Pololu Medium-Power 100:1 6V Micro Metal Gearmotor

PololuSKU: POL-2367
Price:
Sale price £18.90
incl. VAT
excl. VAT
Stock:
Only 15 units left
Quantity:

Awesome Extras

PololuPololu Micro Metal Gearmotor Bracket Pair - Black
Sale price £2.90 incl. VAT excl. VAT
PololuPololu Micro Metal Gearmotor Bracket Extended Pair
Sale price £4.80 incl. VAT excl. VAT

This is a Pololu miniature medium-power (MP), 6V brushed DC motor with a 100.37:1 (100:1) metal gearbox. It has a cross-section of 10×12 mm, and the D-shaped gearbox output shaft is 9mm long and 3mm in diameter.

We stock a range of these Pololu tiny brushed DC gearmotors, available in a range of gear ratios in either high-power (HP), medium-power (MP) or low-power (LP) with precious metal brushes. In general, these kinds of motors can run at voltages above and below their nominal voltages; lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor.

With the exception of the 1000:1 gear ratio versions (not currently stocked), all of the micro metal gearmotors have the same physical dimensions, so one version can be easily swapped for another if your design requirements change.

Please see the datasheet for more information, including detailed performance graphs for each micro metal gearmotor version available from Pololu.?

Note: Stalling or overloading gearmotors can greatly decrease their lifetimes and even result in immediate damage. The recommended upper limit for instantaneous torque is 2.5 kg-cm (35 oz-in) for 380:1 and 1000:1 gearboxes, and 2 kg-cm (25 oz-in) for all the other gear ratios; we strongly advise keeping applied loads well under this limit. Stalls can also result in rapid (potentially in the order of seconds) thermal damage to the motor windings and brushes, especially for the versions that use high-power (HP and HPCB) motors; a general recommendation for brushed DC motor operation is 25% or less of the stall current.

Key Specifications

  • Voltage: 6V
  • No-load performance: 220 RPM, 70mA
  • Stall extrapolation: 0.94 kg⋅cm (13 oz⋅in), 0.67 A

Full Specifications

Gear ratio 100.37:1
No-load speed @ 6V 220 rpm
No-load current @ 6V 0.07 A
Stall current @ 6V 0.67 A
Stall torque @ 6V 0.94 kg·cm
Max output power @ 6V 0.50 W
Extended motor shaft? N
Motor type 0.67A stall @ 6V (MP 6V)
Max efficiency @ 6V 33%
Speed at max efficiency 170 rpm
Torque at max efficiency 0.19 kg·cm
Current at max efficiency 0.17 A
Output power at max efficiency 0.32 W
Size 10 × 12 × 26 mm
Weight 9.5 g
Shaft diameter 3mm

Resources

Dimensions

In terms of size, these gearmotors are very similar to Sanyo’s popular 12 mm NA4S DC gearmotors, and gearmotors with this form factor are occasionally referred to as N20 motors.

Motor Accessories

Payment & Accreditations

Payment methods
Visa Mastercard Maestro PayPal Amazon Klarna

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Accreditations