Argon NEO 5 M.2 NVME Case for Raspberry Pi 5

This case offers the same great features and style as the standard NEO 5 but with the addition of M.2 NVME support (drive not included) allowing you to add lots of fast storage to your Raspberry Pi 5 via the PCI-E header!

The lower section of the case accepts any M.2 NVME with M-Key up to 2280 size (not included), and even has an included aluminium heatsink to keep your drive cool.

Just like the standard NEO 5, the case has a smooth aluminium alloy main body with both active and passive cooling for the ultimate cooling/quiet combo.  The case also gives access to all ports including the power button.

With a 30mm internal PWM blower fan, combined with intake and exhaust vents, you can push your Pi 5 to the max and let the case handle cooling when it's needed. When you're not pushing things to the limits, the fan will turn off and allow the passive cooling features to take over, keeping your environment quiet.

Note: You will need to use an official 27W Raspberry Pi power supply with this case to ensure sufficient power for the Pi, case and NVMe drive.

NVME Compatability

Some customers have reported compatibility issues with certain brands/models of NVME drives. Whilst no 'official' compatibility list is maintained by Argon40 (yet), we have made them aware and discussions on their own forum are highlighting the need for clarification.

For now, we suggest following the same compatibility list on the Pimoroni NVME Base page as a starting point until something official is shared from Argon40. Please also read our troubleshooting guide.

Features

• Designed specifically for Raspberry Pi 5 by Argon Forty
• M.2 NVME support - compatible with any M.2 NVME with M-Key up to 2280 size
• Boot your Raspberry Pi 5 from an NVME M.2 Drive (drive not included)
• Built-in heatsink for your M.2 NVME Drive
• Enjoy faster storage by connecting M.2 NVME drives via the PCIe slot on the Raspberry Pi 5
• Greater thermal management for the M.2 NVME drive with the included aluminium heatsink
• Reliable and consistent data transfer with included FPC impedance-controlled cable
• Made with aluminium alloy and a polished black finish
• The metal case acts as passive cooling for the high demands of the Raspberry Pi 5
• Assembling the case with the Raspberry Pi is easy
• Easy to bring anywhere with the case's small form factor
• Screw on top cover to keep the ports safe when not in use
• All the ports of the Raspberry Pi 5 are available while keeping the Pi safe
• 30mm internal PWM blower fan
• Passive cooling fins and exhaust vents
• Side air intake vents

Resources

• Instruction manual
  
• Troubleshooting guide
• Argon40 Forum

Package Contents

• 1x Argon NEO 5 case
• 1x M.2 NVME PCIE Board
• 1x Screw pack
• Thermal compund
• Instruction manual

Raspberry Pi not included