Panel Mount Fingerprint Sensor with Bi-Colour LED Ring (R503)

Price:
Sale price £22.50
incl. VAT
excl. VAT
Stock:
Only 15 units left
Quantity:

Awesome Extras

Adafruit Feather 32u4 Basic Proto - The Pi HutAdafruit Feather 32u4 Basic Proto - The Pi Hut
AdafruitAdafruit Feather 32u4 Basic Proto
Sale price £19.50 incl. VAT excl. VAT
Full-Size Breadboard - White - The Pi HutFull-Size Breadboard - White - The Pi Hut
The Pi HutFull-Size Breadboard - White
Sale price £5 incl. VAT excl. VAT
The Pi Hut Jumper Bumper Pack (120pcs Dupont Wire) - The Pi HutThe Pi Hut Jumper Bumper Pack (120pcs Dupont Wire) - The Pi Hut

This is a rugged all-in-one panel-mount capacitive fingerprint sensor in a metal body with a bi-colour LED ring, making it easy to add fingerprint detection and biometrics to your project with colourful LED goodness!

Inside the sensor is a digital signal processor (DSP) chip which removes a lot of the headaches usually associated with fingerprint sensors - it handles rendering, calculations, feature finding and searching for you - all you need to do is hook it up to your microcontroller via TTL (serial) to communicate with it.

Fingerprints can be captured and stored on the sensor itself thanks to the onboard flash memory, up to around 200 fingerprints in total.

With its tough exterior and panel-mounting option, this is going to be a nice option for custom project enclosures that need a decent security/validation option. The 6-pin 1mm pitch connector can be used directly, or snip it off to wire manually. The LED ring can show multiple colours (usually red, blue and purple but stock may vary) including some effects such as fading and blinking.

Our friends over at Adafruit have written a great tutorial for using these R503 fingerprint sensors, including an Arduino library and a CircuitPython library that can enroll and search fingerprints. You can also download the datasheet for more information.

Features

  • Capacitive all-in-one fingerprint sensor
  • Rugged metal body
  • Panel mount (~23.5-24mm hole)
  • Built-in DSP
  • Onboard Flash memory
  • Onboard fingerprint storage (200 fingerprints)
  • Compatible with most microcontrollers with TTL serial connections
  • Arduino and CircuitPython libraries (Adafruit)

Specifications

  • Sensor model: R503
  • Power: 3.3V
  • Interface: UART (3.3V TTL)
  • Matching Mode: 1:1 and 1:N
  • Characteristic Value Size: 384 bytes
  • Template Size: 768 bytes
  • Image resolution: 508DPI
  • Detection area: Diameter 15mm
  • Security Level: 5 (1, 2, 3, 4, 5 - highest)
  • Starting time: <30ms
  • Working current: 20mA (fingerprint acquisition)
  • Standby current: 2uA (finger detection)
  • Baud rate: 9600
  • Image acquiring time: <0.2s
  • Thread size: M25
  • Storage capacity: ~200 fingerprints
  • Working environment: -20°C to +60°C
  • Dimensions:
    • Outside diameter: 28mm
    • Thread section diameter: 23.5mm
    • Height: 19mm
    • Thread: M25

Resources

Pinout

Pin  Colour Name  Description 
1 Red Power Supply  DC3.3V
2 Black GND Signal ground
Connected to power ground
3 Yellow TXD  Data output. TTL logical level
4 Green RXD  Data input. TTL logical level
5 Blue WAKEUP  Finger Detection Signal
6 White 3.3V Touch induction power supply
3-6 VDC

Payment & Accreditations

Payment methods
Visa Mastercard Maestro PayPal Amazon Klarna

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Accreditations