Connect this to that! If you want to bridge those contacts out onto another PCB, you'll want this GPIO Ribbon Cable! Comes in a classic Adafruit Black, has a nice soft flexible 16-line 0.05" ribbon cable and keyed IDC connectors on both ends. It's perfect for use with our GPIO Expander bonnet or with any of our RGB LED Matrices if you want to chain them together or extend the cable a little farther
This cable is 12" long and has 16 pins (2x8) in 0.1" x 0.1" spacing and two sockets crimped on either end. Pin #1 is marked with a white stripe down the side.