RGB LED Module (Unassembled Kit)

DFRobotSKU: DFR0124
Price:
Sale price £27.90
incl. VAT
excl. VAT
Stock:
Sold out
Notify me

This Arduino-compatible module uses three TI TLC5940 PWM LED chips to drive a 4x4 array of RGB LEDs. Each color is controlled by a different chip so you can adjust the reference resistors for the appropriate current. The TLC5940 chips are not directly connected to any Arduino pins, but a header is provided for you to make a manual connection depending on the needs of your sketch.

Up to 16 of these modules can be serially connected to make a fantastic LED wall or a LED circle.

It can be directly connected with Arduino via F/M cables. If you want ,you can also connect it to Interface shield through an IDC2x5 cables,and then plug the Interface shield to Arduino.

NOTE: This is a Un-assembled Kit, you need soldering skill to assemble it. A tutorial is available as a reference.

If you feel the assignment of the leds is not good enough, you could assign the LEDs in a custom pattern by wiring to the LED driving holes.

Specification

  • Supply Power:DC 5v
  • RGB LED: common anode
  • IDC2x5 Serial Data Interface
  • 4x4 array of RGB LEDs
  • TLC5940 LED driver
  • 16 Channels RGB LED with PWM control
  • Size:78x45x12mm (3x1.8x0.5'')
  • Interface:
    • D13(SCK) TLC5940 SCLK
    • D10(SS) TLC5940 BLANK
    • D11(MOSI) TLC5940 SIN
    • D9 TLC5940 XLAT
    • D3 TLC5940 GSCLK

Documents

Shipping List

  • RGB Module PCB board x1
  • RGB LEDs x16
  • IDC10 Interface x1
  • TLC5940NT chips x3
  • DIP28 socket x3
  • Jumper cap x1
  • 20pin row needles x1

Payment & Accreditations

Payment methods
Amazon American Express Maestro Mastercard PayPal Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Accreditations