Skip to content
Login / Signup
Cart
Your cart is empty
The 3.7" E-Ink/E-Paper Display (416x240, Monochrome) uses the UC8253 chipset and provides daylight-readable, low-power performance. It connects via a 24-pin FPC connector and works with supported driver boards for easy integration.
E-Ink/E-Paper displays make for great low-power displays that are daylight visible and keep their image even when depowered. For folks who want to DIY their own E-Ink setups, this is a 3.7" 416x240 Pixel Monochrome Black/White EPD - Bare Display.
Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!
Please note: this is the bare display element. You need to plug it into a board with a 'standard' 24-pin FPC e-paper connector. We recommend checking out and picking up a matching driver board:
This is a 3.7" Monochrome Black/White display. It has 416x240 black ink pixels and a white-ish background. It uses the UC8253 chipset, so make sure whatever firmware code you are planning to use has support for it. The Arduino library we wrote does all the work for you; you can just interface with it as if it were an Adafruit_GFX compatible display.
Despite having only monochromatic pixels, it's possible to get nice-looking graphics on eInk displays: Check out our guide on dithering for how to get the best output from these panels.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
