Login / Signup
Cart
Your cart is empty
This 2.66" e-paper module has a resolution of 360 x 184 pixels, can show four colours: red, yellow, black, and white, and it also supports two levels of greyscale, providing more detailed, colourful and textured images. It has a wide viewing angle of over 170 degrees, which makes it so that content is visible from various perspectives.
It is passively reflective, which eliminates the need for a backlight and makes it easier to read in bright environments. The module is power-efficient and can display the last content shown for a long time even when the power is turned off, and has online development resources and manuals, including driver board circuit diagrams and examples for Raspberry Pi, Jetson Nano, Arduino, and STM32.
Operating Voltage | 3.3V/5V |
Interface | 3-wire SPI, 4-wire SPI |
Outline Dimensions | 85.0 x 38.5mm |
Display Size | 60.05 x 30.69mm |
Dot Pitch | 0.1668 x 0.1668mm |
Resolution | 360 x 184 pixels |
Display Colour | Red/Yellow/Black/White |
Grey Scale | 2 |
Full Refresh Time | 26s |
Refresh Power | <50mW |
Standby Current | <0.01uA (almost none) |
Viewing Angle | >170° |
VCC | Power (3.3V / 5V input) |
GND | Ground |
DIN | SPI MOSI pin |
CLK | SPI SCK pin |
CS | SPI chip selection, low active |
DC | Data/Command selection (high for data, low for command) |
RST | External reset, low active |
BUSY | Busy status output pin |
PWR | Power on/off control |