E-Ink Display pHAT - 2.13" (250x122)

Looking for an eInk / ePaper display for your Raspberry Pi or Raspberry Pi Zero? Look no further! This great little black/white eInk/ePaper display from Waveshare is perfect for adding a low-power display to your project.

Also available in yellow/black/white and red/black/white! User Guide here!

ePaper / eInk displays are designed to replicate the appearance of ink on paper. Unlike regular displays, which lose their image when power is removed, eInk screens are able to hold text and images indefinitely, even without power. ePaper screens are therefore ultra-low power, designed to have a wide viewing angle and additionally have limited reflection under sunlight. The applications are limitless!

The E-Ink display modules from waveshare come complete with an embedded controller PCB, communicating via SPI interface, and support partial refresh.

This module includes a 2.13" (250x122) eInk display & pHAT PCB format, designed to plug directly onto your Raspberry Pi Zero or Zero W.

New Revision - V4

Please note our stock is currently board version V4 - more details can be found on the Waveshare Wiki. Some 3rd party software may not work with this new revision - check with the software owner first. For example, with Pwnagotchi you may need to amend the code (see the GitHub issues, for example, entries such as this and this)

Features

• No backlight, keeps displaying last content for a long time even when power down
• Ultra-low power consumption, basically power is only required for refreshing
• Compatible with Raspberry Pi 2B/3B/Zero/Zero W
• Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
• Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications

• Operating voltage: 3.3V/5V
• Interface: SPI 3-wire/4-wire
• Outline dimension: 65mm × 30.2mm
• Display size: 48.55mm x 23.71mm
• Dot pitch: 0.194 × 0.194
• Resolution: 250 × 122
• Display colour: black, white
• Grey level: 2
• Partial refresh time: 0.3s
• Full refresh time: 2s
• Refresh power: 26.4mW(typ.)
• Standby current: <0.01uA (almost none)
• Viewing angle: >170°

Resources

• Product Wiki - https://www.waveshare.com/wiki/2.13inch_e-Paper_HAT
• Version revision identification - https://www.waveshare.com/wiki/2.13inch_e-Paper_HAT#Versions

Interface

Package Contents

• 1x 2.13" e-Paper HAT
• 1x RPi screws pack (2x screws, nuts, standoffs)
• 1x PH2.0 20cm 8-Pin cable