Anemometer Wind Speed Sensor w/Analog Voltage Output by The Pi Hut - The Pi Hut
Anemometer Wind Speed Sensor w/Analog Voltage Output by The Pi Hut - The Pi Hut
Anemometer Wind Speed Sensor w/Analog Voltage Output by The Pi Hut - The Pi Hut

Anemometer Wind Speed Sensor w/Analog Voltage Output

The Pi HutSKU: ADA1733
(4 Reviews)
£43.20
incl. VAT
excl. VAT
Only 5 units left

An anemometer is a device used for measuring wind speed, and is a common weather station instrument. This well made anemometer is designed to sit outside and measure wind speed with ease.

To use, connect the black wire to power and signal ground, the brown wire to 7-24VDC (we used 9V with success) and measure the analog voltage on the blue wire. The voltage will range from 0.4V (0 m/s wind) up to 2.0V (for 32.4m/s wind speed). That's it! The sensor is rugged, and easy to mount. The cable can easily disconnect with a few twists and has a weatherproof connector.

This anemometer is not IP rated, so it is not designed to withstand water ingress without additional gasketting or protection.

Technical Details

Note: As of 11/06/2014, shipping weight has been changed on this product to match UPS' new dimensional weight regulations.

Dimensions:

  • Height (base to center): 105mm / 4.1"
  • Center out to Cup: 102mm / 4"
  • Arm Length: 70mm / 2.8"
  • Weight: 111.8g

Wire Dimensions:

  • Wire Length: 99cm / 39"
  • Plug Length: 30mm / 1.2"
  • Diameter (thickness): 4.8mm / 0.2"

Specifications

  • Output: 0.4V to 2V
  • Testing Range: 0.5m/s to 50m/s
  • Start wind speed: 0.2 m/s
  • Resolution: 0.1m/s
  • Accuracy: Worst case 1 meter/s
  • Max Wind Speed: 70m/s
  • Connector details: Pin 1 - Power (brown wire), Pin 2 - Ground (black wire), Pin 3 - Signal (blue wire), Pin 4 not connected

Payment & Accreditations

Payment methods
Visa Mastercard Maestro PayPal Amazon Klarna

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Accreditations
Anemometer Wind Speed Sensor w/Analog Voltage Output by The Pi Hut - The Pi Hut
Anemometer Wind Speed Sensor w/Analog Voltage Output by The Pi Hut - The Pi Hut
Anemometer Wind Speed Sensor w/Analog Voltage Output by The Pi Hut - The Pi Hut
Based on 4 reviews
Write Review
Clear Filters
Order By
Newest First
Oldest First
Most Popular
Highest Rating
Breakdown
2
2
0
0
0
Verified Customer
David R
Oldham, United Kingdom
Anemometer Wind Speed Sensor w/Analog Voltage Output
Yes it's up and running had to alter the program a couple of times, floats, variables, to get more accurate readings but a vast improvement on the digital setup, not as much code in fact about a tenth as with the digital pulse out anemometer, and a lot of circuit using a picc , with the analoge anemometer just an arduino nano, now working on a bluetooth connection so I do not need to go into the porch to get a reading. I would recommend this anemometer to anyone thanks Dave.
Was this review helpful?
Yes
Report
Share
3 years ago
Verified Customer
Denis S
Anemometer Wind Speed Sensor w/Analog Voltage Output
Tested using vacuum cleaner on blow n using a wind gauge + volt meter got o/p over 2v. Eventually be using an op amp comparator to work relay to lower solar arrays at high wind speed.
Was this review helpful?
Yes
Report
Share
5 years ago
Verified Customer
Keith B
Anemometer Wind Speed Sensor w/Analog Voltage Output
Study and seems well made - instructions sparse and could do with a simple test method example - I won't tell it's working properly till I get into my 1st project - have lashed up 9v battery and multimeter but no means a conclusive test
Was this review helpful?
Yes
Report
Share
5 years ago
Verified Customer
Jason T
Anemometer Wind Speed Sensor w/Analog Voltage Output
Item not used yet in a project but looks like it will do the trick. Cheers.
Was this review helpful?
Yes
Report
Share
6 years ago

New content loaded