Gravity: Analog High Temperature Sensor

DFRobotSKU: SEN0198
Price:
Sale price £13.30
incl. VAT
excl. VAT
Stock:
Sold out
Notify me
What sensor should you use when you need to measure temperature? Most people will think of a DS18B20 temperature sensor first, but this sensor is only capable of measuring temperatures up to 125C. In order to measure temperatures greater than 100C you will need something with a greater temperature range and resistance. This is the sensor you need! We have used a PT100 resistance type high temperature probe which is often used in industrial applications. Using this probe you can measure a temperature range between 30-350C. The module itself is compatible 3.3V-5.5V supply, so Arduino, STM32 and other microcontrollers are compatible.

CMOSens technology makes it of advantages such as low power consumption, fast response, strong anti-jamming capacity etc.

Application:

Medical equipment

HVAC

Meteorology

Humidity regulator Dehumidifier

Tests and measurements

Automobile

Automatically control

This sensor includes a resistive element and a sense of wet NTC temperature measuring devices. It has excellent quality, fast response, anti-interference ability and high cost performance advantages. Its signal transmission distance up to 20 meters. These features make it a variety of applications and even the most demanding applications.

Application:
Medical equipment HVAC
Meteorology
Humidity regulator
Dehumidifier Tests and measurements
Automobile
Automatically control

It contains a resistive element and a sense of wet NTC temperature module. Compared to DHT11, it has smaller humidity deviation, faster response, stronger anti-interference ability and higher cost performance

Application:

Medical equipment HVAC

Meteorology Humidity regulator Dehumidifier

Tests and measurements
Automobile Automatically control


SENSOR de temperatura ( PT100) con ARDUINO ||DF ROBOT (Spanish)

Features

  • Supports 3-Pin "Gravity"
  • interfaceAnalog output

Specification

1.Module
  • Operating voltage: 3.3V-5.5V
  • Analog output voltage: 0.2V-2.8V
  • Working temperature range: 30-350C
  • Relative Error: ±2% F.S.
  • Interface: PH2.0-3P
  • Size: 42 * 32 * 18 mm/ 1.65 * 1.26 * 0.7 inches
  • Waterproof: No
2.PT100 Probe
  • Probe Working temperature: -20-400C
  • Sheathing Tolerance: up to 200
  • Length: 2m
  • Precision: 0.5C
  • Waterproof: Yes

Documents

Shipping List

  • Analog High Temperature Sensor Module x1
  • PT100 Probe x1
  • Analog Sensor Cable x1

Projects

Project 1. Build KnowFlow: automatic water monitor

KnowFlow is the name of this water quality monitoring device, based on Arduino Uno. It can automatically monitor 5 parameters of water: pH, Temperature, Dissolved Oxygen, Electronic Conductivity, ORP.

  • Central Control Unit: Arduino Uno (DFRobot Bluno in this case) and Expansion Shield (DFRobot Expansion Shield V7.1 in this case)
  • Water Sensors: pH (pH probe and pH circuit board); EC (EC probe and EC circuit board); ORP (ORP probe and ORP circuit board); Temperature (temperature probe and temperature circuit board); Dissolved Oxygen (DO probe, BNC and circuit board); real time clock circuit board
  • Data Storage: Micro-SD module, Micro SD card
  • Fit and fix: mounting plate, water proof box( 200mm_150mm_75mm), water proof joint
  • Other parts: Cables (Wires), bread board, bolts and nuts, screws, battery, double-sided adhesive, write on tape, small wrench, spiral cable wrap

Payment & Accreditations

Payment methods
Amazon American Express Maestro Mastercard PayPal Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Accreditations