





Login / Signup
Cart
Your cart is empty
This 2.15" e-Paper HAT is a quad-colour display (Red/Yellow/Black/White) with no backlight, and retains the last displayed image for long periods even when powered off, making it very energy-efficient. Power is only needed during refreshes, meaning power consumption is at a minimal level. The display also has a wide 170° viewing angle for clear visibility from different areas of viewing.
It also has a standard Raspberry Pi 40-pin GPIO extension header, making it compatible with Raspberry Pi series boards. The SPI connection allows it to work with other controller boards like Arduino and STM32, while a built-in voltage translator provides compatibility with both 3.3V and 5V MCUs. Included are online development resources and a manual, which makes it easy to get started!
We also have a Tri-Colour version here
If you're looking for the Raw display version, click here to find it in our store.
Note: Raspberry Pi is NOT included
Operating Voltage | 3.3V/5V |
Interface | 3-wire SPI, 4-wire SPI |
Outline Dimensions | 65 x 34 (mm) |
Display size | 48.10 x 26 (mm) |
Dot Pitch | 0.1625 x 0.1625 (mm) |
Resolution | 296 x 160 pixels |
Display Colours | Red/Yellow/Black/White |
Greyscale | 2 |
Full Refresh Time | 20s |
Refresh Power | <50mW |
Standby Current | <0.01uA (almost none) |
Viewing Angle | >170° |
Raspberry Pi Zero is NOT included
VCC | Power (3.3V / 5V input) |
GND | Ground |
DIN | SPI MOSI pin |
CLK | SPI SCK pin |
CS | SPI chip selection, low active |
DC | Data/Command selection (high for data, low for command) |
RST | External reset, low active |
BUSY | Busy status output pin |