BMP085 Breakout [Discontinued] by DFRobot - The Pi Hut

BMP085 Breakout [Discontinued]

DFRobotSKU: SEN0120

£2.40 £8

incl. VAT

excl. VAT

This is a simple breakout board for the BMP085 high-precision, low-power barometric pressure sensor from DFRobot. The BMP085 offers a measuring range of 300 to 1100 hPa with an absolute accuracy of down to 0.03 hPa. It's based on piezo-resistive technology for EMC robustness, high accuracy and linearity as well as long term stability. This sensor supports a voltage supply between 1.8 and 3.6VDC. It is designed to be connected directly to a micro-controller via the I2C bus

This breadboard-friendly board breaks out all pins of the BMP085 to a 6-pin 0.1" pitch header. The analog and digital supplies (VDDD and VDDA) of the BMP085 are tied together and broken out to a single pin. We've also put two 4.7k pull-up resistors on the I2C lines.

Project 1: NodeMCU IoT Environment Monitor

This NodeMCU IoT project is a simple demonstration on how to send sensor data to the Internet.

Hardware Needed:

SHT1X Temperature and Humidity Sensor

BMP085 Atmospheric Pressure Sensor