Cart 0

Superfast Shippingfrom just £2.99

No Quibblereturns policy

Next Day Deliveryorder by 2PM*

UPS PIco - JST-XHP-2 Battery Connector (2 Wire)

UPS PIco - JST-XHP-2 Battery Connector (2 Wire)
In Stock
£ 1.20

The UPS PIco features a female XHP-2 connector on board for LiPo battery connections. These JST-XHP-2 cable assembles will allow you to connect 3rd party LiPo's to our UPS PIco

They're 70mm long, feature a 22AWG core on each wire, so plenty thick for most battery loads (max. 8A), and terminate in a male JST XHP-2 on both ends. 

We do not offer warranty on PIco's broken due to the use of a 3rd party batteries disregarding the notes below

Important Notes when using 3rd Party LiPo's with the UPS PIco

  • Check the positive & negative terminals of the LiPo are correct - They are not all the same!
  • LiPo Charging Voltage must be 4.2 V
  • C factor should allow battery to provide more than 6A 
    • e.g. 450mA x 15 (C factor) = 6.75A or 3000 mAh x 2 (C factor) = 6A
  • Larger batteries must have PCM protection installed on battery

Features

  • 2 Pin JST-XHP-2 Assembly (Red/Black)
  • Current rating: 8A AC, DC (AWG #22)
  • Voltage rating: 100V AC, DC
  • 70mm Long
  • Temperature range: -25?C to +85?C (including temperature rise in applying electrical current)
  • Contact resistance: Initial value/10m ? max. After environmental testing/20m ? max.
  • Insulation resistance: 1,000M ? min.
  • Withstanding voltage: 800V AC/minute

Downloads

Datasheet