Skip to content
3.52" E-Paper HAT for Raspberry Pi (360x240)
Price:
Sale price
£19.10
Stock:
Coming Soon
Coming Soon
Awesome Extras
Coming Soon
This 3.52" e-Paper HAT is a tri-colour display with no backlight, and retains the last displayed image for long periods even when powered off, making it very energy-efficient. Power is only needed during refreshes, meaning power consumption is at a minimal level. The display also has a wide 170° viewing angle for clear visibility from different areas of viewing.
It has a standard Raspberry Pi 40-pin GPIO extension header, making it compatible with Raspberry Pi series boards, Jetson Nano, and RDK X3. The SPI connection allows it to work with other controller boards like Arduino and STM32, while a built-in voltage translator provides compatibility with both 3.3V and 5V MCUs. Included online development resources and a manual, make things easy to get started!
If you're looking for the Raw display version, click here to find it in our store.
Features
- No backlight, keeps displaying last content for a long time even when powered down
- Ultra-low power consumption, basically power is only required for refreshing
- Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi / Jetson Series / RDK X3 / Arduino / STM32)
- Standard Raspberry Pi 40-pin GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3
- Compatible with Raspberry Pi 5 / 4B / 3B / 3B+
- SPI interface for connecting with controller boards like Arduino / STM32, etc.
- Voltage translator, compatible with 3.3V / 5V MCUs
Specifications
| Operating Voltage | 3.V/5V |
| Interface | 3-wire SPI, 4-wire SPI |
| Outline Dimensions | 86.50 x 57.00 (mm) |
| Display Size | 74.51 x 49.67 (mm) |
| Dot Pitch | 0.207 x 0.207 (mm) |
| Resolution | 360 x 240 pixels |
| Display Colour | Red/Black/White |
| Grey Scale | 2 |
| Full Refresh Time | 16s |
| Refresh Power | <25mW |
| Standby Current | <0.01uA (almost none) |
| Viewing Angle | >170° |
Connection Example - Raspberry Pi
Note: Raspberry Pi is NOT included
Resources
Pinout
| VCC | Power (3.3V / 5V input) |
| GND | Ground |
| DIN | SPI MOSI pin |
| CLK | SPI SCK pin |
| CS | SPI chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | External reset, low active |
| BUSY | Busy status output pin |
Package Contents
- 1x 3.52" e-Paper HAT
- 1x PH2.0 8-pin Cable
- 1x Screws Pack
Payment & Accreditations
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Accreditations
