Cart 0

Superfast Shippingfrom just £2.99

No Quibblereturns policy

Next Day Deliveryorder by 2PM*

Raspberry Pi Compute Module I/O Dev Board

Raspberry Pi Compute Module I/O Dev Board
Only 6 left!
£ 90.00

The Compute Module 3 I/O Development Board (CMIO V3) is suitable for the development of Compute Module 3 or Compute Module 3 Lite. The IO Board features an SD card socket to support the Compute Module Lite 3 variant and breaks out the compute modules I/O's to various ports and 120 x standard pitch 0.1" headers.

To start the development, plug the Compute Module 3 or Compute Module 3 Lite into the IO Board, and power the development board using a micro USB 5V 2.5A Raspberry Pi Power Supply. The development board contains all of the necessary interface ports to allow an engineer to design and test their own prototype application. The modules simplify the design process engineers need to undertake when developing a System on Module (SoM) solution into their final product. Engineers do not need to concern themselves with the complexities of interfacing with the BCM2837 processer directly and instead can concentrate on designing the interfaces to their own IO board and their application software . This simplicity fosters rapid development.

Please Note, this is the IO Board only, compute module is not included.

The Raspberry Pi Compute Module I/O Dev Board Features the Following Interfaces:

  • Multiple GPIO interfaces on 2 x 60 way 0.1" Headers
  • 1 x Micro USB connector type B - USB Slave
  • 1 x USB connector type A - USB Host
  • 2 x CSI ports for camera boards
  • 2 x DSI ports for display boards
  • Full size HDMI port
  • Micro USB power connector
  • Micro SD connector
  • Software - ARMv7 Instruction Set, and a mature and stable Linux software stack


Compute Module Datasheet

Schematics & Interface Information