Long Flex sensor

Price:
Sale price £13.40
incl. VAT
excl. VAT
Stock:
In stock
Quantity:

This sensor can detect flexing or bending in one direction. They were popularized by being used in the Nintendo PowerGlove as a gaming interface.

These sensors are easy to use, they are basically resistors that change value based on how much they're flexed. If they're unflexed, the resistance is about ~10KΩ. When flexed all the way the resistance rises to ~20KΩ. They're pretty similar to FSRs so following this tutorial will get you started. You can use an analog input on a microcontroller (with a pullup resistor) or a digital input with the use of a 0.1uF capacitor for RC timing.

The bottom part of the sensor (where the pins are crimped on) is very delicate so make sure to have strain relief - such as clamping or gluing that part so as not to rip out the contacts!

Technical Details

Dimensions:

  • Length: 112.5mm/4.4in
  • Width: 6.38mm/0.25in
  • Thickness: 0.5mm/0.2in
  • Weight: 0.5g/0.017g

Downloads:

Datasheet from SpectraSymbol

Payment & Accreditations

Payment methods
Visa Mastercard Maestro PayPal Amazon Klarna

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Accreditations