Login / Signup
Cart
Your cart is empty
This 2.8" LCD touch display has a 240 x 320 resolution and 262K colours, providing clear and vibrant visuals on its TFT display panel. It uses the ST7789T3 display driver and the CST328 touch driver, to run the display smoothly and provide an easy-to-use and reliable touch screen.
The module connects to the host board via a 13-pin connector and an 18-pin FPC slot, making it easy to integrate with various systems such as Raspberry Pi, ESP32S3, Raspberry Pi Pico and Arduino. Ideal for DIY projects and interactive displays, this display brings colourful and responsive touch capabilities to your projects.
Note: Raspberry Pi 5 is NOT included
Operating Voltage | 3.3V / 5V |
Display Driver | ST7789T3 |
Display Interface | 4-wire SPI |
Display Panel | TFT |
Pixel Size | 0.18 x 0.18mm |
Display Size | 43.20 x 57.60mm |
Resolution | 240 x 320 pixels |
Touch Driver | CST328 |
Touch Interface | I2C |
Touch Type | Capacitive |
Touch Points | 5-point touch |
Module Size | 50.54 x 73.06mm |
PIN | Description | 13-Pin No. | 18-Pin No. |
VCC | Power (3.3V / 5V input) | 1 | 1 |
GND | Ground | 2 | 3 |
MISO | SPI MISO pin | 3 | 6 |
MOSI | SPI MOSI pin | 4 | 5 |
SCLK | SPI CLK pin | 5 | 4 |
LCD_CS | LCD Chip Selection, low active | 6 | 9 |
LCD_DC | LCD Data/Command selection (high for data, low for command) | 7 | 7 |
LCD_RST | LCD Reset pin, low active | 8 | 8 |
LCD_BL | LCD Backlight pin | 9 | 2 |
TP_SDA | Touch panel Data pin | 10 | 14 |
TP_SCL | Touch panel Clock pin | 11 | 13 |
TP_INT | Touch panel Interrupt pin | 12 | 15 |
TP_RST | Touch panel Reset pin, low active | 13 | 12 |