The SX1262 868M is a LoRa node expansion module designed for the Raspberry Pi Pico supporting the LoRaWAN protocol and EU868 band. The module comes complete with a lithium battery, antenna and connectors to get your project started - just add a Raspberry Pi Pico!
The module can connect to TTN and TTS servers through a LoRa gateway to use the LoRa Cloud service fast and easily with your Pico. Just slot your pico into the pre-soldered female headers to connect the two together, then use the online resources to get started.
On the board, you'll find an IPEX 1 antenna connector, which can be used with the included IPEX1 to SMA wire and 2DB 868MHz stub antenna (also included). There's also a power switch, battery connector, LED status indicators and solderable RF switch control.
The package includes the module, a 600mAh 3.7V LiPo battery, 2DB 868MHz stub antenna and an IPEX to SMA cable. We also stock a 433MHz version.
Lithium Battery Shipping: Due to courier restrictions, this product can only be shipped within England/Wales. With this item in your cart, your shipping options will be limited and may cost more than our usual rates. Why?
- Compatible with Raspberry Pi Pico
- Supports LoRaWAN protocol and EU868 band
- PH1.25 battery and recharge controller (connect rechargeable Lithium battery)
- Power switch
- 2x LED indicators for monitoring module operating status
- Battery, Antenna and antenna cable included
- Online development resources and manual
1) Raspberry Pi Pico header
2) Status indicators
- PWR: power indicator
- CHG: recharge indicator
3) RF switch control
- A: controlled by high level (default)
- B: controlled by GPIO22
4) MCP73831 recharge IC
5) SX1262 module
6) IPEX 1 antenna connector
7) Power switch
8) PH1.25 battery header
|Frequency range||EU868 (863~870MHz)|
|Module power consumption||emitting current: 118mA@22dBm|
|receiving current: 5.3mA@125KHz|
|Operating temperature||-40 ~ 85℃|
|Dimensions||21.00 × 52.00mm|
- 1x Pico LoRa SX1262 868M Module
- 1x 3.7V 600mAh LiPo battery
- 1x 2DB 868mhz Antenna
- 1x IPEX1 to SMA wire
Raspberry Pi Pico not included