Battery Holder (10 x AA) - The Pi Hut

Battery Holder (10 x AA)

ModMyPiSKU: MMP-1191
£2.50
incl. VAT
excl. VAT
Only 20 units left

Awesome Extras

9V Battery Connector Clip with Bare Wires9V Battery Connector Clip with Bare Wires
The Pi Hut9V Battery Connector Clip with Bare Wires
£1 incl. VAT excl. VAT
X-Power 1.5V AA Alkaline Batteries (4-Pack)X-Power 1.5V AA Alkaline Batteries (4-Pack)
ANSMANNX-Power 1.5V AA Alkaline Batteries (4-Pack)
£4.50 incl. VAT excl. VAT
2500mAh NiMH Rechargeable AA Batteries (4-Pack) - The Pi Hut2500mAh NiMH Rechargeable AA Batteries (4-Pack) - The Pi Hut
ANSMANN2500mAh NiMH Rechargeable AA Batteries (4-Pack)
£17.90 incl. VAT excl. VAT

Our favourite way to power our robots is using AA batteries. They're readily available and pose a lower risk of fire compared to Lithium-based batteries, especially when learning about robotics.

To secure your batteries you need a good holder, and we have sizes from 2xAA to 10xAA to provide the right power for your projects.

This 10x AA holder is good for 12V with rechargeable NiMH batteries or 15V with 1.5V alkaline cells.

Each holder comes with a PP3 style connector (the same as on a 9V battery).

To use this holder you will need a 9v (PP3) style connection cable (not included). If you are going to draw a large amount of current, for example powering motors, we recommend using our 9V High-Quality Connector.

Specification

  • Battery Cell Size: AA
  • Number of Cells: 10
  • Body Material Polypropylene Resin
  • 60mm x 77mm x 30mm
  • PP3 Clip Connector

Payment & Accreditations

Payment methods
Visa Mastercard Maestro PayPal Amazon Klarna

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Accreditations
Battery Holder (10 x AA) - The Pi Hut