Small OLED modules are a popular option for adding a simple display to your project for monitoring data, displaying IP addresses, weather, counters or anything else you decide to code!
This 0.96" module is small, lightweight and features a convenient horizontal pin header for wiring up to your microcontroller.
The convenient mounting holes make it easy to embed this display to a custom enclosure for your project.
Resources
Tech Specs
DRIVER CHIP |
SSD1306 |
INTERFACE |
3-wire SPI, 4-wire SPI, I2C |
RESOLUTION |
128*64 |
DISPLAY SIZE |
0.96inch |
COLORS |
1/4 yellow section, 3/4 blue section |
VISIBLE ANGLE |
>160° |
OPERATING TEMP. (℃) |
-20~70 |
STORAGE TEMP. (℃) |
-30~80 |
OPERATING VOLTAGE |
3.3V / 5V |
APPLICABILITY |
Hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32 |
Interface
PIN NO. |
SYMBOL |
DESCRIPTION |
1 |
VCC |
Power positive (3.3~5V power input) |
2 |
GND |
Ground |
3 |
NC |
NC |
4 |
DIN |
Data input |
5 |
CLK |
Clock signal input |
6 |
CS |
Chip selection, low active |
7 |
D/C |
Command signal, low level for command, high level for data |
8 |
RES |
Reset signal, low active |
Hardware Configuration
MODE/INTERFACE |
BS0/BS1 |
DIN |
SCK |
3-wire SPI |
1/0 |
MOSI |
SCLK |
4-wire SPI |
0/0 |
I2C |
0/1 |
SDA |
SCL |