers (or just use the internal speaker).
Note
Power supply not included. This device requires a 5V 2A USB-C power supply. We recommend the compact, high-quality Raspberry Pi 15W USB-C power supply which offers 5V 3A.
Voice Preview Edition requires Home Assistant to operate.
Weaker Home Assistant hardware can lead to slow speech processing. If you have lower-power Home Assistant hardware, you should offload speech processing to Home Assistant Cloud.
Features
Built for Home Assistant: The first voice hardware designed by the team driving the development of Home Assistant, and built from the ground up to work with Home Assistant.
Preview the future of voice today: Home Assistant is rapidly advancing their open source, privacy-focused voice assistant for the home. Preview Edition was built to help more people participate in development and allow anyone to preview the future of voice today.
The easiest way to start with Assist: Just connect it to USB-C power(cable and power supply not included) and it will connect with Home Assistant via an intuitive installation wizard. No assembly is required.
The private voice assistant: Pairing Voice Preview Edition with powerful Home Assistant hardware can allow it to run fully locally, or offload its audio processing to the privacy-focused Home Assistant Cloud. It also includes a hardware mute switch that physically cuts power to the microphones.
Advanced Audio Processing: Dual microphones and the XMOS audio processor cuts through noise to hear your voice clearly.
Visual and audio feedback: The multicoloured LED ring displays when it's listening, volume levels, and more. Get sensor readings, timers and other feedback via its speaker. Connect an external speaker for media playback via its 3.5mm headphone jack.
Physical controls: The rotary dial lets you control volume and LED brightness, while the multifunction button can trigger Assist or be customized in Home Assistant.
Blends into the home: Its small, unobtrusive design is injection-molded giving it a premium look, and its tactile controls give it a premium feel.
Expandable: Built on ESPHome, sensors can be added via the included Grove port.
Fully open and community-driven: Completely open software, firmware, and hardware lets you make it work the way you want. All backed by a dedicated community customizing and adding functionality.
Specifications
SoC
ESP32-S3 SoC with
16 MB of FLASH storage
8 MB octal PSRAM
Audio Processing
XMOS XU316
Featuring:
Echo cancellation
Stationary noise removal
Auto gain control
Power/data
USB-C, 5 V DC, 2 A
Radios
2.4 GHz Wi-Fi
Bluetooth 5.0 Low Energy
Audio output
3.5 mm (⅛”) stereo headphone jack
Digital to analog converter (DAC):
TI AIC3202
48 kHz sampling rate
Physical controls
Multipurpose button
Rotary dial for volume and other input
Mute switch that physically cuts power to the microphone
Microphone & speaker
Internal speaker
Internal dual-mic array
Hardware mute switch
Dedicated I2S lines for audio in and out
Expandability
Grove port to connect sensors or other accessories
Easy to open - no clips, only screws to access the internals
Exposed pads on PCB for modding
Software
ESPHome preloaded
Fully open-source firmware for both the ESP32 and XMOS chip
Requirements
Home Assistant already configured on another device.
For fully local speech processing, it is recommended to have a Home Assistant system based on an Intel N100 or higher. Weaker hardware will require a Home Assistant Cloud subscription for optimal speech processing performance.
Language support
Check Home Assistant Assist documentation for an up-to-date list.
Environmental conditions for operation
Indoor use only
O °C to 30 °C
32 °F to 86 °F
Humidity: non-condensing
Keep in a dry, not excessively dusty environment as this can cause damage to the unit
Power supply not included. This device requires a 5V 2A USB-C power supply. We recommend the compact, high-quality Raspberry Pi 15W USB-C power supply which offers 5V 3A.
Pre-Order Info
We have requested more Home Assistant Voice stock from Nabu Casa and are awaiting shipping dates. You can pre-order to secure a unit, and we'll share estimated shipping timescale updates via email as well as updating this section.
Skip to content
