{"title":"Resistors","description":"","products":[{"product_id":"square-force-sensitive-resistor-fsr","title":"Square Force-Sensitive Resistor (FSR) - Solder Tabs","description":"\u003cp\u003eFSRs are sensors that allow you to detect physical pressure, squeezing and weight. They are simple to use and low cost. This sensor is an \u003cstrong\u003eInterlink 30-73258 Model 406 FSR\u003c\/strong\u003e with a 38mm square sensing region. Note that this sensor can't detect \u003cem\u003ewhere\u003c\/em\u003e on the square you pressed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis version has connection tabs, not female sockets\/contacts. If soldering, do it very fast because if your iron is not good quality, or you take even a few seconds, you will melt the plastic and ruin the FSR!\u003c\/strong\u003e \u003ca title=\"Square Force-Sensitive Resistor (FSR) - Female Tin Contacts\" href=\"\/products\/square-force-sensitive-resistor-fsr-female-tin-contacts\"\u003eA version fitted with female tin contacts is also available.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eFSRs are basically a resistor that changes its resistive value (in ohms Ω) depending on how much it's pressed. These sensors are fairly low cost, and easy to use, but they're rarely accurate. They also vary some from sensor to sensor, perhaps 10%. So basically when you use FSRs you should only expect to get ranges of response. While FSRs can detect weight, they're a bad choice for detecting exactly how many pounds of weight are on them.\u003cbr\u003e\u003cbr\u003eFSRs are made of plastic and the connection tab is crimped on delicate material. The best way to connect to these is to simply plug them into a breadboard or use a clamp-style connector like alligator clips, female header, or a terminal block. It is possible to solder onto the tabs, but you must be very fast because if your iron is not good quality, or you dally even a few seconds, you will melt the plastic and ruin the FSR!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDon't attempt to solder directly to your FSR unless you are absolutely sure you have the skills to do so.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eFor a full tutorial with wiring diagrams, code examples and project ideas, check out \u003ca href=\"https:\/\/learn.adafruit.com\/force-sensitive-resistor-fsr\"\u003eAdafruit's FSR tutorial page\u003c\/a\u003e!\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 88mm\u003c\/li\u003e\n\u003cli\u003eWidth: 43.7mm\u003c\/li\u003e\n\u003cli\u003eThickness: 0.42mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.12g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"FSR 400 Series Datasheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/FSR400Series_PD.pdf?v=1764347668\" target=\"_blank\"\u003eFSR datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Square Force-Sensitive Resistor (FSR) - Solder Tabs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739199889,"sku":"105737","price":6.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/square-force-sensitive-resistor-fsr-interlink-406-the-pi-hut-ada1075-28609946484931.jpg?v=1646145198"},{"product_id":"round-force-sensitive-resistor-fsr","title":"Round Force-Sensitive Resistor (FSR)","description":"\u003cp\u003e\u003cstrong\u003eThe Alpha FSR 0.5\" Force Sensitive Resistor detects pressure and touch with a simple, low-cost design, ideal for sensing relative force changes rather than precise weight measurements.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eFSRs are sensors that allow you to detect physical pressure, squeezing and weight. They are simple to use and low cost. This sensor is an \u003cstrong\u003eAlpha MF01A-N-221-A01\u003c\/strong\u003e with \u003cstrong\u003e1\/2 diameter sensing region\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eWe used to stock the Interlink model 402 FSR - the Alpha version is almost half the price but the same quality and size!\u003c\/p\u003e\n\u003cp\u003eFSR's are basically a resistor that changes its resistive value (\u003cstrong\u003ein ohms Ω\u003c\/strong\u003e) depending on how much its pressed. These sensors are fairly low cost, and easy to use but they're rarely accurate. They also vary some from sensor to sensor perhaps 10%. So basically when you use FSR's you should only expect to get ranges of response. While FSRs can detect weight, they're a bad choice for detecting exactly how many pounds of weight are on them.\u003c\/p\u003e\n\u003cp\u003eWe also have a version that has 10x as much force range, for when you are dealing with stronger pressures. If you are looking for more force range check out the \u003ca title=\"Round High Force Sensitive Resistor (FSR) - 1 ~ 100 Newton Force - Alpha MF01A-N-221-A05\" href=\"\/products\/round-high-force-sensitive-resistor-fsr-1-100-newton-force-alpha-mf01a-n-221-a05\"\u003eRound High Force Sensitive Resistor (FSR) - 1\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFSRs are made of plastic and the connection tab is crimped on delicate material. The best way to connect to these is to simply plug them into a \u003ca title=\"Solderless Breadboards\" href=\"\/collections\/solderless-breadboards\"\u003ebreadboard\u003c\/a\u003e or use a clamp-style connector like \u003ca title=\"Crocodile Clips\" href=\"\/collections\/crocodile-clips\"\u003ealligator clips\u003c\/a\u003e, female header, or a \u003ca title=\"Terminal Blocks\" href=\"\/collections\/terminal-blocks\"\u003eterminal block\u003c\/a\u003e. It is possible to solder onto the tabs but you must be very fast because if your iron is not good quality or you dally even a few seconds, you will melt the plastic and ruin the FSR! \u003cstrong\u003eDon't attempt to solder directly to your FSR unless you are absolutely sure you have the skills to do so.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: Breadboard not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDetects physical pressure, squeezing, and weight\u003c\/li\u003e\n\u003cli\u003eAlpha MF01A-N-221-A01 model with 1\/2\" diameter sensing region\u003c\/li\u003e\n\u003cli\u003e50% lower cost than previous Interlink 402 FSR model\u003c\/li\u003e\n\u003cli\u003eResistive value changes based on applied pressure (measured in ohms)\u003c\/li\u003e\n\u003cli\u003eLow cost and easy to use\u003c\/li\u003e\n\u003cli\u003eProvides pressure ranges rather than exact measurements\u003c\/li\u003e\n\u003cli\u003eTypical sensor variation of approximately 10%\u003c\/li\u003e\n\u003cli\u003eNot recommended for precise weight detection\u003c\/li\u003e\n\u003cli\u003e10x force range version available for high-pressure applications\u003c\/li\u003e\n\u003cli\u003eConnect via breadboard, alligator clips, female headers, or terminal blocks\u003c\/li\u003e\n\u003cli\u003eSoldering not recommended due to risk of melting plastic components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eLength:: 60.4mm\u003c\/li\u003e\n\u003cli\u003eWidth: 18.33mm\u003c\/li\u003e\n\u003cli\u003eThickness: 0.56mm\u003c\/li\u003e\n\u003cli\u003eWeight: 0.9g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecs\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eForce sensitivity range: 30g～1000g (0.3N～10N)\u003c\/li\u003e\n\u003cli\u003eForce Resolution: Continuous (Analog)\u003c\/li\u003e\n\u003cli\u003eStand-off \/ Open unloaded resistance: \u0026gt;20MΩ\u003c\/li\u003e\n\u003cli\u003eForce repeatability (single part) 2%\u003c\/li\u003e\n\u003cli\u003eForce repeatability (part to part) 10% within a single batch\u003c\/li\u003e\n\u003cli\u003eResponse time: \u0026lt;1ms\u003c\/li\u003e\n\u003cli\u003eLife cycle (without failure): \u0026gt; 5 Million\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -30°C to +85°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Product datasheet\" href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/166\/166_MF01A-A01.pdf\" target=\"_blank\"\u003eProduct datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Tutorial\" href=\"https:\/\/learn.adafruit.com\/force-sensitive-resistor-fsr\" target=\"_blank\"\u003eTutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Round Force-Sensitive Resistor (FSR)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBreadboard not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739534353,"sku":"ADA166","price":3.8,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/round-force-sensitive-resistor-fsr-adafruit-ada166-1234108339.jpg?v=1776963793"},{"product_id":"linear-softpot-ribbon-sensor","title":"Linear SoftPot (Ribbon Sensor) (100mm)","description":"\u003cp\u003e\u003cstrong\u003eThe Spectra Symbol SoftPot ribbon controller is a thin, adhesive-backed linear potentiometer that outputs a variable analogue voltage based on touch position, ideal for compact and responsive user input.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eManufactured by Spectra Symbol, these are nice little ribbon controllers (also known as 'soft \u003ca href=\"\/collections\/rotation-sensors\" title=\"Rotation and Slide Sensors\"\u003epotentiometers\u003c\/a\u003e') with an adhesive backing.\u003c\/p\u003e\n\u003cp\u003eThere is a nominal \u003cstrong\u003e10K resistance\u003c\/strong\u003e across the two outer leads. The middle pin resistance with respect to either of the outer pins changes depending on where on the strip one presses. When no pressure is applied, the middle pin floats, so be sure to use some sort of weak pullup, such as \u003cstrong\u003e100K ohm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eTo use Connect one side pin to ground via a 10K \u003ca href=\"\/collections\/resistors\" title=\"Resistors\"\u003eresistor\u003c\/a\u003e in series. Connect the other side pin to your Vcc power line (\u003cstrong\u003e3V, 5V\u003c\/strong\u003e etc) via a different 10K resistor in series. Then read the analogue voltage on the centre pin. It will range from\u003cstrong\u003e 1\/3 Vcc to 2\/3 Vcc \u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: Do not connect to Ground and Power directly! Breadboard not included. \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRibbon controller (soft potentiometer) with adhesive backing by Spectra Symbol\u003c\/li\u003e\n\u003cli\u003e10K nominal resistance across outer leads\u003c\/li\u003e\n\u003cli\u003eMiddle pin resistance varies based on pressure point applied\u003c\/li\u003e\n\u003cli\u003eRequires 100K ohm weak pullup resistor when no pressure applied\u003c\/li\u003e\n\u003cli\u003eConnect outer pins to ground and Vcc through 10K series resistors\u003c\/li\u003e\n\u003cli\u003eRead analogue voltage on centre pin (ranges 1\/3 Vcc to 2\/3 Vcc)\u003c\/li\u003e\n\u003cli\u003eCompatible with 3V and 5V systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 140.6mm\u003c\/li\u003e\n\u003cli\u003eWidth: 20.50mm\u003c\/li\u003e\n\u003cli\u003eThickness: 0.58mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.68g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/178\/SOFTPOT-DATA-SHEET-Rev-F3.pdf\" title=\"Product Datasheet\" rel=\"noopener\" target=\"_blank\"\u003eProduct Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Linear SoftPot (Ribbon Sensor) (100mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBreadboard not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27739616209,"sku":"ADA178","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/linear-softpot-ribbon-sensor-100mm-adafruit-ada178-1233347580.jpg?v=1776768972"},{"product_id":"panel-mount-1k-potentiometer-breadboard-friendly","title":"Panel Mount 1K potentiometer (Breadboard Friendly) (1K Linear)","description":"\u003cp\u003eThis \u003cb\u003e1K\u003c\/b\u003e potentiometer is a two-in-one, good in a breadboard or with a panel. Its a fairly standard linear taper 1K ohm potentiometer, with a grippy shaft. Its smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2\" apart with pin-points, so you can plug it into a breadboard or perfboard. Once you're done prototyping, you can drill a hole into your project box and mount the potentiometer that way.\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\u003ch5\u003eTechnical details\u003c\/h5\u003e\n      \u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n        \n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\u003cul\u003e\n\u003cli\u003e1K ohm potentiometer, linear taper\u003c\/li\u003e\n\u003cli\u003e100,000 Cycle Life\u003c\/li\u003e\n\u003cli\u003ePower: 0.2W\u003c\/li\u003e\n\u003cli\u003eRotational travel: 300 °\u003c\/li\u003e\n\u003cli\u003eStatic Stop Strength: 90 oz-in\u003c\/li\u003e\n\u003cli\u003eRotational Torque: 0.5 to 1.25 oz-in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\nDimensions:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBody: 16mm\u003c\/li\u003e\n\u003cli\u003eHeight: 24mm\u003c\/li\u003e\n\u003cli\u003eWeight: 6g\u003c\/li\u003e\n\u003c\/ul\u003e \u003cul id=\"product-files\"\u003e\n\u003c\/ul\u003e\n\n      \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739618577,"sku":"103558","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/panel-mount-1k-potentiometer-breadboard-friendly-1k-linear-the-pi-hut-103558-13719563829310.jpg?v=1646370550"},{"product_id":"panel-mount-100k-potentiometer-breadboard-friendly","title":"Panel Mount 100K potentiometer (Breadboard Friendly) (100KB)","description":"\u003cp\u003eThis potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 100K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2\" apart with pin-points, so you can plug it into a breadboard or perfboard. Once you're done prototyping, you can drill a hole into your project box and mount the potentiometer that way.\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/p\u003e\u003ch5\u003eTechnical details\u003c\/h5\u003e\n      \u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n        \n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBody: 16mm \/ 0.6\"\u003c\/li\u003e\n\u003cli\u003eBody Circumference: 50mm \/ 2\"\u003c\/li\u003e\n\u003cli\u003eShaft Length: 15mm \/ 0.6\"\u003c\/li\u003e\n\u003cli\u003eWeight: 6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100K ohm potentiometer, linear taper\u003c\/li\u003e\n\u003cli\u003e100,000 Cycle Life\u003c\/li\u003e\n\u003cli\u003eRotational travel: 300 °\u003c\/li\u003e\n\u003cli\u003eStatic Stop Strength: 90 oz-in\u003c\/li\u003e\n\u003cli\u003eRotational Torque: 0.5 to 1.25 oz-in\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/p160.pdf\"\u003eP160KN-0QC15B100K Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e \u003cul id=\"product-files\"\u003e\n\u003c\/ul\u003e\n\n      \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27739635601,"sku":"103726","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/panel-mount-100k-potentiometer-breadboard-friendly-100kb-the-pi-hut-103726-13717209710654.jpg?v=1646370019"},{"product_id":"through-hole-resistors-220-ohm-5-1-4w-pack-of-25","title":"Through-Hole Resistors - 220 ohm 5% 1\/4W - Pack of 25","description":"\u003cp\u003eΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!\u003c\/p\u003e \u003cp\u003eThis is a \u003cstrong\u003e25 Pack of 220Ω Resistors. \u003c\/strong\u003eMore specifically, they are \u003cstrong\u003ecarbon film\u003c\/strong\u003e, through-hole \u003cstrong\u003eaxial\u003c\/strong\u003e type, with \u003cstrong\u003e1\/4 Watt\u003c\/strong\u003e max dissipation, \u003cstrong\u003e300V\u003c\/strong\u003e max voltage, \u003cstrong\u003e5%\u003c\/strong\u003e precision resistors. Whew! These are super common and great for use in any kit, breadboard, perf-board, or other project. We got ones with 0.4mm thick wires so they plug in nicely into solder-less breadboards.\u003c\/p\u003e \u003cp\u003eWe have a slew of different resistor packs with different ohms of resistance; \u003ca href=\"https:\/\/thepihut.com\/collections\/adafruit-components-parts\/Resistors\"\u003echeck them all out here\u003c\/a\u003e!\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003ch5\u003eTechnical details\u003c\/h5\u003e\n      \u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n        \n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/adafruit.com\/images\/product-files\/2780\/Resistor_Data_Sheet.pdf\"\u003eResistor Datasheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv style=\"display: inline;\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/RoHS2_2011_65_EU.svg?5383\" style=\"max-width: 146px; display: inline-block; margin-right: 20px;\"\u003e\n      \u003c\/div\u003e\n\u003cdiv style=\"display: inline;\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/RoHS2_2015_863_EU.svg?5383\" style=\"max-width: 146px; display: inline-block;\"\u003e\n      \u003c\/div\u003e\n\u003c\/div\u003e \u003cul id=\"product-files\"\u003e\n\u003c\/ul\u003e\n\n      \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740108561,"sku":"103195","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/through-hole-resistors-220-ohm-5-1-4w-pack-of-25-the-pi-hut-103195-13720014553150.jpg?v=1646127381"},{"product_id":"through-hole-resistors-470-ohm-5-1-4w-pack-of-25","title":"Through-Hole Resistors - 470 ohm 5% 1\/4W - Pack of 25","description":"\u003cp\u003eΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!\u003c\/p\u003e\u003cp\u003eThis is a \u003cstrong\u003e25 Pack of 470Ω Resistors. \u003c\/strong\u003eMore specifically, they are \u003cstrong\u003ecarbon film\u003c\/strong\u003e, through-hole \u003cstrong\u003eaxial\u003c\/strong\u003e type, with \u003cstrong\u003e1\/4 Watt\u003c\/strong\u003e max dissipation, \u003cstrong\u003e300V\u003c\/strong\u003e max voltage, \u003cstrong\u003e5%\u003c\/strong\u003e precision resistors. Whew! These are super common and great for use in any kit, breadboard, perf-board, or other project. We got ones with 0.4mm thick wires so they plug in nicely into solder-less breadboards.\u003c\/p\u003e\u003cp\u003eWe have a slew of different resistor packs with different ohms of resistance; check them all out here!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/adafruit.com\/images\/product-files\/2780\/Resistor_Data_Sheet.pdf\"\u003eResistor Datasheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740109201,"sku":"104224","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/through-hole-resistors-470-ohm-5-1-4w-pack-of-25-the-pi-hut-104224-28609269596355.jpg?v=1646126829"},{"product_id":"through-hole-resistors-2-2k-ohm-5-1-4w-pack-of-25","title":"Through-Hole Resistors - 2.2K ohm 5% 1\/4W - Pack of 25","description":"\u003cp\u003eΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!\u003c\/p\u003e \u003cp\u003eThis is a \u003cstrong\u003e25 Pack of 2.2K Ω Resistors. \u003c\/strong\u003eMore specifically, they are \u003cstrong\u003ecarbon film\u003c\/strong\u003e, through-hole \u003cstrong\u003eaxial\u003c\/strong\u003e type, with \u003cstrong\u003e1\/4 Watt\u003c\/strong\u003e max dissipation, \u003cstrong\u003e300V\u003c\/strong\u003e max voltage, \u003cstrong\u003e5%\u003c\/strong\u003e precision resistors. Whew! These are super common and great for use in any kit, breadboard, perf-board, or other project. We got ones with 0.4mm thick wires so they plug in nicely into solder-less breadboards.\u003c\/p\u003e \u003cp\u003eWe have a slew of different resistor packs with different ohms of resistance; \u003ca href=\"https:\/\/thepihut.com\/collections\/maker-store\"\u003echeck them all out here\u003c\/a\u003e!\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003ch5\u003eTechnical details\u003c\/h5\u003e\n      \u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n        \n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/adafruit.com\/images\/product-files\/2780\/Resistor_Data_Sheet.pdf\"\u003eResistor Datasheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv style=\"display: inline;\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/RoHS2_2011_65_EU.svg?5383\" style=\"max-width: 146px; display: inline-block; margin-right: 20px;\"\u003e\n      \u003c\/div\u003e\n\u003cdiv style=\"display: inline;\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/RoHS2_2015_863_EU.svg?5383\" style=\"max-width: 146px; display: inline-block;\"\u003e\n      \u003c\/div\u003e\n\u003c\/div\u003e \u003cul id=\"product-files\"\u003e\n\u003c\/ul\u003e\n\n      \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740109521,"sku":"103734","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/through-hole-resistors-2-2k-ohm-5-1-4w-pack-of-25-the-pi-hut-103734-13717268201534.jpg?v=1646127190"},{"product_id":"through-hole-resistors-4-7k-ohm-5-1-4w-pack-of-25","title":"Through-Hole Resistors - 4.7K ohm 5% 1\/4W - Pack of 25","description":"\u003cp\u003eΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!\u003c\/p\u003e\u003cp\u003eThis is a \u003cstrong\u003e25 Pack of 4.7K Ω Resistors. \u003c\/strong\u003eMore specifically, they are \u003cstrong\u003ecarbon film\u003c\/strong\u003e, through-hole \u003cstrong\u003eaxial\u003c\/strong\u003e type, with \u003cstrong\u003e1\/4 Watt\u003c\/strong\u003e max dissipation, \u003cstrong\u003e300V\u003c\/strong\u003e max voltage, \u003cstrong\u003e5%\u003c\/strong\u003e precision resistors. Whew! These are super common and great for use in any kit, breadboard, perf-board, or other project. We got ones with 0.4mm thick wires so they plug in nicely into solder-less breadboards.\u003c\/p\u003e\u003cp\u003eWe have a slew of different resistor packs with different ohms of resistance; check them all out here!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/adafruit.com\/images\/product-files\/2780\/Resistor_Data_Sheet.pdf\"\u003eResistor Datasheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740110417,"sku":"104225","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/through-hole-resistors-4-7k-ohm-5-1-4w-pack-of-25-the-pi-hut-104225-28609273757891.jpg?v=1646127011"},{"product_id":"through-hole-resistors-10k-ohm-5-1-4w-pack-of-25","title":"Through-Hole Resistors - 10K ohm 5% 1\/4W - Pack of 25","description":"\u003cp\u003eΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!\u003c\/p\u003e\u003cp\u003eThis is a \u003cstrong\u003e25 Pack of 10K Ω Resistors. \u003c\/strong\u003eMore specifically, they are \u003cstrong\u003ecarbon film\u003c\/strong\u003e, through-hole \u003cstrong\u003eaxial\u003c\/strong\u003e type, with \u003cstrong\u003e1\/4 Watt\u003c\/strong\u003e max dissipation, \u003cstrong\u003e300V\u003c\/strong\u003e max voltage, \u003cstrong\u003e5%\u003c\/strong\u003e precision resistors. Whew! These are super common and great for use in any kit, breadboard, perf-board, or other project. We got ones with 0.4mm thick wires so they plug in nicely into solder-less breadboards.\u003c\/p\u003e\u003cp\u003eWe have a slew of different resistor packs with different ohms of resistance; check them all out here!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/adafruit.com\/images\/product-files\/2780\/Resistor_Data_Sheet.pdf\"\u003eResistor Datasheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740110993,"sku":"104226","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/through-hole-resistors-10k-ohm-5-1-4w-pack-of-25-the-pi-hut-104226-28609268940995.jpg?v=1646127379"},{"product_id":"through-hole-resistors-22k-ohm-5-1-4w-pack-of-25","title":"Through-Hole Resistors - 22K ohm 5% 1\/4W - Pack of 25","description":"\u003cp\u003eΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!\u003c\/p\u003e\u003cp\u003eThis is a \u003cstrong\u003e25 Pack of 22K Ω Resistors. \u003c\/strong\u003eMore specifically, they are \u003cstrong\u003ecarbon film\u003c\/strong\u003e, through-hole \u003cstrong\u003eaxial\u003c\/strong\u003e type, with \u003cstrong\u003e1\/4 Watt\u003c\/strong\u003e max dissipation, \u003cstrong\u003e300V\u003c\/strong\u003e max voltage, \u003cstrong\u003e5%\u003c\/strong\u003e precision resistors. Whew! These are super common and great for use in any kit, breadboard, perf-board, or other project. We got ones with 0.4mm thick wires so they plug in nicely into solder-less breadboards.\u003c\/p\u003e\u003cp\u003eWe have a slew of different resistor packs with different ohms of resistance; check them all out here!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/adafruit.com\/images\/product-files\/2780\/Resistor_Data_Sheet.pdf\"\u003eResistor Datasheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740112017,"sku":"104227","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/through-hole-resistors-22k-ohm-5-1-4w-pack-of-25-the-pi-hut-104227-28609268777155.jpg?v=1646898484"},{"product_id":"through-hole-resistors-47k-ohm-5-1-4w-pack-of-25","title":"Through-Hole Resistors - 47K ohm 5% 1\/4W - Pack of 25","description":"\u003cp\u003eΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!\u003c\/p\u003e\u003cp\u003eThis is a \u003cstrong\u003e25 Pack of 47K Ω Resistors. \u003c\/strong\u003eMore specifically, they are \u003cstrong\u003ecarbon film\u003c\/strong\u003e, through-hole \u003cstrong\u003eaxial\u003c\/strong\u003e type, with \u003cstrong\u003e1\/4 Watt\u003c\/strong\u003e max dissipation, \u003cstrong\u003e300V\u003c\/strong\u003e max voltage, \u003cstrong\u003e5%\u003c\/strong\u003e precision resistors. Whew! These are super common and great for use in any kit, breadboard, perf-board, or other project. We got ones with 0.4mm thick wires so they plug in nicely into solder-less breadboards.\u003c\/p\u003e\u003cp\u003eWe have a slew of different resistor packs with different ohms of resistance; check them all out here!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/adafruit.com\/images\/product-files\/2780\/Resistor_Data_Sheet.pdf\"\u003eResistor Datasheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740112657,"sku":"104228","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/through-hole-resistors-47k-ohm-5-1-4w-pack-of-25-the-pi-hut-104228-28609269825731.jpg?v=1646126840"},{"product_id":"through-hole-resistors-100k-ohm-5-1-4w-pack-of-25","title":"Through-Hole Resistors - 100K ohm 5% 1\/4W - Pack of 25","description":"\u003cp\u003eΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!\u003c\/p\u003e \u003cp\u003eThis is a \u003cstrong\u003e25 Pack of 100K Ω Resistors. \u003c\/strong\u003eMore specifically, they are \u003cstrong\u003ecarbon film\u003c\/strong\u003e, through-hole \u003cstrong\u003eaxial\u003c\/strong\u003e type, with \u003cstrong\u003e1\/4 Watt\u003c\/strong\u003e max dissipation, \u003cstrong\u003e300V\u003c\/strong\u003e max voltage, \u003cstrong\u003e5%\u003c\/strong\u003e precision resistors. Whew! These are super common and great for use in any kit, breadboard, perf-board, or other project. We got ones with 0.4mm thick wires so they plug in nicely into solder-less breadboards.\u003c\/p\u003e \u003cp\u003eWe have a slew of different resistor packs with different ohms of resistance; \u003ca href=\"https:\/\/thepihut.com\/collections\/adafruit-components-parts\/Resistors\"\u003echeck them all out here\u003c\/a\u003e!\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003ch5\u003eTechnical details\u003c\/h5\u003e\n      \u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n        \n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/adafruit.com\/images\/product-files\/2780\/Resistor_Data_Sheet.pdf\"\u003eResistor Datasheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv style=\"display: inline;\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/RoHS2_2011_65_EU.svg?5383\" style=\"max-width: 146px; display: inline-block; margin-right: 20px;\"\u003e\n      \u003c\/div\u003e\n\u003cdiv style=\"display: inline;\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/RoHS2_2015_863_EU.svg?5383\" style=\"max-width: 146px; display: inline-block;\"\u003e\n      \u003c\/div\u003e\n\u003c\/div\u003e \u003cul id=\"product-files\"\u003e\n\u003c\/ul\u003e\n\n      \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740115281,"sku":"103735","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/through-hole-resistors-100k-ohm-5-1-4w-pack-of-25-the-pi-hut-103735-13719605248062.jpg?v=1646127366"},{"product_id":"mini-analog-joystick-10k-potentiometers","title":"Mini Analog Joystick - 10K Potentiometers","description":"\u003cp\u003eSometimes a simple analog control device can be the perfect tactile solution for your project, but they can be surprisingly hard to come by. Luckily we've found a low cost, quality\u003cstrong\u003e Mini Analog Joystick\u003c\/strong\u003e to fill you directional analog input needs!\u003c\/p\u003e\u003cp\u003eUnlike most arcade-style joysticks which come with four clicking switches, this product has two 10KΩ potentiometers and a spring-back system. You can get a full 50 degrees in both X and Y directions. Connect one side of each potentiometer to ground, and the other side to a higher voltage and read the analog voltage off the middle. Great for robotics and other control interfaces. This joystick is durable and has a great feel to it. You could replace the springs if you want a stronger or weaker spring-back force.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cul\u003e\n\u003cli\u003eResistance Value: 10 Kohm\u003c\/li\u003e\n\u003cli\u003eResistance Tolerance: ±10%\u003c\/li\u003e\n\u003cli\u003eIndependent Linearity: ±1%\u003c\/li\u003e\n\u003cli\u003eTemperature Coefficient Resistance: ±400ppm\/°C\u003c\/li\u003e\n\u003cli\u003eOutput Smoothness: 0.5% max\u003c\/li\u003e\n\u003cli\u003eX and Y Axis range: ±25°\u003c\/li\u003e\n\u003cli\u003eMechanical Lifecycle: 500,000 cycle\u003c\/li\u003e\n\u003cli\u003eOperating Temperature Range: -10~80°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Dimensions: 67.4mm x 52.7mm x 52.7mm \/ 2.7\" x 2.1\" x 2.1\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 55.9g \/ 2.0oz \u003c\/p\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740321937,"sku":"105717","price":19.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/mini-analog-joystick-10k-potentiometers-the-pi-hut-ada3102-28610416836803.jpg?v=1646361739"},{"product_id":"breadboard-trim-potentiometer","title":"Breadboard-friendly Trim Potentiometer","description":"\u003cp\u003eThese potentiometers are great for project prototyping. The three legs are spaced to fit perfectly in our range of \u003ca href=\"\/collections\/solderless-breadboards\"\u003esolderless breadboards\u003c\/a\u003e, giving each leg its own lane for hooking up to your microcontroller with \u003ca href=\"\/products\/thepihuts-jumper-bumper-pack-120pcs-dupont-wire\"\u003ejumper wires\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAvailable in a range of values, each has a textured adjustment knob and the rating printed on the side (see below for ratings in case you mix them up!).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelect the rating you need before adding to your cart!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eBody size: 9.5mm x 9.5mm x 4.9mm\u003c\/li\u003e\n\u003cli\u003eRotation: 270 degrees\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRatings available\u003c\/h2\u003e\n\u003ctable width=\"271\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"78\" style=\"text-align: center;\"\u003e\u003cstrong\u003eRating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"193\" style=\"text-align: center;\"\u003e\u003cstrong\u003eCode (printed on body)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1K\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e102\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e2K\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e202\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e5K\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e502\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e10K\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e103\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e20K\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e203\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e50K\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e503\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"1K","offer_id":41768099184835,"sku":"104958","price":0.8,"currency_code":"GBP","in_stock":true},{"title":"2K","offer_id":41768099217603,"sku":"104959","price":0.8,"currency_code":"GBP","in_stock":true},{"title":"5K","offer_id":41768099283139,"sku":"104960","price":0.8,"currency_code":"GBP","in_stock":true},{"title":"10K","offer_id":41768099315907,"sku":"102831","price":0.8,"currency_code":"GBP","in_stock":true},{"title":"20K","offer_id":41768099348675,"sku":"104961","price":0.8,"currency_code":"GBP","in_stock":true},{"title":"50K","offer_id":41768099381443,"sku":"104962","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/breadboard-trim-potentiometer-10k-the-pi-hut-102831-35663943041219.jpg?v=1651764775"},{"product_id":"smt-smd-0805-resistor-and-capacitor-book-3725-pieces","title":"SMT\/SMD 0805 Resistor and Capacitor Book - 3725 pieces","description":"\u003cp\u003eAlways have the right SMT components at your hand with this awesome 0805 Resistor and Capacitor book set! This book has nice translucent pages filled with cut tape \u003cb\u003eSMT 0805 components\u003c\/b\u003e, sorted, labeled and ready to go. This book has \u003cb\u003e63 5% resistor values, 3025 parts\u003c\/b\u003e and \u003cb\u003e17 capacitor values, 700 parts\u003c\/b\u003e. The nice thing is that you get a good distribution of the resistors, with more 1K and 10KΩ and fewer of the really high values.\u003cbr\u003e\n\n\u003cbr\u003e\n\n63 5% Yageo resistor values:\u003c\/p\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003e\n\u003cb\u003e100 pieces each of the following:\u003c\/b\u003e 0Ω, 1KΩ, 10KΩ\u003c\/li\u003e\n\n\t\u003cli\u003e\n\u003cb\u003e50 pieces each of the following:\u003c\/b\u003e 1Ω, 1.2Ω, 1.5Ω, 2Ω, 2.7Ω, 3.3Ω, 4.3Ω, 5.1Ω, 6.8Ω, 8.2Ω, 10Ω, 12Ω, 15Ω, 20Ω, 27Ω, 33Ω, 43Ω, 51Ω, 68Ω, 82Ω, 100Ω, 120Ω, 150Ω, 200Ω, 270Ω, 330Ω, 430Ω, 510Ω, 680Ω, 820Ω, 1.2KΩ, 1.5KΩ, 2KΩ, 2.7KΩ, 3.3KΩ, 4.3KΩ, 5.1KΩ, 6.8KΩ, 8.2KΩ, 12KΩ, 15KΩ, 29KΩ, 27KΩ, 33KΩ, 43KΩ, 51KΩ, 68KΩ, 82KΩ, 100KΩ\u003c\/li\u003e\n\n\t\u003cli\u003e\n\u003cb\u003e25 pieces each of the following:\u003c\/b\u003e 120KΩ, 150KΩ, 200KΩ, 270KΩ, 330KΩ, 430KΩ, 510KΩ, 680KΩ, 820KΩ, 1MΩ, 2MΩ\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003cp\u003e17 Murata capacitor values:\u003c\/p\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003e\n\u003cb\u003e100 pieces each of the following:\u003c\/b\u003e 22pF ±5% 50V C0G, 0.1uF ±10% 25V X7R\u003c\/li\u003e\n\n\t\u003cli\u003e\n\u003cb\u003e50 pieces each of the following:\u003c\/b\u003e 27pF ±5% 50V C0G, 33pF ±5% 50V C0G, 100pF ±5% 50V C0G, 0.47uF ±10% X7R, 1.0uF ±10% X7R\u003c\/li\u003e\n\n\t\u003cli\u003e\n\u003cb\u003e25 pieces each of the following:\u003c\/b\u003e 15pF ±5% 50V C0G, 47pF ±5% 50V C0G, 68pF ±5% 50V C0G, 82pF ±5% 50V C0G, 120pF ±5% 50V C0G, 150pF ±5% 50V C0G, 180pF ±5% 50V C0G, 220pF ±5% 50V C0G, 1nF ±10% 50V X7R,10nF ±10% 50V X7R\u003c\/li\u003e\n\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003cb\u003eDimensions:\u003c\/b\u003e 7.5\" x 5.5\" x 1.25\" (19cm x 14cm x 3.5cm)\u003cbr\u003e \u003cbr\u003e \u003cb\u003eWeight:\u003c\/b\u003e 375 grams (13 oz)\u003cbr\u003e \u003cbr\u003e 63 5% Yageo resistor values:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cb\u003e100 pieces each of the following:\u003c\/b\u003e 0Ω, 1KΩ, 10KΩ\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003e50 pieces each of the following:\u003c\/b\u003e 1Ω, 1.2Ω, 1.5Ω, 2Ω, 2.7Ω, 3.3Ω, 4.3Ω, 5.1Ω, 6.8Ω, 8.2Ω, 10Ω, 12Ω, 15Ω, 20Ω, 27Ω, 33Ω, 43Ω, 51Ω, 68Ω, 82Ω, 100Ω, 120Ω, 150Ω, 200Ω, 270Ω, 330Ω, 430Ω, 510Ω, 680Ω, 820Ω, 1.2KΩ, 1.5KΩ, 2KΩ, 2.7KΩ, 3.3KΩ, 4.3KΩ, 5.1KΩ, 6.8KΩ, 8.2KΩ, 12KΩ, 15KΩ, 29KΩ, 27KΩ, 33KΩ, 43KΩ, 51KΩ, 68KΩ, 82KΩ, 100KΩ\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003e25 pieces each of the following:\u003c\/b\u003e 120KΩ, 150KΩ, 200KΩ, 270KΩ, 330KΩ, 430KΩ, 510KΩ, 680KΩ, 820KΩ, 1MΩ, 2MΩ\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e17 Murata capacitor values:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cb\u003e100 pieces each of the following:\u003c\/b\u003e 22pF ±5% 50V C0G, 0.1uF ±10% 25V X7R\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003e50 pieces each of the following:\u003c\/b\u003e 27pF ±5% 50V C0G, 33pF ±5% 50V C0G, 100pF ±5% 50V C0G, 0.47uF ±10% X7R, 1.0uF ±10% X7R\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003e25 pieces each of the following:\u003c\/b\u003e 15pF ±5% 50V C0G, 47pF ±5% 50V C0G, 68pF ±5% 50V C0G, 82pF ±5% 50V C0G, 120pF ±5% 50V C0G, 150pF ±5% 50V C0G, 180pF ±5% 50V C0G, 220pF ±5% 50V C0G, 1nF ±10% 50V X7R,10nF ±10% 50V X7R\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27740424721,"sku":"ADA441","price":38.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/smt-smd-0805-resistor-and-capacitor-book-3725-pieces-the-pi-hut-ada441-28610745303235.jpg?v=1646190730"},{"product_id":"smt-0603-resistor-and-capacitor-book-3725-pieces","title":"SMT 0603 Resistor and Capacitor Book - 3725 pieces","description":"\u003cp\u003eAlways have the right SMT components at your hand with this awesome 0603 Resistor and Capacitor book set! This book has nice translucent pages filled with cut tape \u003cstrong\u003e0603 SMT components\u003c\/strong\u003e, sorted, labeled and ready to go. This book has \u003cstrong\u003e63 5% resistor values, 3025 parts\u003c\/strong\u003e and \u003cstrong\u003e17 capacitor values, 700 parts\u003c\/strong\u003e. The nice thing is that you get a good distribution of the resistors, with more 1K and 10KΩ and fewer of the really high values.\u003cbr\u003e\u003cbr\u003e63 5% Yageo resistor values:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 pieces each of the following:\u003c\/strong\u003e 0Ω, 1KΩ, 10KΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 pieces each of the following:\u003c\/strong\u003e 1Ω, 1.2Ω, 1.5Ω, 2Ω, 2.7Ω, 3.3Ω, 4.3Ω, 5.1Ω, 6.8Ω, 8.2Ω, 10Ω, 12Ω, 15Ω, 20Ω, 27Ω, 33Ω, 43Ω, 51Ω, 68Ω, 82Ω, 100Ω, 120Ω, 150Ω, 200Ω, 270Ω, 330Ω, 430Ω, 510Ω, 680Ω, 820Ω, 1.2KΩ, 1.5KΩ, 2KΩ, 2.7KΩ, 3.3KΩ, 4.3KΩ, 5.1KΩ, 6.8KΩ, 8.2KΩ, 12KΩ, 15KΩ, 29KΩ, 27KΩ, 33KΩ, 43KΩ, 51KΩ, 68KΩ, 82KΩ, 100KΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 pieces each of the following:\u003c\/strong\u003e 120KΩ, 150KΩ, 200KΩ, 270KΩ, 330KΩ, 430KΩ, 510KΩ, 680KΩ, 820KΩ, 1MΩ, 2MΩ\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e17 Murata capacitor values:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 pieces each of the following:\u003c\/strong\u003e 22pF ±5% 50V C0G, 0.1uF ±10% 25V X7R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 pieces each of the following:\u003c\/strong\u003e 27pF ±5% 50V C0G, 33pF ±5% 50V C0G, 100pF ±5% 50V C0G, 0.47uF ±10% X7R, 1.0uF ±10% X7R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 pieces each of the following:\u003c\/strong\u003e 15pF ±5% 50V C0G, 47pF ±5% 50V C0G, 68pF ±5% 50V C0G, 82pF ±5% 50V C0G, 120pF ±5% 50V C0G, 150pF ±5% 50V C0G, 180pF ±5% 50V C0G, 220pF ±5% 50V C0G, 1nF ±10% 50V X7R,10nF ±10% 50V X7R\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7.5\" x 5.5\" x 1.25\" (19cm x 14cm x 3.5cm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 375 grams (13 oz)\u003cbr\u003e\u003cbr\u003e63 5% Yageo resistor values:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 pieces each of the following:\u003c\/strong\u003e 0Ω, 1KΩ, 10KΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 pieces each of the following:\u003c\/strong\u003e 1Ω, 1.2Ω, 1.5Ω, 2Ω, 2.7Ω, 3.3Ω, 4.3Ω, 5.1Ω, 6.8Ω, 8.2Ω, 10Ω, 12Ω, 15Ω, 20Ω, 27Ω, 33Ω, 43Ω, 51Ω, 68Ω, 82Ω, 100Ω, 120Ω, 150Ω, 200Ω, 270Ω, 330Ω, 430Ω, 510Ω, 680Ω, 820Ω, 1.2KΩ, 1.5KΩ, 2KΩ, 2.7KΩ, 3.3KΩ, 4.3KΩ, 5.1KΩ, 6.8KΩ, 8.2KΩ, 12KΩ, 15KΩ, 29KΩ, 27KΩ, 33KΩ, 43KΩ, 51KΩ, 68KΩ, 82KΩ, 100KΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 pieces each of the following:\u003c\/strong\u003e 120KΩ, 150KΩ, 200KΩ, 270KΩ, 330KΩ, 430KΩ, 510KΩ, 680KΩ, 820KΩ, 1MΩ, 2MΩ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e17 Murata capacitor values:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 pieces each of the following:\u003c\/strong\u003e 22pF ±5% 50V C0G, 0.1uF ±10% 25V X7R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 pieces each of the following:\u003c\/strong\u003e 27pF ±5% 50V C0G, 33pF ±5% 50V C0G, 100pF ±5% 50V C0G, 0.47uF ±10% X7R, 1.0uF ±10% X7R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 pieces each of the following:\u003c\/strong\u003e 15pF ±5% 50V C0G, 47pF ±5% 50V C0G, 68pF ±5% 50V C0G, 82pF ±5% 50V C0G, 120pF ±5% 50V C0G, 150pF ±5% 50V C0G, 180pF ±5% 50V C0G, 220pF ±5% 50V C0G, 1nF ±10% 50V X7R,10nF ±10% 50V X7R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27740424785,"sku":"ADA442","price":38.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/smt-0603-resistor-and-capacitor-book-3725-pieces-the-pi-hut-ada442-28610744942787.jpg?v=1646186587"},{"product_id":"panel-mount-10k-potentiometer-breadboard-friendly","title":"Panel Mount 10K potentiometer (Breadboard Friendly) (10K Linear)","description":"\u003cp\u003eA 10k linear potentiometer which works perfectly both in a breadboard, fixed to a panel or soldered to a PCB.\u003c\/p\u003e\n\u003cp\u003eThe potentiometer has a 16mm body and a 300\u003cspan\u003e°\u003c\/span\u003e rotation travel. It's designed to stand up to 100,000 cycles so it should outlast any project you throw at it!\u003c\/p\u003e\n\u003cp\u003eMount the potentiometer to a panel (just like a volume dial!) by simply drilling a hole and securing with the included nut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003e10K ohm potentiometer\u003c\/li\u003e\n\u003cli\u003eLinear\u003c\/li\u003e\n\u003cli\u003e100,000 Cycle Life\u003c\/li\u003e\n\u003cli\u003e16mm Body\u003c\/li\u003e\n\u003cli\u003eRotational travel: 300°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":27740444817,"sku":"102841","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/panel-mount-10k-potentiometer-breadboard-friendly-10k-linear-the-pi-hut-102841-15177523036222.jpg?v=1646370544"},{"product_id":"gravity-analog-slide-position-potentiometer-sensor-for-arduino","title":"Gravity: Analog Slide Position (Potentiometer) Sensor For Arduino","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eThis Slide Position Sensor is based on a straight-slip slide potentiometer sensor. The sensor is able to give provide the position of the slider which is often considered a linear potentiometer.\u003c\/p\u003e\n\u003cp\u003eThe sensor includes two analogue outputs to allow the user to average the values and minimize random sensor fluctuations.\u003c\/p\u003e\n\u003cp\u003eTo ease the difficult of using this sensor, a Gravity Interface is adapted to allow plug\u0026amp;play.\u003c\/p\u003e\n\u003cp\u003eA slide potentiometer is commonly seen in music mixers.\u003c\/p\u003e\n\u003ch2\u003eConnection Example - DFRduino UNO \u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Analog_Slide_Position_Potentiometer_features_1.jpg?v=1693925432\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 1.42857;\"\u003eVoltage: +5V\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInterface Type: Analog\u003c\/li\u003e\n\u003cli\u003e5.4kΩ resistance value\u003c\/li\u003e\n\u003cli\u003eHigh quality connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/wiki\/index.php\/Analog_Slide_Position_Sensor_(SKU:_DFR0053)\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/image.dfrobot.com\/image\/data\/DFR0053\/Analog%20Slide%20Position%20Sensor.pdf\"\u003eSchematics\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e1x Analog Slide Position (Potentiometer)\u003c\/li\u003e\n\u003cli\u003e1x \u003ca href=\"\/products\/analog-sensor-cable-for-arduino-10-pack\"\u003eAnalog Sensor Cable\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":27740627921,"sku":"DFR0053","price":3.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/gravity-analog-slide-position-potentiometer-sensor-for-arduino-dfrobot-dfr0053-40850791071939.jpg?v=1693925769"},{"product_id":"gravity-analog-rotation-potentiometer-sensor-v1-for-arduino","title":"Gravity: Analog Rotation Potentiometer Sensor","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003eThis is a rotation potentiometer able to rotate up to 300-degrees. With the Arduino IO expansion board, in combination, it can be very easy to achieve position-dependent interaction with the rotating effect or produce MIDI instrument. So with this sensor, you can learn how rotary potentiometer works and what analog signal is. You can have much fun with this basic input device.\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eGravity Interface is adapted to allow plug\u0026amp;play. The \u003ca href=\"https:\/\/thepihut.com\/products\/gravity-io-expansion-shield-for-arduino-v7-1\" target=\"_blank\"\u003eIO Sensor Expansion Shield\u003c\/a\u003e\u003cspan style=\"line-height: 17.1428px;\"\u003e is the best match for this sound senor connecting to your \u003ca href=\"https:\/\/thepihut.com\/collections\/arduino-store\" target=\"_blank\"\u003eArduino\u003c\/a\u003e. As this sensor can work at 3.3V which make it compatible with \u003c\/span\u003eRaspberry Pi, intel edison, joule, and curie.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: DFRduino and Expansion Shield are NOT included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWide voltage range from 3.3V to 5V\u003c\/li\u003e\n\u003cli\u003eStandard assembling structure (Times-of-5mm Center distance between two 3mm mounting holes)\u003c\/li\u003e\n\u003cli\u003eEasily recognitive interfaces of sensors (\"A\" for analog and \"D\" for digital)\u003c\/li\u003e\n\u003cli\u003eHigh-quality connector\u003c\/li\u003e\n\u003cli\u003eImmersion gold surface \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConnection Example - DFRduino UNO\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Analog_Rotation_Potentiometer_Sensor_features_1.jpg?v=1693922194\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"line-height: 17.1428px;\"\u003eSupply Voltage: 3.3V to 5V\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInterface type: Analog\u003c\/li\u003e\n\u003cli\u003e300 degree rotation sensor\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003eSize: 22 x 31mm\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/wiki\/index.php\/Analog_Rotation_Sensor_V1_(SKU:_DFR0054)\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/image.dfrobot.com\/image\/data\/DFR0054\/Rotation%20Sensor-L%20V2%20SCH.pdf\"\u003eSchematics\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e1x Analog Rotation Potentiometer Sensor V1\u003c\/li\u003e\n\u003cli\u003e1x Analog Sensor Cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":27740628177,"sku":"DFR0054","price":2.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/gravity-analog-rotation-potentiometer-sensor-dfrobot-dfr0054-40850765152451.jpg?v=1693924872"},{"product_id":"gravity-analog-rotation-potentiometer-sensor-v2-for-arduino","title":"Gravity: Analog Rotation Potentiometer Sensor for Arduino - Rotation 3600°","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cp\u003eThis Arduino Rotation Potentimeter Sensor is a multi-ring rotation sensor. It is based on multi-turn precision potentiometer. It can rotate up to 10 laps. The voltage can be subdivided into 1024 copies. This sensor provides a more accurate reading.\u003c\/p\u003e\n\u003cp\u003eThis is sensor can also be used as a simple encoder if the rotation degree is not over 3600 degree.\u003c\/p\u003e\n\u003cp\u003eGravity (sensors, shield and modules for Arduino) \u003cspan style=\"line-height: 17.1428px;\"\u003eInterface is adapted to allow plug \u0026amp; play. The \u003c\/span\u003e\u003ca style=\"line-height: 17.1428px;\" href=\"https:\/\/thepihut.com\/products\/gravity-io-expansion-shield-for-arduino-v7-1\" target=\"_blank\"\u003eIO Sensor Expansion Shield\u003c\/a\u003e\u003cspan style=\"line-height: 17.1428px;\"\u003e is the best match for this sound senor connecting to your \u003c\/span\u003e\u003ca style=\"line-height: 17.1428px;\" href=\"https:\/\/thepihut.com\/collections\/arduino-store\" target=\"_blank\"\u003eArduino\u003c\/a\u003e\u003cspan style=\"line-height: 17.1428px;\"\u003e. As this sensor can work at 3.3V which make it compatible with \u003c\/span\u003eRaspberry Pi\u003cspan style=\"line-height: 17.1428px;\"\u003e, \u003c\/span\u003eintel edison\u003cspan style=\"line-height: 17.1428px;\"\u003e, joule and curie.\u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Expansion Shield and LED board are NOT included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eConnection Example - Expansion Shield V7\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Analog_Rotation_Potentiometer_Sensor_for_Arduino_features_1.jpg?v=1693919613\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/wiki\/index.php\/Analog_Rotation_Sensor_V2_(SKU:_DFR0058)\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e1x Rotation \u003cspan style=\"line-height: 17.1428px;\"\u003ePotentimeter \u003c\/span\u003eSensor V2\u003c\/li\u003e\n\u003cli\u003e1x Analog Sensor Cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":27740628433,"sku":"DFR0058","price":3.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/gravity-analog-rotation-potentiometer-sensor-for-arduino-rotation-3600-dfrobot-dfr0058-40850702860483.jpg?v=1693920889"},{"product_id":"potentiometers-kit-55pcs","title":"Potentiometers Kit (55PCS)","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e\n\u003cdiv\u003eVariable resistors also named as potentiometer are electrical equipments having two terminal points in opposite direction. The terminals are used for electrical resistance in a circuit board.\nVariable resistors are very economical and helpful for every kind of electronic and electrical circuit systems. They acts as resistance for high voltage current pass and maintains an average volt for normal\nwork outs,They are commonly used to control electrical devices such as volume controls on audio equipment.This Variable Resistor Kit contains 6 small packages of blue and white resistors with 11 different values from 200~500KΩ in it.\u003c\/div\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eColor:Blue\u0026amp;White\u003c\/li\u003e\n\u003cli\u003eMaterial:PBT\u003c\/li\u003e\n\u003cli\u003eRated power:0.1W\u003c\/li\u003e\n\u003cli\u003eWorking voltage:50V\u003c\/li\u003e\n\u003cli\u003ePackage:Horizontal DIP\u003c\/li\u003e\n\u003cli\u003eSize:70x70x12mm (2.76x2.76x0.47\")\u003c\/li\u003e\n\u003cli\u003ePin distance:5.08*5.06*5.06mm (0.2x0.19x0.19\")\u003c\/li\u003e\n\u003cli\u003eWeight:5g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eIntroduction of variable resistor        \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul style=\"\"\u003e\n\u003cli\u003e201(200Ω)   x5\u003cbr\u003e\n501(500Ω)   x5\u003cbr\u003e\n102(1K)       x5\u003cbr\u003e\n202(2K)       x5\u003cbr\u003e\n502(5K)       x5\u003cbr\u003e\n103(10K)      x5\u003cbr\u003e\n203(20K)      x5\u003cbr\u003e\n503(50K)      x5\u003cbr\u003e\n104(100K)     x5\u003cbr\u003e\n204(200K)     x5\u003cbr\u003e\n504(500K)     x5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":27740796945,"sku":"FIT0189","price":5.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/potentiometers-kit-55pcs-dfrobot-fit0189-28601521340611.jpg?v=1646378643"},{"product_id":"smd-resistor-0805-5-500pcs","title":"SMD Resistor - 0805 ± 5% (500PCS)","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e\n\u003cdiv\u003eSurface mount device , SMD, resistors are the most widely used electronic component. They're designed to have small metal tabs that could be directly soldered to the surface of the PCB.It makes your design much smaller and compact than through-hole components. Because it needs fewer holes to be drilled.\u003c\/div\u003e\n\u003cdiv\u003eThis package includes 25 strip of 20 SMD resistors - 0805. It covers commonly used smd resistors.But due to the small sizes and lead spacings of many SMDs, soldering this smd resistors requires skilled operators and more expensive tools for your component-level repair or manual prototype assembly.\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color:#ff0000;\"\u003eNote: These strips are cut by hand, please forgive us if some strips come with 1 or 2 pieces less. On the plus side, you could get 1 or 2 pieces more :D\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003ch2\u003e Applications\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003esuitable for compact circuit boards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e620R-12K 5% 0805 resistors\u003c\/li\u003e\n\u003cli\u003e1\/10th Watt\u003c\/li\u003e\n\u003cli\u003eSize of resistors: 2.0x1.3mm (0.08x0.05 Inches)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/image.dfrobot.com\/image\/data\/FIT0190\/Recommended%20Solder%20Pad%20Dimensions.pdf\"\u003eRecommended Solder Pad Dimensions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e620ohm\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e680ohm\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e750ohm\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e820ohm\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e1K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e1.2K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e1.5K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e2K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e2.2K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e2.4K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e2.7K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e3K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20 \u003c\/li\u003e\n\u003cli\u003e3.3K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e3.6K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e3.9K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e4.3K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e4.7K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e5.1K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e5.6K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e6.8K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e7.5K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e8.2K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e9.1K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e10K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003cli\u003e12K\u003cspan class=\"Apple-tab-span\" style=\"white-space:pre\"\u003e \u003c\/span\u003ex20\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":27740797073,"sku":"FIT0190","price":4.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/smd-resistor-0805-5-500pcs-dfrobot-fit0190-28601520881859.jpg?v=1646186946"},{"product_id":"ecell-breadboard-plugin-resistor","title":"ECell: Breadboard-Plugin Resistor","description":"\u003cdiv class=\"desc\"\u003e\n \u003cdiv class=\"desCon\"\u003e Introducing \"The Breadboard-Plugin Kit\" - the first kit in the ECell series. The Breadboard-Plugin Kit provides a range of common components such as resistors, capacitors, diodes, transistors etc. that are compatible with a solderless breadboard. This resistor package module has gold-plated pins making it solid and durable and also gives it excellent conductivity. It plugs neatly and easily in the breadboard and is both reliable and reusable.\u003cbr\u003e\n\u003cbr\u003e\nUsing this innovative approach solves common problems that occur when using DIP components, such as:\n\u003cdiv style=\"margin-left: 40px;\"\u003e*Difficulty reading confusing resistor color codes\u003cbr\u003e\n*Deforming component pins and breadboard tie-points after use\u003cbr\u003e\n*Using components with a different pin-pitch than your breadboard\u003cbr\u003e\n*Confusing the order of a transistor's collector, emitter and base pins\u003cbr\u003e\n*Using a confusing mess of jumper wires to connect small components\u003c\/div\u003e\n\u003cbr\u003e\n\u003cspan style=\"color:#FF8C00;\"\u003eThe Breadboard-Plugin Kit is designed by Maker LeoYan, and is produced and sold by DFRobot\u003c\/span\u003e \u003cbr\u003e\n\u003cbr\u003e\nThis is a Resistor package only,\u003cspan style=\"line-height: 27.7333px;\"\u003eclick \u003ca href=\"https:\/\/thepihut.com\/products\/ecell-breadboard-plugin-components-pack\"\u003eECell: Breadboard-Plugin Components Pack \u003c\/a\u003e to get the whole component kit\u003c\/span\u003e.\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/div\u003e \u003ch2\u003e Features\u003cbr\u003e\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to recognize\u003c\/strong\u003e: resistance values, capacitance values, polarity and pin functions are clearly marked on each component\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to learn\u003c\/strong\u003e: standard circuit symbols are clearly marked on each component helping you learn how to read schematic diagrams\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to use\u003c\/strong\u003e: Pins plug directly in to the breadboard, saving a confusing mess of jumper wires\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to Plug\/unplug\u003c\/strong\u003e: The 0.64mm diametral pin perfectly matches standard breadboard tie-points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-reliability\u003c\/strong\u003e: Each component is manufactured using ENIG technology making the circuit connection reliable and durable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmentally-friendly\u003c\/strong\u003e: Each part is durable and reusable making it friendly to the environment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Specification\u003cbr\u003e\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eResistor: 220R，1K，4.7K，10K\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Documents\u003cbr\u003e\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/\/www.dfrobot.com\/wiki\/index.php?title=Breadboard_Plugin_Components_Pack_SKU:KIT0098\"\u003eWiki Doc\u003c\/a\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003ch2\u003e Shipping List\u003cbr\u003e\n\u003c\/h2\u003e \u003cdiv class=\"desCon\"\u003e\n\u003cul\u003e\n\u003cli\u003eResistor 220R x4\u003c\/li\u003e\n\u003cli\u003eResistor 1K x4\u003c\/li\u003e\n\u003cli\u003eResistor 4.7K x4\u003c\/li\u003e\n\u003cli\u003eResistor 10K x4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":27740900369,"sku":"FIT0423","price":6.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/ecell-breadboard-plugin-resistor-dfrobot-fit0423-28601584025795.jpg?v=1646569083"},{"product_id":"panel-mount-10k-log-potentiometer-breadboard-friendly","title":"Panel Mount 10K Log Potentiometer (Breadboard Friendly) (10K Log)","description":"\u003cp\u003eThis potentiometer is a two-in-one, good in a breadboard or with a panel. It's a \u003cstrong\u003elog taper\u003c\/strong\u003e 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2\" apart with pin-points, so you can plug it into a breadboard or perfboard. Once you're done prototyping, you can drill a hole into your project box and mount the potentiometer that way.\u003c\/p\u003e \u003cp\u003ePotentiometers, or \"pots\" to electronics enthusiasts, are differentiated by how quickly their resistance changes. In linear pots, the amount of resistance changes in a direct pattern. If you turn or slide it halfway, its resistance will be halfway between its minimum and maximum settings. That's ideal for controlling lights or a fan, but not necessarily for audio controls. Volume controls have to cater to the human ear, which isn't linear. Instead, \u003cstrong\u003elogarithmic pots\u003c\/strong\u003e like this one increase their resistance on a curve. At the halfway point volume will still be moderate, but it will increase sharply as you keep turning up the volume. This corresponds to how the human ear hears. Using a log pot therefore gives the effect that a setting of full volume on the control sounds twice as loud as a setting of half volume. A linear pot used as a volume control would give large apparent changes in loudness at low volume settings, with little apparent change over the rest of the control's range.\u003c\/p\u003e \u003cp\u003eOnce you're done prototyping, you can drill a hole into your project box and mount the potentiometer using the included washer and hex nut. \u003ca href=\"https:\/\/thepihut.com\/search?q=t18%20knob\u0026amp;\"\u003eWe've got plenty of matching T18-splined knobs that you can pair up\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003ch5\u003eTechnical details\u003c\/h5\u003e\n      \u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n        \n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\u003cul\u003e\n\u003cli\u003e10K ohm potentiometer, log taper\u003c\/li\u003e\n\u003cli\u003e100,000 Cycle Life\u003c\/li\u003e\n\u003cli\u003e16mm Body\u003c\/li\u003e\n\u003cli\u003eRotational travel: 300°\u003c\/li\u003e\n\u003cli\u003eStatic Stop Strength: 90 oz-in\u003c\/li\u003e\n\u003cli\u003eRotational Torque: 0.5 to 1.25 oz-in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Dimensions: 25.0mm x 24.0mm x 17.0mm \/ 1.0\" x 0.9\" x 0.7\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 6.6g \/ 0.2oz \u003c\/p\u003e \u003cul id=\"product-files\"\u003e\n\u003c\/ul\u003e\n\n      \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":36183748625,"sku":"ADA3391","price":1.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/panel-mount-10k-log-potentiometer-breadboard-friendly-10k-log-the-pi-hut-104103-13717209088062.jpg?v=1646306111"},{"product_id":"ultimate-resistor-kit","title":"575-Piece Ultimate Resistor Kit","description":"\u003cp\u003eOur Ultimate Resistor Kit contains 575 1\/4W metal film resistors of various values in a handy clasp \u003cspan\u003ebox, a great way to ensure you always have the resistor you need to hand!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEach resistor value is packed separately with its ohm value clearly labelled on the outer pouch. We add more of the more commonly used resistors into these kits to make sure your supply lasts at an even rate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDon't worry if you get them mixed up - there's a handy resistor value calculator on the inside of the box along with a list of the included parts.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eKit Contents\u003c\/span\u003e\u003c\/h2\u003e\n\u003ctable width=\"159\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"79\" style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong\u003eRating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"80\" style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e0Ω\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e10Ω\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e20Ω\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e47Ω\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e100Ω\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong\u003e50\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e220Ω\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong\u003e50\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e330Ω\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong\u003e50\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e470Ω\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e1kΩ\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong\u003e50\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e2.2kΩ\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e4.7kΩ\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e10kΩ\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong\u003e50\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e22kΩ\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e47kΩ\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e100kΩ\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e220kΩ\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e470kΩ\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e1MΩ\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOther Kits in the Range\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/200-piece-ultimate-capacitor-kit\" title=\"Ultimate capacitor Kit\"\u003eUltimate Capacitor Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/180-piece-ultimate-tactile-button-kit\" title=\"Ultimate Tactile Button Kit\"\u003eUltimate Tactile Button Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/300-piece-ultimate-solder-sleeve-kit\" title=\"Ultimate Solder Sleeve Kit\"\u003eUltimate Solder Sleeve Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/900-piece-ultimate-crimp-connector-kit\" title=\"Ultimate Crimp Terminal Connector Kit\"\u003eUltimate Crimp Terminal Connector Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/265-piece-ultimate-heat-shrink-kit\" title=\"Ultimate Heat Shrink Kit\"\u003eUltimate Heat Shrink kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/ultimate-resistor-kit\" title=\"Ultimate Resistor Kit\"\u003eUltimate Resistor Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/ultimate-5mm-led-kit\" title=\"Ultimate 5mm LED Kit\"\u003eUltimate 5mm LED Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/ultimate-3mm-led-kit\" title=\"Ultimate 3mm LED Kit\"\u003eUltimate 3mm LED Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":36476117073,"sku":"102328","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/575-piece-ultimate-resistor-kit-the-pi-hut-102328-21908735569.jpg?v=1646762595"},{"product_id":"maker-essentials-leds-resistors","title":"Maker Essentials - LEDs \u0026 Resistors","description":"\u003cp\u003eAdd some light to your project with this selection of over 50 colourful LEDs. They come with current-limiting resistors to protect the element, and allow you to control the brightness.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/maker-essentials\"\u003eMaker Essentials\u003c\/a\u003e are components and useful bits for everyday electronics and tech projects.\u003c\/p\u003e\n\u003ch2\u003eKit contains\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e10mm LEDs\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e1x red\u003c\/li\u003e\n\u003cli\u003e1x green\u003c\/li\u003e\n\u003cli\u003e1x yellow\u003c\/li\u003e\n\u003cli\u003e1x blue\u003c\/li\u003e\n\u003cli\u003e1x white\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e5mm LEDs\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e5x red\u003c\/li\u003e\n\u003cli\u003e5x green\u003c\/li\u003e\n\u003cli\u003e5x yellow\u003c\/li\u003e\n\u003cli\u003e5x blue\u003c\/li\u003e\n\u003cli\u003e5x white\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e3mm LEDs\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e5x red\u003c\/li\u003e\n\u003cli\u003e5x green\u003c\/li\u003e\n\u003cli\u003e5x yellow\u003c\/li\u003e\n\u003cli\u003e5x blue\u003c\/li\u003e\n\u003cli\u003e5x white\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e25x 330? resistors\u003c\/li\u003e\n\u003cli\u003e10x 1k? resistors\u003c\/li\u003e\n\u003cli\u003e10x 10k? resistors\u003c\/li\u003e\n\u003cli\u003e10x 100k? resistors\u003c\/li\u003e\n\u003cli\u003e10x 1M? resistors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":696833343505,"sku":"PIM244","price":6.9,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/maker-essentials-leds-resistors-pimoroni-pim244-508321300497.jpg?v=1646404930"},{"product_id":"maker-essentials-switches-potentiometers","title":"Maker Essentials - Switches \u0026 Potentiometers","description":"\u003cp\u003eEssential for control of your project, this range of variable resistors and switches are ideal for taking control.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/maker-essentials\"\u003eMaker Essentials\u003c\/a\u003e are components and useful bits for everyday electronics and tech projects.\u003c\/p\u003e\n\u003ch2\u003eKit contains\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e5x 3mm tactile switches\u003c\/li\u003e\n\u003cli\u003e5x 6mm tactile switches\u003c\/li\u003e\n\u003cli\u003e5x 12mm tactile switches\u003c\/li\u003e\n\u003cli\u003e5x circular caps for 12mm tactile switches\u003c\/li\u003e\n\u003cli\u003e5x square caps for 12mm tactile switches\u003c\/li\u003e\n\u003cli\u003e1x 1k? rotary potentiometer\u003c\/li\u003e\n\u003cli\u003e1x 10k? rotary potentiometer\u003c\/li\u003e\n\u003cli\u003e1x 100k? rotary potentiometer\u003c\/li\u003e\n\u003cli\u003e3x potentiometer knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":696834097169,"sku":"PIM248","price":9.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/maker-essentials-switches-potentiometers-pimoroni-pim248-508321890321.jpg?v=1646404754"},{"product_id":"panel-mount-10k-dual-linear-potentiometer-w-on-off-switch","title":"Panel Mount 10K Dual Linear Potentiometer w\/ On-Off Switch (10K Dual Linear w\/ Switch)","description":"\u003cp\u003eThis \u003cstrong\u003ePanel Mount 10K Dual Linear Potentiometer w\/ On-Off Switch\u003c\/strong\u003e is a two-in-one, you get a dual-ganged potentiometer \u003cem\u003ean\u003c\/em\u003e\u003cem\u003ed \u003c\/em\u003ean on-off switch. For the potentiometer-half, you've got a dual standard linear-taper 10Kohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. It also comes equipped with an on\/off switch at the beginning of the shaft's rotation, the switch is open when twisted all the way to the left.\u003c\/p\u003e\n\u003cp\u003eUnlike many of our other potentiometers, this one is \u003cem\u003enot\u003c\/em\u003e breadboard-friendly. The pins are about 0.15\" apart, and the rows are close together so you'd short the switch to the potentiometer. Thus, we suggest soldering wires to the pins as necessary, or designing a custom PCB.\u003c\/p\u003e\n\u003cp\u003eOnce you're done prototyping, you can drill a hole into your project box and mount the potentiometer using the included washer and hex nut. \u003ca href=\"https:\/\/thepihut.com\/search?q=t18%20knob\u0026amp;\"\u003eWe've got plenty of matching T18-splined knobs that you can pair up\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e10K ohm potentiometer, linear taper\u003c\/li\u003e\n\u003cli\u003e100,000 Cycle Life\u003c\/li\u003e\n\u003cli\u003e16mm Body\u003c\/li\u003e\n\u003cli\u003eRotational travel: 300°\u003c\/li\u003e\n\u003cli\u003eStatic Stop Strength: 90 oz-in\u003c\/li\u003e\n\u003cli\u003eRotational Torque: 0.5 to 1.25 oz-in\u003c\/li\u003e\n\u003cli\u003eProduct Dimensions: 32.0mm x 20.0mm x 14.0mm \/ 1.3\" x 0.8\" x 0.6\"\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 7.6g \/ 0.3oz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":12364065505342,"sku":"104376","price":1.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/panel-mount-10k-dual-linear-potentiometer-w-on-off-switch-10k-dual-linear-w-switch-the-pi-hut-104376-28609334804675.jpg?v=1646306283"},{"product_id":"panel-mount-right-angle-10k-linear-potentiometer-w-on-off-switch","title":"Panel Mount Right Angle 10K Linear Potentiometer w\/On-Off Switch (10K Linear w\/ Switch)","description":"\u003cp\u003eThis \u003cstrong\u003ePanel Mount Right Angle 10K Linear Potentiometer w\/ On-Off Switch\u003c\/strong\u003e is a two-in-one, with both a breadboard-friendly potentiometer \u003cem\u003eand\u003c\/em\u003e a switch. For the potentiometer-half, you've got a standard linear taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. It also comes equipped with an on\/off switch at the beginning of the shaft's rotation. We like this one because the right-angle legs are 0.2\" apart with pin-points, so you can plug it into a breadboard or perfboard. To use the switch, you'll need to solder to the two tabs in the back.\u003c\/p\u003e\u003cp\u003eOnce you're done prototyping, you can drill a hole into your project box and mount the potentiometer using the included washer and hex nut. \u003ca href=\"https:\/\/thepihut.com\/search?q=t18%20knob\u0026amp;\"\u003eWe've got plenty of matching T18-splined knobs that you can pair up\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cul\u003e\n\u003cli\u003e10K ohm potentiometer, linear taper\u003c\/li\u003e\n\u003cli\u003e100,000 Cycle Life\u003c\/li\u003e\n\u003cli\u003e16mm Body\u003c\/li\u003e\n\u003cli\u003eRotational travel: 300°\u003c\/li\u003e\n\u003cli\u003eStatic Stop Strength: 90 oz-in\u003c\/li\u003e\n\u003cli\u003eRotational Torque: 0.5 to 1.25 oz-in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Dimensions: 31.0mm x 25.5mm x 17.5mm \/ 1.2\" x 1.0\" x 0.7\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 7.9g \/ 0.3oz \u003c\/p\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":12364065538110,"sku":"105654","price":1.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/panel-mount-right-angle-10k-linear-potentiometer-w-on-off-switch-10k-linear-w-switch-the-pi-hut-ada3395-28609326874819.jpg?v=1646304494"},{"product_id":"panel-mount-10k-log-potentiometer-w-on-off-switch","title":"Panel Mount 10K Log Potentiometer w\/ On-Off Switch (10K Log w\/ Switch)","description":"\u003cp\u003eThis potentiometer is a two-in-one: it's a \u003cstrong\u003elog taper 10K ohm potentiometer\u003c\/strong\u003e, with a grippy shaft \u003cem\u003ean\u003c\/em\u003e\u003cem\u003ed\u003c\/em\u003e it comes with an \u003cstrong\u003eon-off switch\u003c\/strong\u003e. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2\" apart with pin-points, so you can plug it into a perfboard. Note the spacing on the switch\/pot pins is 0.2\" so it wont work in a solderless breadboard as nicely, unless you bend the switch pins out of the way. Once you're done prototyping, you can drill a hole into your project box and mount the potentiometer that way.\u003c\/p\u003e\u003cp\u003ePotentiometers, or \"pots\" to electronics enthusiasts, are differentiated by how quickly their resistance changes. In linear pots, the amount of resistance changes in a direct pattern. If you turn or slide it halfway, its resistance will be halfway between its minimum and maximum settings. That's ideal for controlling lights or a fan, but not necessarily for audio controls.\u003c\/p\u003e\u003cp\u003eVolume controls have to cater to the human ear, which isn't linear. Instead, \u003cstrong\u003elogarithmic pots\u003c\/strong\u003e like this one increase their resistance on a curve. At the halfway point volume will still be moderate, but it will increase sharply as you keep turning up the volume. This corresponds to how the human ear hears. Using a log pot therefore gives the effect that a setting of full volume on the control sounds twice as loud as a setting of half volume. A linear pot used as a volume control would give large apparent changes in loudness at low volume settings, with little apparent change over the rest of the control's range.\u003c\/p\u003e\u003cp\u003eThe built-in switch makes it perfect for audio projects where you want to control both power and volume of a monophonic signal.\u003c\/p\u003e\u003cp\u003eOnce you're done prototyping, you can drill a hole into your project box and mount the potentiometer using the included washer and hex nut. \u003ca href=\"https:\/\/thepihut.com\/search?q=t18%20knob\u0026amp;\"\u003eWe've got plenty of matching T18-splined knobs that you can pair up\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cul\u003e\n\u003cli\u003e10K ohm potentiometer, log taper\u003c\/li\u003e\n\u003cli\u003e100,000 Cycle Life\u003c\/li\u003e\n\u003cli\u003e16mm Body\u003c\/li\u003e\n\u003cli\u003eRotational travel: 300°\u003c\/li\u003e\n\u003cli\u003eStatic Stop Strength: 90 oz-in\u003c\/li\u003e\n\u003cli\u003eRotational Torque: 0.5 to 1.25 oz-in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Dimensions: 26.0mm x 25.0mm x 17.5mm \/ 1.0\" x 1.0\" x 0.7\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 7.8g \/ 0.3oz \u003c\/p\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":12364068585534,"sku":"ADA3481","price":1.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/panel-mount-10k-log-potentiometer-w-on-off-switch-10k-log-w-switch-the-pi-hut-ada3481-28609327497411.jpg?v=1646370373"},{"product_id":"panel-mount-10k-dual-log-potentiometer-w-on-off-switch","title":"Panel Mount 10K Dual Log Potentiometer w\/ On-Off Switch (10K Dual Log w Switch)","description":"\u003cp\u003eThis \u003cstrong\u003ePanel Mount 10K Dual Logarithmic Potentiometer w\/ On-Off Switch\u003c\/strong\u003e is a two-in-one; you get a dual-ganged potentiometer \u003cem\u003ean\u003c\/em\u003e\u003cem\u003ed \u003c\/em\u003ean on-off switch. For the potentiometer-half, you've got a dual standard log-taper 10Kohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. It also comes equipped with an on\/off switch at the beginning of the shaft's rotation.\u003c\/p\u003e\u003cp\u003ePotentiometers, or \"pots\" to electronics enthusiasts, are differentiated by how quickly their resistance changes. In linear pots, the amount of resistance changes in a direct pattern. If you turn or slide it halfway, its resistance will be halfway between its minimum and maximum settings. That's ideal for controlling lights or a fan, but not necessarily for audio controls.\u003c\/p\u003e\u003cp\u003eVolume controls have to cater to the human ear, which isn't linear. Instead, \u003cstrong\u003elogarithmic pots\u003c\/strong\u003e like this one increase their resistance on a curve. At the halfway point volume will still be moderate, but it will increase sharply as you keep turning up the volume. This corresponds to how the human ear hears. Using a log pot therefore gives the effect that a setting of full volume on the control sounds twice as loud as a setting of half volume. A linear pot used as a volume control would give large apparent changes in loudness at low volume settings, with little apparent change over the rest of the control's range.\u003c\/p\u003e\u003cp\u003eUnlike many of our other potentiometers, this one is \u003cem\u003enot\u003c\/em\u003e breadboard-friendly. The pins are about 0.15\" apart, and the rows are close together so you'd short the switch to the potentiometer. Thus, we suggest soldering wires to the pins as necessary, or designing a custom PCB.\u003c\/p\u003e\u003cp\u003eThe built-in switch makes it perfect for audio projects where you want to control both power and volume of a stereo signal.\u003c\/p\u003e\u003cp\u003eOnce you're done prototyping, you can drill a hole into your project box and mount the potentiometer using the included washer and hex nut. \u003ca href=\"https:\/\/thepihut.com\/search?q=t18%20knob\u0026amp;\"\u003eWe've got plenty of matching T18-splined knobs that you can pair up\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cul\u003e\n\u003cli\u003e10K ohm potentiometer, linear taper\u003c\/li\u003e\n\u003cli\u003e100,000 Cycle Life\u003c\/li\u003e\n\u003cli\u003e16mm Body\u003c\/li\u003e\n\u003cli\u003eRotational travel: 300°\u003c\/li\u003e\n\u003cli\u003eStatic Stop Strength: 90 oz-in\u003c\/li\u003e\n\u003cli\u003eRotational Torque: 0.5 to 1.25 oz-in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Dimensions: 32.0mm x 20.0mm x 13.0mm \/ 1.3\" x 0.8\" x 0.5\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 7.6g \/ 0.3oz \u003c\/p\u003e\n\u003cul id=\"product-files\"\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/3482\/3482_C5319%20datasheet.jpg\"\u003eDatasheet\u003c\/a\u003e \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":12364068618302,"sku":"104377","price":1.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/panel-mount-10k-dual-log-potentiometer-w-on-off-switch-10k-dual-log-w-switch-the-pi-hut-104377-28609367736515.jpg?v=1646306102"},{"product_id":"potentiometer-with-built-in-knob-10k-ohm","title":"Potentiometer with Built In Knob - 10K ohm","description":"\u003cp\u003e\u003cem\u003eOh say can you see\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eBy the knob's early light...\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eSorry - we thought that was clever.  And while it wasn't really, this potentiometer definitely is! We've seen these in miniature synthesizers. They're bigger than a trim-pot, but smaller than a chunky potentiometer. Best of all \u003cstrong\u003eno knob required!\u003c\/strong\u003e These have a knurled plastic grip with a white stripe marking. Use it as-is, for a low cost adjustment\u003c\/p\u003e\u003cp\u003eComes as a standard 10K ohm linear potentiometer with 0.1\" spacing it works great for breadboarding and prototyping. It has a nice feel, tweaking it is \u003cem\u003equite\u003c\/em\u003e satisfying.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\n\u003cli\u003eDiameter of knob: 6mm \u003c\/li\u003e\n\u003cli\u003eKnob height: 12mm\u003c\/li\u003e\n\u003cli\u003eOverall height: 23.5mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.6g\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/4133\/4133.jpg\"\u003eDiagram\u003c\/a\u003e \u003c\/li\u003e\n\u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":19932893839422,"sku":"ADA4133","price":1.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/potentiometer-with-built-in-knob-10k-ohm-the-pi-hut-ada4133-28609286963395.jpg?v=1646378478"},{"product_id":"slide-potentiometer-with-knob-75mm-long-10k","title":"Slide Potentiometer with Knob - 75mm Long - 10KΩ","description":"\u003cp\u003e\u003cem\u003eSlip slidin' away \u003cbr\u003eSlip slidin' away \u003cbr\u003eYou know the nearer your resistance \u003cbr\u003eThe more you're slip slidin' away\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eIf you're tired of the regular-old-twisty potentiometers we carry, why not \u003cem\u003eslide\u003c\/em\u003e over and try this slide pot? Most famously used on mixers and the transporter control panel on Star Trek, these slide pots are not too long at only 75mm. Use as a voltage divider and you can visually gauge the voltage from low to high. Best of all, \u003cstrong\u003eit comes with a knob!\u003c\/strong\u003e These have a grippy plastic knob with a white stripe marking. \u003c\/p\u003e\u003cp\u003eComes as a standard 10K ohm linear potentiometer, and it works great for breadboarding and prototyping. You can solder to the 3 legs or sorta push it into a solderless breadboard (or a perfboard with large holes).\u003c\/p\u003e\u003cp\u003eIt has a nice feel, sliding it back and forth is \u003cem\u003equite\u003c\/em\u003e satisfying.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cul\u003e\n\u003cli\u003eDimensions:\u003cul\u003e\n\u003cli\u003eOverall length: 75mm\u003c\/li\u003e\n\u003cli\u003eWidth: 9.5mm\u003c\/li\u003e\n\u003cli\u003eHeight: 6.5mm\u003c\/li\u003e\n\u003cli\u003eShank length: 15mm\u003c\/li\u003e\n\u003cli\u003eShank width: 4mm\u003c\/li\u003e\n\u003cli\u003eNub dimensions: 11.2 x 7 x 9.3mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eResistance: 10KΩ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":19932933521470,"sku":"ADA4219","price":2.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/slide-potentiometer-with-knob-75mm-long-10k-the-pi-hut-ada4219-28609449820355.jpg?v=1646906238"},{"product_id":"slide-potentiometer-with-plastic-knob-35mm-long-10k","title":"Slide Potentiometer with Plastic Knob - 35mm Long - 10KΩ","description":"\u003cp\u003e\u003cem\u003eSlip slidin' away \u003cbr\u003eSlip slidin' away \u003cbr\u003eYou know the nearer your resistance \u003cbr\u003eThe more you're slip slidin' away\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eIf you're tired of the regular-old-twisty potentiometers we carry, why not \u003cem\u003eslide\u003c\/em\u003e over and try this slide pot? Most famously used on mixers and the transporter control panel on Star Trek, these slide pots are so cute and short at only 35mm. Use as a voltage divider, and you can visually gauge the voltage from low to high. Comes with a grippy plastic knob! \u003c\/p\u003e\u003cp\u003eComes as a standard 10K ohm linear potentiometer, and it works great for breadboarding and prototyping. You can solder to the 3 legs or sorta push it into a solderless breadboard (or a perfboard with large holes).\u003c\/p\u003e\u003cp\u003eIt has a nice feel, sliding it back and forth is \u003cem\u003equite\u003c\/em\u003e satisfying.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cul\u003e\n\u003cli\u003eDimensions:\u003cul\u003e\n\u003cli\u003eOverall length: 35mm\u003c\/li\u003e\n\u003cli\u003eWidth: 10mm\u003c\/li\u003e\n\u003cli\u003eHeight: 10.2mm\u003c\/li\u003e\n\u003cli\u003eShank length: 9.3mm\u003c\/li\u003e\n\u003cli\u003eShank width: 4.8mm\u003c\/li\u003e\n\u003cli\u003eNub dimensions: 11.7 x 10.3 x 6.9mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eResistance: 10KΩ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":30679067164734,"sku":"ADA4271","price":1.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/slide-potentiometer-with-plastic-knob-35mm-long-10k-the-pi-hut-ada4271-28609353875651.jpg?v=1646189291"},{"product_id":"slide-potentiometer-with-plastic-knob-45mm-long","title":"Slide Potentiometer with Plastic Knob - 45mm Long (10KΩ)","description":"\u003cp\u003e\u003cem\u003eSlip slidin' away \u003cbr\u003eSlip slidin' away \u003cbr\u003eYou know the nearer your resistance \u003cbr\u003eThe more you're slip slidin' away\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eIf you're tired of the regular-old-twisty potentiometers we carry, why not \u003cem\u003eslide\u003c\/em\u003e over and try this slide pot? Most famously used on mixers and the transporter control panel on Star Trek, these slide pots are not too long at only 45mm. Use as a voltage divider and you can visually gauge the voltage from low to high. There's a center indentation so you know when you're in the middle. Best of all, \u003cstrong\u003eit comes with a knob (e.g. nubbin)!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eComes as a standard 10K ohm linear potentiometer, and it works great for breadboarding and prototyping. You can solder to the 3 legs or sorta push it into a solderless breadboard (or a perfboard with large holes).\u003c\/p\u003e\n\u003cp\u003eIt has a nice feel, sliding it back and forth is \u003cem\u003equite\u003c\/em\u003e satisfying.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/4272\/4272_C13403.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eDimensions:\n\u003cul\u003e\n\u003cli\u003eOverall length: 45mm\u003c\/li\u003e\n\u003cli\u003eWidth: 9.5mm\u003c\/li\u003e\n\u003cli\u003eHeight: 26mm\u003c\/li\u003e\n\u003cli\u003eShank length: 10mm\u003c\/li\u003e\n\u003cli\u003eShank width: 5mm\u003c\/li\u003e\n\u003cli\u003eNub dimensions: 10.3 x 11.7 x 6.8mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eResistance: 10KΩ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":30679067197502,"sku":"ADA4272","price":1.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/slide-potentiometer-with-plastic-knob-45mm-long-10k-the-pi-hut-ada4272-28609355120835.jpg?v=1646189112"},{"product_id":"adafruit-ds3502-i2c-digital-10k-potentiometer-breakout-ada4286","title":"Adafruit DS3502 I2C Digital 10K Potentiometer Breakout (STEMMA QT \/ Qwiic)","description":"\u003cp\u003eIf you're a person like me that gets exhausted turning knobs all day, the DS3502 is just the ticket to calm all your knob-turning related troubles. Instead of having to \u003cem\u003eturn knobs \u003c\/em\u003ewith your \u003cem\u003eHANDS \u003c\/em\u003elike an \u003cem\u003eANIMAL, \u003c\/em\u003ethe DS3502 I2C Digital Potentiometer allows you to let your microcontroller adjust the resistance for you! Now you can free your hands to spin your fidget spinner or eat a slice of pizza while you're on the phone. Talking over an I2C bus, your Arduino, CircuitPython board,  or Python powered computer can talk to the DS3502 and tell it to vary its resistance at your beck and call.\u003c\/p\u003e\u003cp\u003eWorking with the DS3502 is easy as an I2C controllable pie. We've put it on a breakout PCB with the required support circuitry and SparkFun qwiic compatible \u003ca target=\"_blank\" rel=\"noopener\" href=\"https:\/\/learn.adafruit.com\/introducing-adafruit-stemma-qt\"\u003e\u003cstrong\u003eSTEMMA QT\u003c\/strong\u003e\u003c\/a\u003e connectors to allow you to use it with other similarly equipped boards \u003cstrong\u003ewithout needing to solder.\u003c\/strong\u003e \u003ca href=\"https:\/\/thepihut.com\/search?q=stemma+qt+cable\u0026amp;sort=BestMatch\"\u003e\u003cstrong\u003eQT Cable is not included\u003c\/strong\u003e, but we have a variety in the shop\u003c\/a\u003e. \u003c\/p\u003e\u003cp\u003eThis handy little helper can work with 3.3V or 5V micros, so it's ready to get to work with a range of development boards. The DS3502 is a simple chip that does one thing well and so it's very easy to work with. Wire it up and set the value for the wiper, that's it. \u003ca href=\"https:\/\/learn.adafruit.com\/ds3502-i2c-potentiometer\/\"\u003eTo make things \u003cem\u003eeven easier\u003c\/em\u003e we've gone and written Arduino and CircuitPython\/Python 3 drivers to simplify interfacing with your new knob-replacing friend.\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\"OK, this thing sounds great. Give me some details\" you say. OK then, here you go: The wiper value is a 7-bit number meaning there are \u003cstrong\u003e128\u003c\/strong\u003e possible levels of resistance to choose from \u003cstrong\u003e0-10K ohms\u003c\/strong\u003e. You can even set a default value that will be set on power up. The analog voltage controlled can be from \u003cstrong\u003e4.5-15.5V.\u003c\/strong\u003e Additionally you can use the address jumpers or pins to set the I2C address to one of four values, allowing you to have four DS3502s on the same I2C bus.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/ds3502-i2c-potentiometer\/\"\u003eDiagrams, libraries, code examples, datasheets, and more are all in the learning tutorial\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eProduct Dimensions: 25.4mm x 17.7mm x 4.6mm \/ 1.0\" x 0.7\" x 0.2\" \u003c\/p\u003e\n\u003cp\u003eProduct Weight: 1.6g \/ 0.1oz \u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":30679068540990,"sku":"ADA4286","price":4.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/adafruit-ds3502-i2c-digital-10k-potentiometer-breakout-stemma-qt-qwiic-adafruit-ada4286-28609623556291.jpg?v=1646723344"},{"product_id":"through-hole-resistors-100-ohm-5-1-4w-pack-of-25","title":"Through-Hole Resistors - 100 ohm 5% 1\/4W - Pack of 25","description":"\u003cp\u003eΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!\u003c\/p\u003e\u003cp\u003eThis is a \u003cstrong\u003e25 Pack of 100Ω Resistors. \u003c\/strong\u003eMore specifically, they are \u003cstrong\u003ecarbon film\u003c\/strong\u003e, through-hole \u003cstrong\u003eaxial\u003c\/strong\u003e type, with \u003cstrong\u003e1\/4 Watt\u003c\/strong\u003e max dissipation, \u003cstrong\u003e300V\u003c\/strong\u003e max voltage, \u003cstrong\u003e5%\u003c\/strong\u003e precision resistors. Whew! These are super common and great for use in any kit, breadboard, perf-board, or other project. We got ones with 0.4mm thick wires so they plug in nicely into solder-less breadboards.\u003c\/p\u003e\u003cp\u003eWe have a slew of different resistor packs with different ohms of resistance; check them all out here!\u003c\/p\u003e\u003cp\u003eAlso be sure to download our game app, \u003cstrong\u003eMho's Resistance\u003c\/strong\u003e! It's the most fun you can have learning resistor values! Available on the App store for iOS and the Play Store for Android!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/adafruit.com\/images\/product-files\/2780\/Resistor_Data_Sheet.pdf\"\u003eResistor Datasheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":31201852063806,"sku":"104229","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/through-hole-resistors-100-ohm-5-1-4w-pack-of-25-the-pi-hut-104229-28609275232451.jpg?v=1646127742"},{"product_id":"through-hole-resistors-1-0k-ohm-5-1-4w-pack-of-25","title":"Through-Hole Resistors - 1.0K ohm 5% 1\/4W - Pack of 25","description":"\u003cp\u003eΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!\u003c\/p\u003e\u003cp\u003eThis is a \u003cstrong\u003e25 Pack of 1.0KΩ Resistors. \u003c\/strong\u003eMore specifically, they are \u003cstrong\u003ecarbon film\u003c\/strong\u003e, through-hole \u003cstrong\u003eaxial\u003c\/strong\u003e type, with \u003cstrong\u003e1\/4 Watt\u003c\/strong\u003e max dissipation, \u003cstrong\u003e300V\u003c\/strong\u003e max voltage, \u003cstrong\u003e5%\u003c\/strong\u003e precision resistors. Whew! These are super common and great for use in any kit, breadboard, perf-board, or other project. We got ones with 0.4mm thick wires so they plug in nicely into solder-less breadboards.\u003c\/p\u003e\u003cp\u003eWe have a slew of different resistor packs with different ohms of resistance; check them all out here!\u003c\/p\u003e\u003cp\u003eAlso be sure to download our game app, \u003cstrong\u003eMho's Resistance\u003c\/strong\u003e! It's the most fun you can have learning resistor values! Available on the App store for iOS and the Play Store for Android!\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/adafruit.com\/images\/product-files\/2780\/Resistor_Data_Sheet.pdf\"\u003eResistor Datasheet\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":31368481308734,"sku":"104230","price":0.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/through-hole-resistors-1-0k-ohm-5-1-4w-pack-of-25-the-pi-hut-104230-28609274413251.jpg?v=1646127557"},{"product_id":"adafruit-ds1841-i2c-digital-10k-potentiometer-breakout","title":"Adafruit DS1841 I2C Digital 10K Potentiometer Breakout (STEMMA QT \/ Qwiic)","description":"\u003cp\u003ePotentiometers are the perfect tool when you want to change your circuit by turning a knob. Turns out, there are times when you want to adjust your circuit without manually turning a knob, and the\u003cstrong\u003e DS1841 I2C Logarithmic Resistor from Maxim\u003c\/strong\u003e can do just that. It's a programmable resistor, similar to an I2C potentiometer like the \u003ca title=\"DS3502 I2C Potentiometer\" href=\"https:\/\/thepihut.com\/products\/adafruit-ds3502-i2c-digital-10k-potentiometer-breakout-ada4286\" target=\"_blank\"\u003e\u003cstrong\u003eDS3502 I2C Potentiometer\u003c\/strong\u003e\u003c\/a\u003e, so why another?\u003c\/p\u003e\n\u003cp\u003eThe big difference between the two is how the resistance changes in relation to changes made to the wiper. The DS3502's resistance has a \u003cem\u003elinear\u003c\/em\u003e relationship to the wiper's setting. Each time you change the wiper by a given amount, the resistance will change by the same amount. With the DS1841, the relationship between resistance and the wiper setting is \u003cstrong\u003elogarithmic\u003c\/strong\u003e. This means that as the wiper setting changes, the amount of resistance will depend on where the current setting is in the wiper's range.\u003c\/p\u003e\n\u003cp\u003eLog potentiometers are used in audio applications for things like volume control because they better match the response of human ear to sound.\u003c\/p\u003e\n\u003cp\u003eThe DS1841's resistance ranges from \u003cstrong\u003e22kOhms to 3.7 kOhms\u003c\/strong\u003e and has\u003cstrong\u003e 128 tap points\u003c\/strong\u003e. Even more interestingly, the DS1841 can be configured to \u003cstrong\u003eadjust its resistance based on temperature\u003c\/strong\u003e with hysteresis to keep things from jumping around.\u003c\/p\u003e\n\u003cp\u003eAdditionally, the temperature compensation can be adjusted by using the \u003cstrong\u003eLUT\u003c\/strong\u003e (\u003cstrong\u003eL\u003c\/strong\u003eook \u003cstrong\u003eU\u003c\/strong\u003ep \u003cstrong\u003eT\u003c\/strong\u003eable) built into the DS1841. This table allows you to specify the wiper setting for each of 70 temperature increments between -39 and 100 degrees C, plus one each for above or below that range. You can even manually set the wiper to one of the entries in the LUT.\u003c\/p\u003e\n\u003cp\u003eWorking with the DS1841 is easy. We've put it on a breakout PCB with the required support circuitry and SparkFun qwiic compatible \u003ca href=\"https:\/\/learn.adafruit.com\/introducing-adafruit-stemma-qt\" target=\"_blank\"\u003e\u003cstrong\u003eSTEMMA QT\u003c\/strong\u003e\u003c\/a\u003e connectors to allow you to use it with other similarly equipped boards \u003cstrong\u003ewithout needing to solder.\u003c\/strong\u003e \u003ca href=\"https:\/\/thepihut.com\/search?q=stemma+qt+cable\u0026amp;sort=BestMatch\"\u003e\u003cstrong\u003eQT Cable is not included\u003c\/strong\u003e, but we have a variety in the shop\u003c\/a\u003e. This handy little helper can work with 3.3V or 5V micros, so it's ready to get to work with a range of development boards. To make things even easier we've gone and written Arduino and CircuitPython\/Python 3 drivers to simplify interfacing with your new knob-replacing friend.\u003c\/p\u003e\n\u003cp\u003eFancy as they are, breakouts alone won’t get you far, \u003cstrong\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-ds1841-i2c-logarithmic-resistor\/overview\"\u003eso we’ve written libraries for CircuitPython and Arduino along with example code to make them simple to use.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 25.5mm x 17.6mm x 4.6mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":32231175815230,"sku":"ADA4570","price":7.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/adafruit-ds1841-i2c-digital-10k-potentiometer-breakout-stemma-qt-qwiic-adafruit-ada4570-28609718714563.jpg?v=1646723708"},{"product_id":"resistor-packs","title":"Resistor Packs (1\/4 Watt, ±1%)","description":"\u003cp\u003eIf you need a specific value resistor for your project, our handy resistor packs are the perfect addition to your basket.\u003c\/p\u003e\n\u003cp\u003eAvailable in a range of values from 0Ω all the way up to 1MΩ, \u003cstrong\u003ethese sets come in 25 or 50-piece packs. We made the more popular values into 50 packs \u003c\/strong\u003eas you're likely to need lots of these!\u003c\/p\u003e\n\u003cp\u003eThese resistors are \u003cstrong\u003e1\/4 Watt metal film with a ±1% tolerance\u003c\/strong\u003e and come in a grip-seal bag. \u003ca href=\"\/products\/resistor-packs-1-2-watt-1\"\u003eWe also stock chunkier 1\/2W resistor packs\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eValues available (select above before adding to basket):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e25x 0 Ω\u003c\/li\u003e\n\u003cli\u003e25x 10 Ω\u003c\/li\u003e\n\u003cli\u003e25x 20 Ω\u003c\/li\u003e\n\u003cli\u003e25x 47 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50x\u003c\/strong\u003e 100 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50x\u003c\/strong\u003e 220 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50x\u003c\/strong\u003e 330 Ω\u003c\/li\u003e\n\u003cli\u003e25x 470 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50x\u003c\/strong\u003e 1k Ω\u003c\/li\u003e\n\u003cli\u003e25x 2.2k Ω\u003c\/li\u003e\n\u003cli\u003e25x 4.7k Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50x\u003c\/strong\u003e 10k Ω\u003c\/li\u003e\n\u003cli\u003e25x 22k Ω\u003c\/li\u003e\n\u003cli\u003e25x 47k Ω\u003c\/li\u003e\n\u003cli\u003e25x 100k Ω\u003c\/li\u003e\n\u003cli\u003e25x 220k Ω\u003c\/li\u003e\n\u003cli\u003e25x 470k Ω\u003c\/li\u003e\n\u003cli\u003e25x 1M Ω\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Pi Hut","offers":[{"title":"0Ω","offer_id":37986550448323,"sku":"103246","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"10Ω","offer_id":37986550481091,"sku":"103247","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"20Ω","offer_id":37986550513859,"sku":"103248","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"47Ω","offer_id":37986550546627,"sku":"103249","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"100Ω","offer_id":37986550579395,"sku":"103259","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"220Ω","offer_id":37986550612163,"sku":"103260","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"330Ω","offer_id":37986550644931,"sku":"103261","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"470Ω","offer_id":37986550677699,"sku":"103250","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"1KΩ","offer_id":37986550710467,"sku":"103262","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"2.2KΩ","offer_id":37986550743235,"sku":"103251","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"4.7KΩ","offer_id":37986550776003,"sku":"103252","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"10KΩ","offer_id":37986550808771,"sku":"103263","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"22KΩ","offer_id":37986550841539,"sku":"103253","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"47KΩ","offer_id":37986550874307,"sku":"103254","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"100KΩ","offer_id":37986550907075,"sku":"103255","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"220KΩ","offer_id":37986550939843,"sku":"103256","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"470KΩ","offer_id":37986550972611,"sku":"103257","price":1.0,"currency_code":"GBP","in_stock":true},{"title":"1MΩ","offer_id":37986551005379,"sku":"103258","price":1.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/resistor-packs-the-pi-hut-23250396610755.jpg?v=1646225117"},{"product_id":"fermion-dual-digital-potentiometer-100k-breakout","title":"Fermion: Dual Digital Potentiometer - 100K (Breakout)","description":"\u003cdiv class=\"desc\"\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cp style=\"text-align: justify;\"\u003eDigital potentiometers are also called \"Digital Pots\" in short. It is a kind of mixed-signal IC, which is able to dynamically change the internal resistors through MCU like Arduino. It can be applied to applications such as LED DC dimming, linear stable voltage source, oscillator, low pass filter or differential amplifier.\u003cbr\u003e\u003cbr\u003e This breakout employs MCP42100 internally manufactured with two individual 100K digital pot. It features small dimension and low power consumption.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eWith our tutorial and sample code provided, you can quickly apply this module to your project. Compared to the traditional mechanical potentiometer, the digital pot features as flexible (program control), small size (ICs) and high reliability (without mechanical parts). It can replace the traditional option in many applications. Digital pot is usually used to change the sound volume in audio devices, such as smart loudspeaker, cell phone, and music player. \u003cbr\u003e\u003cbr\u003e In addition, with a proper design op-amp circuit, the digital pot can also be applied to change some key parameters of the circuit dynamically, such as LED DC dimming (output current), a linear stable voltage source (output voltage), oscillator (frequency and amplitude), low pass filter (bandwidth) and differential amplifier (gain).\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis breakout employs MCP42100 internally manufactured with two individual 100K digital pot POT0 and POT1. Each pot has 256 taps with a resistor of 100KΩ. It supports a wide voltage supply (DC 2.7V - 5.5V) compatible with MCU of 3.3V and 5V.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe breakout features as small size (20.0mm*18.0mm) and reserves the SO pin for multiple breakouts being configured in daisy-chain connection. If you have a I\/O shield in hand, this breakout can be easily connected to it with the attached 5 pin male to male cable.\u003c\/p\u003e\nTwo triangular waves out of phase can be observed from the oscilloscope. If we zoom in a section of the wave, the triangular wave is actually made up of many steps. Each steps correspond to one wiper position. The width of the step is about 1ms, because the program delay for 1ms between every wiper changes. The upstairs half cycle and the downstairs half cycle consist of 256 steps each, therefore the period of the triangular wave is 256*2=512ms.\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"desCon\"\u003eThe digital pot can quickly change the wiper position and the settling time can up to micro seconds (18μs, typical).\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cli\u003eLow power, small dimension\u003c\/li\u003e\n\u003cli\u003eDual Digital Potentiometer\u003c\/li\u003e\n\u003cli\u003eCompatible with 3.3V or 5.0V power supply\u003c\/li\u003e\n\u003c\/div\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cli\u003eSound volume or tone tuning\u003c\/li\u003e\n\u003cli\u003eLED DC dimmer, contrast control\u003c\/li\u003e\n\u003cli\u003eProgrammable voltage source, filter, differential amplifier\u003c\/li\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cli\u003eSupply Voltage: 2.7～5.5V DC\u003c\/li\u003e\n\u003cli\u003eStatic Operation Current: \u0026lt; 1 μA\u003c\/li\u003e\n\u003cli\u003ePotentiometer Value: 100 KΩ\u003c\/li\u003e\n\u003cli\u003eResolution: 8 bits，256 taps for each potentiometer\u003c\/li\u003e\n\u003cli\u003eNumber of Potentiometers: 2\u003c\/li\u003e\n\u003cli\u003eInterface: SPI\u003c\/li\u003e\n\u003cli\u003eOperation Temperature: -40℃～85℃\u003c\/li\u003e\n\u003cli\u003eDimension: 20.0mm*18.0mm\u003c\/li\u003e\n\u003c\/div\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003ca href=\"https:\/\/www.dfrobot.com\/wiki\/index.php\/Dual_Digital_Pot_(100K)_SKU:_DFR0520\" target=\"_blank\"\u003eProduct wiki\u003c\/a\u003e\u003cbr\u003e \u003ca href=\"https:\/\/www.dfrobot.com\/wiki\/index.php\/Dual_Digital_Pot_(100K)_SKU:_DFR0520#More_Documents\" target=\"_blank\"\u003eMore Documents\u003c\/a\u003e\n\u003c\/div\u003e\n\u003ch2\u003eShipping List\u003c\/h2\u003e\n\u003cdiv class=\"desCon\"\u003e\n\u003cli\u003eDual Digital Pot (100K) V1.0 x1\u003c\/li\u003e\n\u003cli\u003e5P male to male cable x1\u003c\/li\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":39750375932099,"sku":"DFR0520","price":10.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/fermion-dual-digital-potentiometer-100k-breakout-dfrobot-dfr0520-28541955342531.jpg?v=1646543717"},{"product_id":"stemma-wired-potentiometer-breakout-board-10k-ohm-linear","title":"STEMMA Wired Potentiometer Breakout Board - 10K ohm Linear","description":"\u003cp\u003eFor the easiest way possible to measure twists, turn to this STEMMA potentiometer breakout (ha!). This plug-n-play pot comes with a JST-PH 2mm connector and a matching \u003ca href=\"https:\/\/thepihut.com\/products\/stemma-jst-ph-3-pin-to-male-header-cable-200mm\"\u003eJST PH 3-Pin to Male Header Cables - 200mm\u003c\/a\u003e, so wiring up is a cinch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: this uses STEMMA, not the smaller STEMMA QT!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSimply plug the cable in, then use the black wire to connect to your ground, white wire to the input\/signal pin and the red wire to your power pin. The power pin voltage should match the voltage max of your analog input. So, if you're using a 5V Arduino or compatible, connect red to 5V. If you're using a 3V Feather board, tie red to 3V.\u003c\/p\u003e\n\u003cp\u003eIf you want to connect to something with \u003ca href=\"https:\/\/thepihut.com\/products\/jst-ph-3-pin-plug-to-color-coded-alligator-clips-cable\"\u003ealligator clips use our STEMMA to Gator cable\u003c\/a\u003e. To connect to something with a \u003ca href=\"https:\/\/thepihut.com\/products\/jst-ph-3-pin-plug-plug-cable-100mm-long\"\u003eSTEMMA 3-pin connector already, use this cable\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003ePCB Dimensions: 28mm x 21mm\u003c\/li\u003e\n\u003cli\u003ePotentiometer (L x W x H): 11.8mm x 10mm x 20mm\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/4493\/4493_diagram1.png\" style=\"font-size: 0.875rem;\"\u003ePCB Diagram\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/4493\/4493_pinout.png\" style=\"font-size: 0.875rem;\"\u003ePinout\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":39817422307523,"sku":"ADA4493","price":3.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/stemma-wired-potentiometer-breakout-board-10k-ohm-linear-the-pi-hut-ada4493-28609555562691.jpg?v=1646139431"},{"product_id":"adafruit-slider-trinkey-usb-neopixel-slide-potentiometer","title":"Adafruit Slider Trinkey - USB NeoPixel Slide Potentiometer","description":"\u003cp\u003eIt's half USB Key, half Adafruit Trinket, half mini slide pot\u003cem\u003e... \u003c\/em\u003eit's \u003cstrong\u003eSlider Trinkey\u003c\/strong\u003e, the circuit board with a Trinket M0 heart, NeoPixel glow, and a 35mm long 10KΩ slide potentiometer. \u003c\/p\u003e \u003cp\u003eThe PCB is designed to slip into any USB A port on a computer or laptop. There's an ATSAMD21 microcontroller on board with just enough circuitry to keep it happy. One pin of the microcontroller connects to the middle of the slide potentiometer as an analog input. Another connects to two NeoPixel LEDs. The third pin can be used as a capacitive touch input. A reset button lets you enter bootloader mode if necessary. That's it!\u003c\/p\u003e \u003cp\u003eThe SAMD21 can run CircuitPython or Arduino very nicely - with existing NeoPixel and our FreeTouch libraries for the capacitive touch input. Over the USB connection, you can have serial, MIDI, or HID connectivity. The Slider Trinkey is perfect for simple projects that can use a few user inputs and colorful output. Maybe you'll set it up as a monitor brightness adjuster, or volume control, or color picker.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note this board DOES come with a pre-soldered slide pot\u003c\/strong\u003e (there's really only one that fits and we happen to stock it) Since we use a PCB with a USB A shape, its possible to accidentally yank the board out if you push the potentiometer all way way out and then \u003cem\u003ekeep pushing out\u003c\/em\u003e. So be kind and careful with your Slider Trinkey! It isnt meant for yanking.\u003c\/p\u003e \u003cp\u003eWe think it's just an adorable little board, small and durable and inexpensive enough that it could be a first microcontroller board, or inspiration for advanced developers to make something simple and fun.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eATSAMD21E18 32-bit Cortex M0+ - 48 MHz 32 bit processor with 256KB Flash and 32 KB RAM\u003c\/li\u003e \u003cli\u003eNative USB supported by every OS - can be used in\u003cstrong\u003e Arduino or CircuitPython \u003c\/strong\u003eas USB serial console, MIDI, Keyboard\/Mouse HID, even a little disk drive for storing Python scripts.\u003c\/li\u003e \u003cli\u003eCan be used with Arduino IDE or CircuitPython\u003c\/li\u003e \u003cli\u003eTwo reverse-mount RGB NeoPixel LEDs\u003c\/li\u003e \u003cli\u003eOne Capacitive Touchpad\u003c\/li\u003e \u003cli\u003eOne 35mm slide potentiometer with nubbin\u003c\/li\u003e \u003cli\u003eReset switch\u003cstrong\u003e \u003c\/strong\u003efor starting your project code over or entering bootloader mode\u003c\/li\u003e \u003cli\u003eCute \u0026amp; keychain-friendly!\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eTechnical Details\u003c\/h2\u003e \u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e \u003cul\u003e \u003cli\u003eProduct Dimensions: 52.0mm x 24.5mm x 12.0mm \/ 2.0\" x 1.0\" x 0.5\"\u003c\/li\u003e \u003cli\u003eProduct Weight: 6.4g \/ 0.2oz\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cul id=\"product-files\"\u003e\u003c\/ul\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":39922897977539,"sku":"ADA5021","price":9.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/adafruit-slider-trinkey-usb-neopixel-slide-potentiometer-adafruit-ada5021-28708832182467.jpg?v=1646686630"},{"product_id":"grove-slide-potentiometer","title":"Grove - Slide Potentiometer","description":"\u003cp\u003eThe Grove Slide Potentiometer is a linear variable resistor with a total resistance of 10k. When you move the lever from one side to the other, its output voltage will range between 0 V to the VCC you apply. Three of four Grove pins are connected to VCC, GND and the ADC IN on the slide, while the remaining pin is connected to a green indicator LED. You can use the indicator LED to visually display the change on the potentiometer.\u003c\/p\u003e\n\u003cp\u003eGrove - Slide Potentiometer is compatible with both Arduino and Raspberry Pi. Please use a \u003ca href=\"\/products\/grove-base-shield-v2-0-for-arduino\"\u003eBase Shield V2\u003c\/a\u003e to connect it with your Arduino boards and use a \u003ca href=\"\/products\/grove-base-hat-for-raspberry-pi\"\u003eBase HAT\u003c\/a\u003e for Raspberry Pi to connect with your Raspberry Pi.\u003c\/p\u003e\n\u003cp\u003eWe also stock the \u003ca href=\"\/products\/grove-rotary-angle-sensor\"\u003eGrove Rotary Angle Sensor (Rotary Potentiometer)\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e30 mm long slide length\u003c\/li\u003e\n\u003cli\u003eLinear resistance taper\u003c\/li\u003e\n\u003cli\u003eGrove compatible\u003c\/li\u003e\n\u003cli\u003eWeight: 13g\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProduct number: Seeed 101020036\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.seeedstudio.com\/Grove-Slide_Potentiometer\/\" target=\"_blank\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Grove - Slide Potentiometer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed","offers":[{"title":"Default Title","offer_id":40843163992259,"sku":"103337","price":6.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/grove-slide-potentiometer-seeed-103337-29950557257923.jpg?v=1646490073"},{"product_id":"grove-rotary-angle-sensor","title":"Grove - Rotary Angle Sensor","description":"\u003cp\u003eA potentiometer (also known as a Potmeter or Pot) consists of a resistive element called the track and a sliding contact called the wiper internally where end terminals are attached to the resistive element.\u003c\/p\u003e\n\u003cp\u003eThe Grove Rotary Angle Sensor produces an analog output between 0 and Vcc on its D1 connector. The D2 connector is not used. The angular range is 300 degrees with a linear change in value. The resistance value is 10k ohms, perfect for Arduino use. This may also be known as a rotary angle sensor.\u003c\/p\u003e\n\u003cp\u003eIt's is compatible with both Arduino and Raspberry Pi. Please use a \u003ca href=\"\/products\/grove-base-shield-v2-0-for-arduino\"\u003eBase Shield V2\u003c\/a\u003e to connect it with your Arduino boards and use a \u003ca href=\"\/products\/grove-base-hat-for-raspberry-pi\"\u003eBase HAT\u003c\/a\u003e to connect with your Raspberry Pi.\u003c\/p\u003e\n\u003cp\u003eWe also stock the \u003ca href=\"\/products\/grove-slide-potentiometer\"\u003eGrove Slide Potentiometer\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e300 degrees range\u003c\/li\u003e\n\u003cli\u003e10k resistance\u003c\/li\u003e\n\u003cli\u003eGrove Compatible\u003c\/li\u003e\n\u003cli\u003eWeight: 10g\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProduct number: Seeed 101020017\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.seeedstudio.com\/Grove-Rotary_Angle_Sensor\/\" target=\"_blank\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Grove Rotary Angle Sensor\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed","offers":[{"title":"Default Title","offer_id":40843241488579,"sku":"103335","price":3.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/grove-rotary-angle-sensor-seeed-103335-29950644289731.jpg?v=1646876174"},{"product_id":"grove-rotary-angle-sensor-p","title":"Grove - Rotary Angle Sensor (P)","description":"\u003cp\u003eThis Grove Rotary Angle Sensor is a sister version of the original \u003ca href=\"\/products\/grove-rotary-angle-sensor\"\u003eGrove Rotary Angle Sensor\u003c\/a\u003e. They are identical except on this version the Grove connecter is moved to the back so that you can easily use it as a neat and wire-free human interface device for panel mounting.\u003c\/p\u003e\n\u003cp\u003eThat's what the 'P' is in the name of this module - P is for 'Panel Mount'!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e300 degrees range\u003c\/li\u003e\n\u003cli\u003e10k resistance\u003c\/li\u003e\n\u003cli\u003eGrove Compatible\u003c\/li\u003e\n\u003cli\u003eWeight: 10g\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProduct number: Seeed 101020048\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Grove Rotary Angle Sensor (P)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.seeedstudio.com\/Grove-Rotary_Angle_Sensor\/\" target=\"_blank\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seeed","offers":[{"title":"Default Title","offer_id":40918591275203,"sku":"103344","price":3.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/grove-rotary-angle-sensor-p-seeed-103344-30031794274499.jpg?v=1646490241"},{"product_id":"adafruit-neoslider-i2c-qt-slide-potentiometer-with-4-neopixels-stemma-qt-qwiic","title":"Adafruit NeoSlider I2C QT Slide Potentiometer with 4 NeoPixels - STEMMA QT \/ Qwiic","description":"\u003cp\u003eOur family of I2C-friendly user interface elements grows by one with this new product that makes it plug-n-play-easy to add a 75mm long slide potentiometer to any microcontroller or microcomputer with an I2C port.\u003c\/p\u003e \u003cp\u003eEach breakout is 3\" long and 0.8\" wide, with a single linear slide pot in the centre. Underneath, there are four under-lighting NeoPixels that can display any RGB colour. In the middle, a small microcontroller takes I2C commands and converts them to analog reads (of the potentiometer) and NeoPixel control. Goes great with our \u003ca href=\"\/products\/adafruit-i2c-qt-rotary-encoder-with-neopixel-stemma-qt-qwiic\"\u003eStemma QT rotary encoder\u003c\/a\u003e and \u003ca href=\"\/products\/neokey-1x4-qt-i2c-four-mechanical-key-switches-with-neopixels\"\u003e1x4 NeoKey QT breakout\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003eThanks to the Stemma QT \/ Qwiic connectors underneath, you can easily connect using QT cables - no soldering required! There are even four I2C selection jumpers that you can cut to change the address from the default 0x30 to any value up to 0x3F so up to 16 slide pots can all share one chained cable.\u003c\/p\u003e \u003cp\u003eTo get you going fast, we spun up a custom-made PCB with the seesaw chip and all supporting circuitry for 3 or 5V power and logic. The \u003ca href=\"https:\/\/learn.adafruit.com\/introducing-adafruit-stemma-qt\/what-is-stemma-qt\"\u003eSTEMMA QT connectors\u003c\/a\u003e on either side are compatible with the SparkFun Qwiic I2C connectors. This allows you to make solderless connections between your development board and the rotary encoder or to chain them with a wide range of other sensors and accessories using a \u003ca href=\"https:\/\/thepihut.com\/search?q=stemma%20qt%20cable\"\u003e\u003cstrong\u003ecompatible cable\u003c\/strong\u003e\u003c\/a\u003e. \u003ca href=\"https:\/\/thepihut.com\/search?q=stemma+qt+cable\u0026amp;sort=BestMatch\"\u003eQT Cable is not included, but we have a variety in the shop\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_Seesaw\"\u003eYou can use our Arduino library to control and read data\u003c\/a\u003e with any compatible microcontroller. \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_CircuitPython_seesaw\"\u003eWe also have CircuitPython\/Python code\u003c\/a\u003e for use with computers or single-board Linux boards.\u003c\/p\u003e \u003ch2\u003eTechnical Details\u003c\/h2\u003e \u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cul\u003e \u003cli\u003eProduct Dimensions: 76.2mm x 29.8mm x 21.5mm \/ 3.0\" x 1.2\" x 0.8\"\u003c\/li\u003e \u003cli\u003eProduct Weight: 13.2g \/ 0.5oz\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-neoslider\"\u003ePrimary Guide: Adafruit NeoSlider\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/neocontroller-color-grading-input-box\"\u003eNeocontroller Color Grading Input Box\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_Seesaw\"\u003eArduino Library\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_CircuitPython_seesaw\"\u003eCircuitPython\/Python code\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":41473874264259,"sku":"ADA5295","price":9.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/adafruit-neoslider-i2c-qt-slide-potentiometer-with-4-neopixels-stemma-qt-qwiic-adafruit-ada5295-32546304000195.jpg?v=1646708776"},{"product_id":"alpha-single-gang-16mm-right-angle-pc-mount-20k-w-ts-tone-rv16af-41-15r1","title":"Alpha Single-Gang 16mm Right-angle PC Mount (20K \"W\" TS Tone - RV16AF-41-15R1)","description":"\u003cp\u003eThis \u003cb\u003eAlpha \u003c\/b\u003e\u003cstrong\u003e20K \"W\" TS Tone \u003c\/strong\u003epotentiometer is a two-in-one, good in a breadboard or with a panel. It's a funky W TS Tone taper 20K ohm potentiometer. A W taper is pretty unique and is reverse audio log up to the midpoint and regular audio log after that, sometimes these are called 'G' taper. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2\" apart with pin-points, so you can plug it into a breadboard or perfboard. \u003c\/p\u003e\n\u003cp\u003eFolks love Alpha pots for their reliability and consistency - and we agree! They make great low-cost, high-quality potentiometers\u003c\/p\u003e\n\u003cp\u003eThis potentiometer has a round (not T18 or flattened) shaft that is nominally 6mm diameter (we measured 6.3mm with our calipers)\u003c\/p\u003e\n\u003cp\u003eOnce you're done prototyping, you can drill a hole into your project box and mount the potentiometer using the included washer and hex nut. \u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-blog.adafruit.com\/uploads\/2022\/01\/Taiwan-Alpha-16mm-pots-datasheet.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Alpha","offers":[{"title":"Default Title","offer_id":41539015377091,"sku":"ADA5257","price":1.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/alpha-single-gang-16mm-right-angle-pc-mount-20k-w-ts-tone-rv16af-41-15r1-the-pi-hut-ada5257-33106462998723.jpg?v=1646665760"},{"product_id":"alpha-single-gang-16mm-right-angle-pc-mount-1m-reverse-audio-rv16af-41-15r1-c1m-30h4","title":"Alpha Single-Gang 16mm Right-angle PC Mount - 1M Reverse Audio (RV16AF-41-15R1-C1M-30H4)","description":"\u003cp\u003eThis \u003cb\u003eAlpha 1M Reverse Audio\u003c\/b\u003e potentiometer is a two-in-one, good in a breadboard or with a panel. It's a unique \u003cstrong\u003ereverse audio taper\u003c\/strong\u003e 1 Megaohm potentiometer. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2\" apart with pin-points, so you can plug it into a breadboard or perfboard. \u003c\/p\u003e\n\u003cp\u003eFolks love Alpha pots for their reliability and consistency - and we agree! They make great low-cost, high-quality potentiometers\u003c\/p\u003e\n\u003cp\u003eThis potentiometer has a round (not T18 or flattened) shaft that is nominally 6mm diameter (we measured 6.3mm with our calipers)\u003c\/p\u003e\n\u003cp\u003eOnce you're done prototyping, you can drill a hole into your project box and mount the potentiometer using the included washer and hex nut. \u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-blog.adafruit.com\/uploads\/2022\/01\/Taiwan-Alpha-16mm-pots-datasheet.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Alpha","offers":[{"title":"Default Title","offer_id":41539016327363,"sku":"ADA5258","price":1.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/alpha-single-gang-16mm-right-angle-pc-mount-1m-reverse-audio-rv16af-41-15r1-c1m-30h4-the-pi-hut-ada5258-33106477678787.jpg?v=1646670782"}],"url":"https:\/\/thepihut.com\/collections\/resistors.oembed?page=2","provider":"The Pi Hut","version":"1.0","type":"link"}