{"product_id":"suptronics-x1207-poe-powered-ups-hat","title":"SupTronics X1207 PoE UPS HAT for Raspberry Pi 5","description":"\u003cp\u003eThe \u003ca href=\"\/collections\/suptronics\" title=\"SupTronics Products\"\u003eSupTronics\u003c\/a\u003e X1207 is a \u003cstrong\u003ePoE UPS\u003c\/strong\u003e HAT designed for \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e, delivering reliable 5.1V\/5A backup power to maintain uninterrupted operation.\u003c\/p\u003e\n\u003cp\u003eIt supports high-demand setups and complies with IEEE 802.3af\/at PoE standards, drawing up to \u003cstrong\u003e25W\u003c\/strong\u003e from a compatible POE switch while providing both power and network connectivity over a single cable.\u003c\/p\u003e\n\u003cp\u003eWith intelligent power management, it \u003cstrong\u003emonitors Pi status\u003c\/strong\u003e, \u003cstrong\u003ecuts power\u003c\/strong\u003e after shutdown to conserve the 21700 battery (battery not included), and features \u003cstrong\u003eultra-low standby consumption\u003c\/strong\u003e. The board ensures seamless power switching during outages and \u003cstrong\u003esupports auto power\u003c\/strong\u003e-on and AC loss detection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and 21700 battery not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry Pi 5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPS Output:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt for continuous, long-lasting operation -providing unwavering power for always-on Raspberry Pi systems\u003c\/li\u003e\n\u003cli\u003eSupports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi applications\u003c\/li\u003e\n\u003cli\u003eIntegrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss\u003c\/li\u003e\n\u003cli\u003ePower the Pi directly through the 40-pin header, eliminating the need for cables and soldering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Charging:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSupports battery charging with a capacity of 1500mA\u003c\/li\u003e\n\u003cli\u003eBattery charging control can be managed via GPIO\u003c\/li\u003e\n\u003cli\u003eProvides protection against battery overcurrent and overvoltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in protection against reverse connection of battery cells\u003c\/li\u003e\n\u003cli\u003eIntegrated Maxim's fuel-gauge systems for reading battery voltage and percentage over i2c\u003c\/li\u003e\n\u003cli\u003eOn-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100%\u003c\/li\u003e\n\u003cli\u003eFeatures a single \u003cstrong\u003e21700 battery holder\u003c\/strong\u003e, supporting battery of up to 5000mAh (\u003cstrong\u003ebattery not included\u003c\/strong\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSupports Power over Ethernet (PoE) input capability\u003c\/li\u003e\n\u003cli\u003eProvides up to 5A output current, enabling 1.5A charging while powering the system\u003c\/li\u003e\n\u003cli\u003eStandard Compliance: IEEE 802.3af \u0026amp; 802.3at (PoE+)\u003c\/li\u003e\n\u003cli\u003eFully isolated switched-mode power supply (SMPS) topology\u003c\/li\u003e\n\u003cli\u003eSimplified single-cable installation and robust power delivery for Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi USB-C Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Power Management:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSeamless power switching between backup power and power adapter\u003c\/li\u003e\n\u003cli\u003eOn-board push button performs the same actions as the Pi's power button\u003c\/li\u003e\n\u003cli\u003eAutomatically cuts off power when the Pi is shut down\u003c\/li\u003e\n\u003cli\u003eOn-board LED indicates power status and Pi detection\u003c\/li\u003e\n\u003cli\u003eAC power loss and power adapter failure detection via GPIO\u003c\/li\u003e\n\u003cli\u003eAuto power-on when power is applied or restored\u003c\/li\u003e\n\u003cli\u003eAutomatic safe shutdown when battery voltage is low (programmable)\u003c\/li\u003e\n\u003cli\u003eUltra-low standby power consumption to maximize battery life\u003c\/li\u003e\n\u003cli\u003eAdvanced system power-path management to minimize frequent charging and discharging of batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Accessories\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/suptronics-x1002-bottom-mount-nvme-add-on-for-raspberry-pi-5\" title=\"SupTronics X1002 Bottom-Mount NVMe Add-on for Raspberry Pi 5\"\u003eX1002 single NVMe shield for Pi5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/suptronics-x1005-bottom-mount-dual-nvme-add-on-for-raspberry-pi-5\" title=\"SupTronics X1005 Bottom-Mount Dual-NVMe Add-on for Raspberry Pi 5\"\u003eX1005 dual NVMe shield for Pi5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/suptronics-x1006-sata-nvme-expansion-for-raspberry-pi-5\" title='SupTronics X1006 2.5\" SATA + M.2 SATA Expansion for Raspberry Pi 5'\u003eX1006 PCIe to SATA 2.5 HDD+M.2 SSD shield for Pi 5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/suptronics-x1007-dual-sata-expansion-for-raspberry-pi-5\" title=\"SupTronics X1007 Dual SATA Expansion for Raspberry Pi 5\"\u003eX1007 PCIe to dual SATA 2.5 HDD\/SSD shield for Pi 5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/suptronics-x1100-usb-to-sata-2-5-add-on-for-raspberry-pi-5\" title='SupTronics X1100 USB to SATA 2.5\" Add-on for Raspberry Pi 5'\u003eX1100 USB3 to SATA 2.5 HDD\/SSD shield for Pi 5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eOther add-on boards are attached to the bottom of the Raspberry Pi\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e: 35-57VDC powering over Ethernet\u003cbr\u003e: 5Vdc 5A via USB-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUPS output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e: 5.1V ±5% Max 5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery charging current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e: 1.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTerminal Battery Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e: 4.23V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery Recharge Threshold\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e: 4.1V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePorts \u0026amp; Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e: 4-pin POE female header x1\u003cbr\u003e: USB-C power in connector x1\u003cbr\u003e: 1-cell 21700 battery connector x1\u003cbr\u003e: 40-pin extended GPIO header x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCB Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e: 86.5mm x 84.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eSafety Instructions and Warnings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe default charging current is set to 1.5A and charge cut-off voltage is 4.23V. before installing your battery in the UPS board, Please carefully confirm the maximum charging current and voltage, exceeding the upper limit of the charging specification that the battery can withstand will not only cause adverse reactions, but may also cause irreversible damage.\u003c\/li\u003e\n\u003cli\u003eIt is essential to read and understand these safety instructions and warnings before charging your batteries.\u003c\/li\u003e\n\u003cli\u003eLithium Polymer and Li-ion batteries are volatile. Failure to read and follow the instructions below may result in fire, personal injury, and damage to property if charged or used improperly.\u003c\/li\u003e\n\u003cli\u003eNever make a wrong polarity connection when charging or discharging battery packs. Always double-check the polarity of the battery's connector to ensure that \"+\" is connected to \"+\" and \"-\" is connected to \"-\".\u003c\/li\u003e\n\u003cli\u003eDo not mix and use old batteries with new batteries, or batteries with different brand names.\u003c\/li\u003e\n\u003cli\u003eLithium batteries have a limited cycle life. Please replace old batteries with new ones when they reach their service life or when they are two years old, whichever comes first.\u003c\/li\u003e\n\u003cli\u003eWhen charging the Battery Pack, please place the battery in a fireproof container. Do not leave the UPS shield on wood material or carpet unattended.\u003c\/li\u003e\n\u003cli\u003eKeep the UPS shield away from children to ensure their safety.\u003c\/li\u003e\n\u003cli\u003eDo not apply power to your Raspberry Pi via the Type-C USB socket.\u003c\/li\u003e\n\u003cli\u003eCompatible with unprotected 21700 battery only (Max. length: 70.3 mm).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Power_mgmt\/x120x-v1.0_software.html\" rel=\"noopener\" title=\"Software setup\/tutorials\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Power_mgmt\/x1207-v1.2_hardware.html\" rel=\"noopener\" title=\"Hardware information and assembly\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x X1207 V1.2 UPS board\u003c\/li\u003e\n\u003cli\u003e4x Spacer M2.5 F\/F 13.5mm\u003c\/li\u003e\n\u003cli\u003e8x Screw M2.5x5mm\u003c\/li\u003e\n\u003cli\u003e1x Pogo pin x1 (For connecting to the Pi 5 PSW through hole)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and 21700 battery not included. \u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":55526411370881,"sku":"X1207","price":45.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1207-poe-powered-ups-hat-suptronics-x1207-1232367907.jpg?v=1776178329","url":"https:\/\/thepihut.com\/products\/suptronics-x1207-poe-powered-ups-hat","provider":"The Pi Hut","version":"1.0","type":"link"}