This 1.69" LCD IPS module is a great way to add a small display to your project.
The display has a 240x280 resolution, and offers 262K RGB colours, to give a clear and vibrant display. The module is controlled via a simple 4-wire SPI interface thanks to the embedded ST7789V2 driver.
The handy mounting holes make it easy to incorporate into a custom panel or 3D printed enclosure, and the online development resources make it easy to get up and running on a Raspberry Pi, Arduino board, and an STM32.
A GH1.25 20cm 8-pin cable is included, ready to connect to your favourite microcontroller.
Connection Example: 1.69inch LCD Display Module connected to the Raspberry Pi
- 240×280 resolution, 262K colours, clear and colourful displaying effect
- SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32
- Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)
|Operating Voltage||3.3V / 5V|
|Communication Interface||4-wire SPI|
|Resolution||240 × 280 pixels|
|Display Size||27.97 × 32.63mm|
|Pixel Size||0.11655 × 0.11655mm|
|Module Size||31.50 × 39.00mm|
|VCC||Power (3.3V / 5V input)|
|DIN||SPI data input|
|CLK||SPI clock input|
|CS||Chip selection, low active|
|DC||Data/Command selection (high for data, low for command)|
|RST||Reset, low active|
- 1x 1.69" LCD Module
- 1x GH1.25 20cm 8-pin cable