{"title":"Raspberry Pi SSD HATs","description":"\u003cp\u003eThis section contains all of our HATs and add-on boards that allow you to add fast SSD storage to your Raspberry Pi.\u003c\/p\u003e\n\u003cp\u003eSSD storage comes in a few flavours, so make sure you check which type the add-on is compatible with.\u003c\/p\u003e\n\u003cp\u003eThe most common types are SATA or NVMe, with \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"Raspberry Pi SSD\"\u003eNVMe M.2 drives\u003c\/a\u003e more common with HATs designed for the \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e, as they can make use of the PCIe interface for lighting fast transfer rates - such as the official \u003ca href=\"\/products\/raspberry-pi-m2-hat-plus\" title=\"Raspberry Pi M.2 HAT+\"\u003eRaspberry Pi M.2 HAT+\u003c\/a\u003e.\u003c\/p\u003e\n\u003c!----\u003e","products":[{"product_id":"pci-e-to-4-channel-sata-3-0-adapter-for-cm4-io-board","title":"PCI-E to 4-channel SATA 3.0 Adapter for CM4 IO Board","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/products\/raspberry-pi-compute-module-4-io-board\" target=\"_blank\"\u003eCompute Module 4 IO board\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eincludes a 1x PCIe Gen 2.0 slot allowing you to add additional hardware to your\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/products\/raspberry-pi-compute-module-4\" target=\"_blank\"\u003eCM4\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eprojects.\u003c\/p\u003e\n\u003cp\u003eThis PCI-E to 4-channel SATA 3.0 adapter board adds a low latency, low-power AHCI controller to your CM4 IO board, allowing you to build up various high-speed IO systems, including servers, high-capacity system storage or surveillance platforms.\u003c\/p\u003e\n\u003cp\u003eIn addition to the power supply from the PCI-E interface, there's also a power header for an external 5v\/12v input. LED indicators are onboard for each SATA channel, flashing whenever data is read\/written.\u003c\/p\u003e\n\u003ch2\u003eNote\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe module is PCIe Gen 3 interface but the Raspberry Pi CM4 is PCIe Gen 2 interface, therefore \u003cstrong\u003ethe max speed is 5Gbps\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports 5V\/12V SATA Hard Disks. Does not Support the M.2 Interface\u003c\/li\u003e\n\u003cli\u003eDoes not support direct access to a PC motherboard\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStorage, CM4 and IO board are not included\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupports single-channel PCI Express\u003c\/li\u003e\n\u003cli\u003eFour power-saving modes of L0s\/L1\/L23\/L3\u003c\/li\u003e\n\u003cli\u003eSupport L1 sub-state deep power saving mode\u003c\/li\u003e\n\u003cli\u003eSupports SRIS, AER, LTR\u003c\/li\u003e\n\u003cli\u003eSupports SATA LED\u003c\/li\u003e\n\u003cli\u003eSupports NCQ \u0026amp; AHCI SPEC 1.4\u003c\/li\u003e\n\u003cli\u003eFour SATA3.0 (6Gbps) ports\u003c\/li\u003e\n\u003cli\u003eSupports the switching based on the port multiplier commands\u003c\/li\u003e\n\u003cli\u003eSupports SATA Partial\/Dormancy power management\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 82mm x 39mm\u003c\/li\u003e\n\u003cli\u003e4-pin Power Port connector: PH 2.54\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x PCIe-TO-SATA-4P\u003c\/li\u003e\n\u003cli\u003e1x SATA Adapter Cable\u003c\/li\u003e\n\u003cli\u003e1x Screws pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStorage, CM4 and IO board are not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveshare.com\/wiki\/PCIe-TO-SATA-4P\"\u003eProduct Documentation\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":42183548829891,"sku":"WAV-22247","price":19.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/products\/pci-e-to-4-channel-sata-3-0-adapter-for-cm4-io-board-waveshare-wav-22247-39724438814915.jpg?v=1665789271"},{"product_id":"nvme-base-for-raspberry-pi-5-nvme-base","title":"NVMe Base for Raspberry Pi 5","description":"\u003cp\u003eAdd super-fast storage to your Raspberry Pi 5 allowing for lightning-fast boots, NAS use, and snappy applications!\u003c\/p\u003e\n\u003cp\u003eNVMe Base is a PCIe extension board for \u003ca href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e. Simply populate it with an \u003ca title=\"Raspberry Pi SSD\" href=\"\/products\/pinedrive-256gb-nvme-ssd-2280\"\u003eM-key NVMe SSD\u003c\/a\u003e (2230 to 2280 sizes supported) and mount it under your Pi for a compact and fast storage solution - It even comes with rubber feet!\u003c\/p\u003e\n\u003cp\u003eIt's the perfect solution for turning your Raspberry Pi 5 into a file server, media centre, reverse proxy, etc. - any task that benefits from large amounts of fast storage, especially with random high operations per second (IOPS) workloads. In short, it's a game-changer!\u003c\/p\u003e\n\u003cp\u003eNVMe base follows the new \"PIP\" \u003ca href=\"https:\/\/datasheets.raspberrypi.com\/pcie\/pcie-connector-standard.pdf\"\u003edesign guidelines\u003c\/a\u003e provided by Raspberry Pi ensuring that it will be easy to use and be supported long term by updates to Raspberry Pi OS - though it is very early days and things are improving rapidly there!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/nvme-base-duo-for-raspberry-pi-5\"\u003eWe also stock the NVMe Base \u003cstrong\u003eDuo\u003c\/strong\u003e from Pimoroni\u003c\/a\u003e! Plus we stock \u003ca href=\"\/products\/pcie-flex-cable-for-nvme-base-and-raspberry-pi-5\"\u003ereplacement 35mm and alternative 50mm PCIe cables\u003c\/a\u003e to give you a variety of options for connecting and placing your NVMe Base.\u003c\/p\u003e\n\u003ch3\u003eRaspberry Pi Firmware\u003c\/h3\u003e\n\u003cp\u003eFor the most hassle-free experience, make sure your Raspberry Pi OS is up to date, and your RPi 5 firmware is updated to 2023-12-06 (Dec 6th) or newer. This supports all the features of the RPi PCIe spec and means you don't have to mess with config files to get started.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBase Kit\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNVMe Base PCB with M.2 Slot (M-Key)\u003c\/li\u003e\n\u003cli\u003e'PCIe Pipe' Flat Flex Cable (35mm)\u003c\/li\u003e\n\u003cli\u003e4x Rubber feet\u003c\/li\u003e\n\u003cli\u003eM2 bolt and 2x nuts for SSD mounting\u003c\/li\u003e\n\u003cli\u003e4x 7mm M2.5 standoffs for base mounting\u003c\/li\u003e\n\u003cli\u003e8x short M2.5 bolts for base mounting\u003c\/li\u003e\n\u003cli\u003e4x long M2.5 bolts for 'pass-thru' mounting with a HAT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eActive Cooler, Raspberry Pi and NVME SSD not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eDrive Compatibility\u003c\/h2\u003e\n\u003cp\u003ePimoroni have tested NVMe Base with the following M.2 NVMe drives successfully. They have usually tested one drive from one batch, so this is not comprehensive, or an 'Approved' list, but it's a good guide for drives to seek out:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Raspberry Pi SSD\" href=\"\/products\/raspberry-pi-ssd\"\u003eRaspberry Pi SSD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pinedrive-256gb-nvme-ssd-2242\"\u003ePinedrive 256GB NVMe SSD (2242)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pinedrive-256gb-nvme-ssd-2280\"\u003ePinedrive 256GB NVMe SSD (2280)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eAData Legend 700\u003c\/li\u003e\n\u003cli\u003eAData Legend 800\u003c\/li\u003e\n\u003cli\u003eAData XPG SX8200 Pro\u003c\/li\u003e\n\u003cli\u003eAxe Memory Generic Drive\u003c\/li\u003e\n\u003cli\u003eCrucial P2 M.2\u003c\/li\u003e\n\u003cli\u003eCrucial P3 M.2\u003c\/li\u003e\n\u003cli\u003eCrucial P3 Plus M.2\u003c\/li\u003e\n\u003cli\u003eFanxiang S501Q 512GB \u003cem\u003e(reported working well via Pi 5 PCIe by a customer - thanks Graeme)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eInland PCIe NVMe SSD\u003c\/li\u003e\n\u003cli\u003eKingston KC3000\u003c\/li\u003e\n\u003cli\u003eKioxia Exceria NVMe SSD\u003c\/li\u003e\n\u003cli\u003eKioxia Exceria G2 NVMe SSD\u003c\/li\u003e\n\u003cli\u003eLexar NM620\u003c\/li\u003e\n\u003cli\u003eLexar NM710\u003c\/li\u003e\n\u003cli\u003eNetac NV2000 NVMe SSD\u003c\/li\u003e\n\u003cli\u003eNetac NV3000 NVMe SSD\u003c\/li\u003e\n\u003cli\u003eOrigin Inception TLC830 Pro NVMe\u003c\/li\u003e\n\u003cli\u003ePNY CS1030 \u003cem\u003e(a customer reported issues using this stick with an Argon NVMe expansion, so perhaps not an ideal choice)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eSabrent Rocket 4.0\u003c\/li\u003e\n\u003cli\u003eSabrent Rocket Nano\u003c\/li\u003e\n\u003cli\u003eSamsung 980\u003c\/li\u003e\n\u003cli\u003eSamsung 980 Pro (500GB\/1TB)\u003c\/li\u003e\n\u003cli\u003eTeam MP33\u003c\/li\u003e\n\u003cli\u003eWestern Digital Black SN750\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSE \u003c\/strong\u003e(Phison Controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e'Maybe' List. Works with quirks\/not ideal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese drives either needed extra power, were a bit quirky when Pimoroni tested them or they've had reports of them being problematic. It may just be the drive they had, but they're probably best avoided.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKioxia BG4 2230. Performance very patchy. Runs at quite a high temp.\u003c\/li\u003e\n\u003cli\u003ePatriot P300 - These drives have various controllers, some of which seem to be incompatible at this time.\u003c\/li\u003e\n\u003cli\u003ePatriot P310 - These drives have various controllers, some of which seem to be incompatible at this time.\u003c\/li\u003e\n\u003cli\u003ePNY CS1030 (250GB). Reports of this size not working.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSamsung 970 EVO Plus. Runs at a higher temp. Some user reports of problems under heavy load or not showing up on boot.\u003c\/li\u003e\n\u003cli\u003eSamsung 980 Pro (250GB). Reports of this size not working.\u003c\/li\u003e\n\u003cli\u003eWD Blue SN550. Our fresh unit could be used as storage but could not be booted from.\u003c\/li\u003e\n\u003cli\u003eWD Red SN700. Slow to boot first time, but worked and booted OK.\u003c\/li\u003e\n\u003cli\u003eWD SN740. Our fresh unit worked well. YMMV.\u003c\/li\u003e\n\u003cli\u003eWD Black SN770. Our fresh unit worked fine. YMMV.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e'Avoid' List. Pimoroni had problems or reports of problems.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKingSpec NX Series\u003c\/li\u003e\n\u003cli\u003eKingston OM8SEP4256Q-A0\u003c\/li\u003e\n\u003cli\u003eTranscend 110Q (TS500GMTE110Q)\u003c\/li\u003e\n\u003cli\u003eWD Green\/Blue\/Red\/Black not in the above list. Variable results or not working because of quirks of a SanDisk controller\/firmware. Our SN350 and SN570 prevented the RPi 5 from booting at all especially.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOtherwise most M.2 NVMe drive (Not SATA!) you have lying around should work fine. Check out their benchmark results over at \u003ca href=\"https:\/\/pibenchmarks.com\/user\/pimoroni\/\" title=\"Benchmarks for NVMe Base\" target=\"_blank\"\u003epibenchmarks.net!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eGetting Started\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/youtu.be\/odG7FbptgWQ\" rel=\"noopener\" target=\"_blank\"\u003eVideo: Installing the Pimoroni NVMe Base on Raspberry Pi 5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.pimoroni.com\/article\/getting-started-with-nvme-base\" rel=\"noopener\" target=\"_blank\"\u003eLearn: Getting Started with NVMe Base for Raspberry Pi 5 \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFirmware\u003c\/h3\u003e\n\u003cp\u003eFor the most hassle-free experience, make sure your Raspberry Pi OS is up to date, and your RPi 5 firmware is updated to 2023-12-06 (Dec 6th) or newer. This supports all the features of the RPi PCIe spec and means you don't have to mess with config files to get started.\u003c\/p\u003e\n\u003cp\u003eSoftware update on the RPi OS should do this for you, but to force it you can:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eopen a Terminal (Ctrl-Alt-T)\u003c\/li\u003e\n\u003cli\u003erun\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ccode\u003esudo raspi-config\u003c\/code\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand choose '\u003cstrong\u003eLatest\u003c\/strong\u003e' under\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAdvanced Options \u0026gt; Bootloader Version\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRunning\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ccode\u003esudo rpi-eeprom-update\u003c\/code\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein the Terminal will tell you which version of firmware is running.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePCIe 3 Mode\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eTo enable experimental and not-officially-supported PCIe 3 mode, add the follow line to the \u003cstrong\u003e\u003ccode\u003e[all]\u003c\/code\u003e\u003c\/strong\u003e section at the end of your Raspberry Pi \u003cstrong\u003e\u003ccode\u003e\/boot\/config.txt\u003c\/code\u003e\u003c\/strong\u003e file like this:\u003c\/span\u003e\u003c\/p\u003e\n\u003cpre style=\"padding-left: 30px;\"\u003e\u003cstrong\u003e\u003ccode\u003e[all]\ndtparam=pciex1_gen=3\u003c\/code\u003e\u003c\/strong\u003e\u003c\/pre\u003e\n\u003cp\u003eSave and reboot - your drive is ready to use!\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFormatting the NVMe and booting from NVMe\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eIf you want to boot from the NVMe drive, follow these extra steps:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMake sure your firmware is updated as above\u003c\/li\u003e\n\u003cli\u003eFormat the drive using \u003ca title=\"Link to Raspberry Pi software including the media imager.\" href=\"https:\/\/www.raspberrypi.com\/software\/\" target=\"_blank\"\u003eRaspberry Pi Imager\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eYou can do this with your NVMe Base installed by booting the RPi 5 from the SD card and running Raspberry Pi Imager from the start menu.\u003c\/li\u003e\n\u003cli\u003eOpen a Terminal.\u003c\/li\u003e\n\u003cli\u003eRun \u003cstrong\u003e\u003ccode\u003esudo raspi-config\u003c\/code\u003e\u003c\/strong\u003e \u003c\/li\u003e\n\u003cli\u003eChoose NVMe boot from the 'Advanced' section.\u003c\/li\u003e\n\u003cli\u003eReboot your RPi 5.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlways power off your RPi and disconnect the power supply before installing or uninstalling the NVMe Base.\u003c\/li\u003e\n\u003cli\u003eNVMe Base offers a general-purpose PCIe x1 connection - while we know most people want to add fast storage in theory you can use other devices with it, we just can't help you make them work! :-D What Would Jeff (Geerling) do?\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/nvme-hat-drawing.pdf?v=1714386681\" target=\"_blank\"\u003eDimensional drawing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e3D model (\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/nvme-base-model.png?v=1714386681\" target=\"_blank\"\u003ePNG\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/nvme-base-model.step?v=1714386685\" target=\"_blank\"\u003eSTEP\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":42807269490883,"sku":"PIM699","price":13.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/nvme-base-for-raspberry-pi-5-nvme-base-the-pi-hut-pim699-41452922142915.jpg?v=1705488605"},{"product_id":"pcie-to-m-2-adapter-for-raspberry-pi-5","title":"PCIe to M.2 Adapter for Raspberry Pi 5","description":"\u003cp\u003eThis adapter enables the use of \u003cspan data-mce-fragment=\"1\"\u003e2230\/2242 size \u003ca title=\"Raspberry Pi SSD\" href=\"\/products\/raspberry-pi-ssd\"\u003eNVMe \u003c\/a\u003e\u003c\/span\u003e\u003ca title=\"Raspberry Pi SSD\" href=\"\/products\/raspberry-pi-ssd\"\u003eM.2 SSDs\u003c\/a\u003e with the Raspberry Pi 5, boosting storage speed and capacity, making it ideal for projects that require quick data transfer.\u003c\/p\u003e\n\u003cp\u003eIt's compatible specifically with the \u003ca href=\"\/products\/raspberry-pi-5\" data-mce-href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e, supporting both Gen2 and Gen3 modes and allowing for direct booting from the SSD. It comes with features such as dual LED indicators for status monitoring and a cooling fan vent to manage heat for both the \u003ca href=\"\/collections\/raspberry-pi-store\" data-mce-href=\"\/collections\/raspberry-pi-store\"\u003eRaspberry Pi\u003c\/a\u003e and the SSD.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Raspberry Pi 5 and NVME drive are not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eNVME Compatability\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eSome customers have reported compatibility issues with certain brands\/models of NVME drives with some Raspberry Pi 5 NME products. No 'official' compatibility list is maintained by Waveshare (\u003cem\u003eyet\u003c\/em\u003e).\u003c\/p\u003e\n\u003cp\u003eFor now,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/admin.shopify.com\/products\/nvme-base-for-raspberry-pi-5-nvme-base\" data-mce-href=\"https:\/\/admin.shopify.com\/products\/nvme-base-for-raspberry-pi-5-nvme-base\"\u003ewe suggest following the same compatibility list on the Pimoroni NVME Base page\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eas a starting point until something official is shared from Waveshare.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupport NVMe protocol M.2 solid state drive, high-speed read\/write, with high work efficiency.\u003c\/li\u003e\n\u003cli\u003ePCI-Ex1 Gen2 or Gen3 mode.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOnly supports Raspberry Pi 5\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with M.2 NVMe solid state drive of 2230\/2242 sizes\u003c\/li\u003e\n\u003cli\u003eOnboard working indicator lights, with PWR on continuously when powered, and ACT blinking during read\/write, making the operating status clear at a glance.\u003c\/li\u003e\n\u003cli\u003eHAT+ design, with onboard EEPROM chip.\u003c\/li\u003e\n\u003cli\u003eOnboard power monitoring chip, for real-time monitoring of the working status of the solid-state drive.\u003c\/li\u003e\n\u003cli\u003eReserved airflow vent for PI5 fans, increasing airflow, and reducing solid-state temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_M.2_HAT+\" data-mce-href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_M.2_HAT+\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e1x PCIe TO M.2 HAT+\u003c\/li\u003e\n\u003cli\u003e1x 2 x 20 Pin header\u003c\/li\u003e\n\u003cli\u003e1x 16-pin Cable 40mm\u003c\/li\u003e\n\u003cli\u003e1x Standoff pack\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Raspberry Pi 5 and NVME drive are\u003cspan\u003e \u003c\/span\u003enot included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":42834059329731,"sku":"WAV-26583","price":8.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/pcie-to-m-2-adapter-for-raspberry-pi-5-the-pi-hut-wav-26583-41508978786499.jpg?v=1706278806"},{"product_id":"n05-m-2-2242-pcie-to-nvme-top-extension-adapter-board-for-raspberry-pi-5","title":"M.2 PCIe to 2230\/2242 NVMe Top Extension Adapter Board for Raspberry Pi 5 (N05)","description":"\u003cp\u003eThe N05 adapter board from 52Pi is an NVMe M.2 SSD (\u003cstrong\u003e2230 or 2242 size\u003c\/strong\u003e) PCIe add-on board designed for the \u003ca href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe board uses the new PCIe interface of the Raspberry Pi 5, enabling the use of \u003ca title=\"Raspberry Pi SSD\" href=\"\/products\/raspberry-pi-ssd\"\u003eNVMe M2 SSDs\u003c\/a\u003e for rapid data transfer and fast boot times.\u003c\/p\u003e\n\u003cp\u003eThis add-on board \u003cstrong\u003eaccommodates NVMe SSD sizes 2230 and 2242\u003c\/strong\u003e. \u003cspan style=\"font-size: 0.875rem;\"\u003eIt also includes SSD mounting screws, allowing users to conveniently switch between these sizes as needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and NVME drive not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eNVME Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eSome customers have reported compatibility issues with certain brands\/models of NVME drives with Raspberry Pi 5.\u003c\/p\u003e\n\u003cp\u003eNo 'official' compatibility list is maintained by 52Pi or Raspberry Pi (yet), so\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/thepihut.com\/products\/nvme-base-for-raspberry-pi-5-nvme-base\" data-mce-href=\"https:\/\/thepihut.com\/products\/nvme-base-for-raspberry-pi-5-nvme-base\"\u003ewe suggest following the same compatibility list on the Pimoroni NVME Base page\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eas a starting point until something official is shared.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eNVMe Capability: Supports NVMe (M-key) drives in M.2 format sizes 2230 and 2242\u003c\/li\u003e\n\u003cli\u003ePCIe Support: PCIe x1 interface in both Gen 2 and Gen 3 standards\u003c\/li\u003e\n\u003cli\u003eHollow design: Hollow design provides excellent ventilation for cooling\u003c\/li\u003e\n\u003cli\u003eGold-plated PCB: Gold-plated PCBs offer superior electrical performance\u003c\/li\u003e\n\u003cli\u003ePCIe ultra-short signal lines: The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0\u003c\/li\u003e\n\u003cli\u003eLED Indicators: Features LED light for M.2 disk activity (“ACT”)\u003c\/li\u003e\n\u003cli\u003eCompatible Form Factor: The board format is compatible with the original Raspberry Pi HAT dimensions of 65 x 56.50mm\u003c\/li\u003e\n\u003cli\u003eM.2 Standard-Compliant Power System: Integrated voltage regulator delivers up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard\u003c\/li\u003e\n\u003cli\u003eComes with an FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw\u003c\/li\u003e\n\u003cli\u003eCamera\/Display FPC cut-out: The openings in the PCB allow for the routing of two Display\/Camera FPC cables.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.52pi.com\/index.php?title=EP-0209\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePinout\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/NVMe_Top_Extension_Adapter_Board_For_Raspberry_Pi_5_features_1.jpg?v=1705056723\"\u003e\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x N05 M.2 2242 PCIe to NVMe Top\u003c\/li\u003e\n\u003cli\u003e2x PCIe FFC cable (40mm length)\u003c\/li\u003e\n\u003cli\u003e5x M2.5 x 16mm Spacers\u003c\/li\u003e\n\u003cli\u003e11x M2.5 x 5mm Screws\u003c\/li\u003e\n\u003cli\u003e2x M2 x 4mm Screws\u003c\/li\u003e\n\u003cli\u003e1x Screwdriver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and NVME drive not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":42917237129411,"sku":"EP-0209","price":15.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/n05-m-2-2242-pcie-to-nvme-top-extension-adapter-board-for-raspberry-pi-5-the-pi-hut-ep-0209-41657174065347.jpg?v=1709123827"},{"product_id":"nvdac-for-raspberry-pi-5","title":"NVDAC for Raspberry Pi 5","description":"\u003cp\u003eThe 52Pi NVDAC stands for \u003cstrong\u003eNVMe \u0026amp; DAC\u003c\/strong\u003e. The DAC and PCIe to NVMe SSD HAT is a comprehensive board designed to augment the audio and storage capabilities of the \u003ca href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThis versatile add-on combines the acclaimed DAC+ Standard for \u003cstrong\u003ehigh-quality audio output\u003c\/strong\u003e and an \u003cstrong\u003eintegrated PCIe slot for accommodating NVMe 2230\/2242 SSDs\u003c\/strong\u003e (such as the \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"Raspberry Pi SSD\"\u003eRaspberry Pi SSD\u003c\/a\u003e), providing users with an all-in-one solution to elevate their Raspberry Pi 5 projects. The board also \u003cstrong\u003eincludes an IR receiver\u003c\/strong\u003e (pin 22, GPIO 25).\u003c\/p\u003e\n\u003cp\u003eSome simple setup is required, using the existing HiFiBerry dtoverlay in Raspberry Pi OS. \u003ca href=\"https:\/\/wiki.52pi.com\/index.php?title=EP-0218\"\u003ePlease see the Wiki for assembly and setup instructions\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and NVMe drive not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eNVME Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eSome customers have reported compatibility issues with certain brands\/models of NVME drives with Raspberry Pi 5.\u003c\/p\u003e\n\u003cp\u003eNo 'official' compatibility list is maintained by 52Pi or Raspberry Pi (yet), so\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/products\/nvme-base-for-raspberry-pi-5-nvme-base\"\u003ewe suggest following the same compatibility list on the Pimoroni NVME Base page\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eas a starting point until something official is shared.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDAC+ Standard\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eExceptional Audio Quality: The DAC+ Standard boasts high-quality audio performance, leveraging a top-tier digital-to-analog converter (DAC) for superior sound reproduction.\u003c\/li\u003e\n\u003cli\u003eDirect I2S Sound Port Connection: Utilizes the I2S sound port to connect directly to the Raspberry Pi 5's CPU, avoiding additional USB conversions and preserving audio signal integrity.\u003c\/li\u003e\n\u003cli\u003e192kHz\/24bit Support: Supports sample rates up to 192kHz with a 24-bit depth, ensuring a detailed and immersive listening experience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCIe to NVMe SSD Slot\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eNVMe Storage Expansion: Integrated PCIe slot designed for NVMe 2230\/2242 SSDs allows users to significantly expand storage capacity and enhance data transfer speeds.\u003c\/li\u003e\n\u003cli\u003eHigh-Speed Data Access: Leveraging NVMe technology, the hat enables high-speed data access, making it suitable for various storage-intensive applications, such as media storage and data processing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR receiver:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eInfrared receiver on GPIO 25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaspberry Pi 5 Compatibility\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically designed to seamlessly integrate with the Raspberry Pi 5, ensuring compatibility and optimal performance\u003c\/li\u003e\n\u003cli\u003eHAT Form Factor: Easy to mount directly onto the Raspberry Pi 5 GPIO pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser-Friendly Design\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003ePlug-and-Play Installation: Designed for user convenience with plug-and-play installation\u003c\/li\u003e\n\u003cli\u003eCompact and Efficient: The board is compact, ensuring it does not obstruct adjacent components, and efficiently combines audio and storage capabilities in a single solution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Applications\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eAudio Enhancement: Ideal for audio enthusiasts looking to enhance the audio output quality of their Raspberry Pi 5 projects.\u003c\/li\u003e\n\u003cli\u003eStorage Expansion: Suited for users seeking additional storage options for their Raspberry Pi 5-based applications, providing the flexibility to integrate NVMe SSDs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.52pi.com\/index.php?title=EP-0218\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 52Pi NVDAC board\u003c\/li\u003e\n\u003cli\u003e1 x PC104 pin header\u003c\/li\u003e\n\u003cli\u003e1 x M.2 2230 fixing copper pillar\u003c\/li\u003e\n\u003cli\u003e2 x Black M2.0 fixing screw for SSD drive\u003c\/li\u003e\n\u003cli\u003e2 x PCIe FFC cable (40mm length)\u003c\/li\u003e\n\u003cli\u003e4 x M2.5 Copper pillar\u003c\/li\u003e\n\u003cli\u003e4 x M2.5 Screw\u003c\/li\u003e\n\u003cli\u003e4 x M2.5 nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and NVMe drive not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":43225557958851,"sku":"EP-0218","price":28.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/nvdac-for-raspberry-pi-5-52pi-ep-0218-41967631466691.jpg?v=1713279545"},{"product_id":"nvdigi-for-raspberry-pi-5","title":"NVDigi for Raspberry Pi 5","description":"\u003cp\u003eThe 52Pi NVDigi is a versatile expansion board designed for the \u003ca href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e, combining Digi+ audio capabilities for \u003cstrong\u003ehigh-quality S\/PDIF audio output\u003c\/strong\u003e and an \u003cstrong\u003eM.2 PCIe x1 slot to\u003c\/strong\u003e \u003cstrong\u003eaccommodate NVMe 2242\/2230 SSDs\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eUnlock the full potential of your Raspberry Pi 5 with the 52Pi NVdigi, combining high-quality audio output with the convenience of \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"Raspberry Pi SSD\"\u003eM.2 PCIe NVMe SSD\u003c\/a\u003e storage expansion. Transform your projects into versatile, multimedia-rich experiences with this innovative and feature-packed expansion board. The board offers both \u003cstrong\u003ean optical output (TOSLink) and an electrical output featuring an RCA port\u003c\/strong\u003e. It\u003cspan data-mce-fragment=\"1\"\u003e also \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eincludes an IR receiver\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e (pin 22, GPIO 25).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSome simple setup is required, using the existing HiFiBerry dtoverlay in Raspberry Pi OS. \u003c\/span\u003e\u003ca href=\"https:\/\/wiki.52pi.com\/index.php?title=EP-0220\"\u003ePlease see the Wiki for assembly and setup instructions\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eRaspberry Pi and NVMe drive not included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eNVME Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eSome customers have reported compatibility issues with certain brands\/models of NVME drives with Raspberry Pi 5.\u003c\/p\u003e\n\u003cp\u003eNo 'official' compatibility list is maintained by 52Pi or Raspberry Pi (yet), so\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/products\/nvme-base-for-raspberry-pi-5-nvme-base\"\u003ewe suggest following the same compatibility list on the Pimoroni NVME Base page\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eas a starting point until something official is shared.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Quality S\/PDIF Output:\u003c\/strong\u003e The NVdigi provides a high-quality S\/PDIF (Sony\/Philips Digital Interface) output for the Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect I2S Sound Port Connection:\u003c\/strong\u003e Utilises the I2S sound port, connecting directly to the CPU without the need for additional USB conversion, ensuring optimal audio signal integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSample Rates up to 192kHz\/24bit:\u003c\/strong\u003e Supports high-resolution audio with sample rates up to 192kHz and 24-bit depth, delivering an immersive and detailed audio experience\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptical (TOSLink) and Electrical (RCA) Outputs:\u003c\/strong\u003e Offers versatile connectivity options with both an optical output (TOSLink) and an electrical output featuring an RCA port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpandable Storage:\u003c\/strong\u003e Features an M.2 PCIe x1 slot that supports NVMe 2242\/2230 SSDs, enabling you to significantly enhance your Raspberry Pi 5's storage capacity and speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Speed Data Transfer:\u003c\/strong\u003e Leveraging NVMe technology, the board facilitates high-speed data transfer, making it suitable for various applications such as media storage and data-intensive projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR receiver:\u003c\/strong\u003e Infrared receiver on GPIO 25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaspberry Pi 5 Compatibility:\u003c\/strong\u003e Specifically designed to seamlessly integrate with the Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatility in Applications: \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eAudio Enthusiasts: Ideal for audio enthusiasts looking to achieve premium S\/PDIF audio output without compromising on quality.\u003c\/li\u003e\n\u003cli\u003eStorage Expansion: Suited for users seeking expanded storage options for their Raspberry Pi 5 projects, facilitating the use of NVMe SSDs for faster data access.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser-Friendly Design: \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eEasy Installation:The NVdigi offers a user-friendly design for straightforward installation on the Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eCompact Form Factor: Designed with a compact form factor, ensuring the board integrates seamlessly into your Raspberry Pi 5 setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.52pi.com\/index.php?title=EP-0220\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 52Pi NVDigi board\u003c\/li\u003e\n\u003cli\u003e1 x PC104 pin header\u003c\/li\u003e\n\u003cli\u003e1 x PCIe FFC cable (40mm length)\u003c\/li\u003e\n\u003cli\u003e4 x M2.5 x 15mm Copper pillar\u003c\/li\u003e\n\u003cli\u003e8 x M2.5 x 4mm Flat head screw\u003c\/li\u003e\n\u003cli\u003e1 x M2.5 Screwdriver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and NVMe drive not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":43225779667139,"sku":"EP-0220","price":28.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/nvdigi-for-raspberry-pi-5-52pi-ep-0220-41967734816963.jpg?v=1713281882"},{"product_id":"m-2-2280-nvme-pcie-bottom-for-raspberry-pi-5-n07","title":"M.2 2280 NVMe PCIe Bottom for Raspberry Pi 5 (N07)","description":"\u003cp\u003eThis is a bottom-mounted NVME M.2 SSD PCIe peripheral board for \u003ca href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e which uses the new PCIe interface to utilise \u003ca title=\"Raspberry Pi SSD\" href=\"\/products\/raspberry-pi-ssd\"\u003eNVME M2 SSDs\u003c\/a\u003e for fast data transfer and ultra-fast booting.\u003c\/p\u003e\n\u003cp\u003eThe board \u003cstrong\u003esupports four sizes of NVMe SSD: 2230, 2242, 2260 and 2280\u003c\/strong\u003e and includes an LED indicator for M.2 disk activity. The included SSD mounting screws make it convenient for users to switch between sizes at any time.\u003c\/p\u003e\n\u003cp\u003eSome simple setup is required. \u003ca href=\"https:\/\/wiki.52pi.com\/index.php?title=EP-0211\"\u003ePlease see the Wiki for assembly and setup instructions\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eRaspberry Pi and NVMe drive not included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eNVME Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eSome customers have reported compatibility issues with certain brands\/models of NVME drives with Raspberry Pi 5.\u003c\/p\u003e\n\u003cp\u003eNo 'official' compatibility list is maintained by 52Pi or Raspberry Pi (yet), so\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/products\/nvme-base-for-raspberry-pi-5-nvme-base\"\u003ewe suggest following the same compatibility list on the Pimoroni NVME Base page\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eas a starting point until something official is shared.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for Raspberry Pi 5:\u003c\/strong\u003e Dedicated to the latest single-board computer, the Raspberry Pi 5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNVMe Capability\u003c\/strong\u003e: Supports NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCIe Support\u003c\/strong\u003e: PCIe x1 interface in both Gen2 \u0026amp; Gen3 standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilation hole design\u003c\/strong\u003e: Ventilation hole design provides excellent ventilation airflow for cooling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-plated PCB\u003c\/strong\u003e: Superior electrical performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCIe ultra-short signal lines\u003c\/strong\u003e: The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Indicators\u003c\/strong\u003e: Features LED light for M.2 disk activity (“ACT”)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM.2 Standard-Compliant Power System\u003c\/strong\u003e: Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.52pi.com\/index.php?title=EP-0211\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.52pi.com\/index.php?title=EP-0211#How_to_enable_PCIe_on_Raspberry_Pi_5?\"\u003eHow to enable PCIe on Raspberry Pi 5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.52pi.com\/images\/4\/4a\/2D_Mech_N07_M.2_2280_PCIe_to_NVMe_Bottom.png\"\u003eDrawing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x N07 M.2 2280 PCIe to NVMe Bottom\u003c\/li\u003e\n\u003cli\u003e1 x Custom PCIe FFC cable\u003c\/li\u003e\n\u003cli\u003e4 x M2.5x16mm Spacers\u003c\/li\u003e\n\u003cli\u003e4 x M2.5x5mm Screws\u003c\/li\u003e\n\u003cli\u003e1 x M2x4mm Screws (to secure the NVME M2 SSD)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eRaspberry Pi and NVMe drive not included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":43226097483971,"sku":"EP-0211","price":16.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/m-2-2280-nvme-pcie-bottom-for-raspberry-pi-5-n07-52pi-ep-0211-41968137240771.jpg?v=1713286921"},{"product_id":"nvme-base-duo-for-raspberry-pi-5","title":"NVMe Base Duo for Raspberry Pi 5","description":"\u003cp\u003eNVMe Base Duo is a PCIe Gen 2 extension board for \u003ca href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e. Simply populate it with one or two \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"Raspberry Pi SSD\"\u003eM-key NVMe SSDs\u003c\/a\u003e (2230 to 2280 sizes supported) and mount it under (or over) your Pi for a compact and fast storage solution - It even comes with rubber feet!\u003c\/p\u003e\n\u003cp\u003eIt's the perfect solution for turning your \u003ca href=\"\/collections\/raspberry-pi-store\"\u003eRaspberry Pi 5\u003c\/a\u003e into a file server, media centre, reverse proxy, home automation server with built-in backup, etc. - really any task that benefits from large amounts of fast storage, redundancy, or just to make use of a couple of spare disks - especially with random high operations per second (IOPS) workloads. In short, it's a game-changer!\u003c\/p\u003e\n\u003cp\u003eNVMe Base Duo follows the new \"PIP\" design guidelines provided by Raspberry Pi ensuring that it will be easy to use and be supported long-term by updates to Raspberry Pi OS - though it is very early days and things are improving rapidly there!\u003c\/p\u003e\n\u003cp\u003eWe recommend running the Raspberry Pi 5 at PCIe Gen 2 x 1 speeds with this Base. The total throughput is around 450MB\/sec, or 220MB\/sec+ per disk for simultaneous access as they share the bandwidth through the PCIe switch.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/nvme-base-for-raspberry-pi-5-nvme-base\"\u003eWe also stock the standard NVMe Base from Pimoroni\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: It is now possible to boot from NVMe drives installed on NVMe Base Duo! \u003c\/strong\u003eMake sure your Raspberry Pi firmware is updated to the most recent version (17\/05\/24 or later).\u003c\/p\u003e\n\u003ch2\u003eDrive Compatibility\u003c\/h2\u003e\n\u003cp\u003eWe've tested NVMe Base Duo with the following drives successfully. We have usually tested one drive from one batch, so this is not comprehensive, or an 'Approved' list, but it's a good guide for drives to seek out.\u003c\/p\u003e\n\u003cp\u003eIn general, \u003cstrong\u003eas the drives are behind the switch and not being used at boot we’ve found a much wider range of drives to be working and useful\u003c\/strong\u003e compared to the\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"\/products\/nvme-base-for-raspberry-pi-5-nvme-base\" target=\"_blank\"\u003estandard NVMe Base\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"Raspberry Pi SSD\"\u003eRaspberry Pi SSD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pinedrive-256gb-nvme-ssd-2242\"\u003ePinedrive 256GB NVMe SSD (2242)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/pinedrive-256gb-nvme-ssd-2280\"\u003ePinedrive 256GB NVMe SSD (2280)\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eADATA SX8200PNP\u003c\/li\u003e\n\u003cli\u003eADATA LEGEND 700\u003c\/li\u003e\n\u003cli\u003eCrucial CT500P5PSSD8\u003c\/li\u003e\n\u003cli\u003eGigabyte GP-GSM2NE3256GNTD\u003c\/li\u003e\n\u003cli\u003eKingston SKC3000S512G\u003c\/li\u003e\n\u003cli\u003eKIOXIA EXCERIA SSD 500GB\u003c\/li\u003e\n\u003cli\u003eKIOXIA EXCERIA G2 SSD 2TB\u003c\/li\u003e\n\u003cli\u003eLexar SSD NM710 1TB\u003c\/li\u003e\n\u003cli\u003eNetac NV200-512-E4X\u003c\/li\u003e\n\u003cli\u003eORIGIN Inception TLC830 Pro 256GB\u003c\/li\u003e\n\u003cli\u003ePatriot P300 256GB\u003c\/li\u003e\n\u003cli\u003ePatriot P310 240GB\u003c\/li\u003e\n\u003cli\u003ePatriot P300 512GB\u003c\/li\u003e\n\u003cli\u003ePNY CS1030 1TB\u003c\/li\u003e\n\u003cli\u003eSabrent Rocket Nano 500GB\u003c\/li\u003e\n\u003cli\u003eSabrent SB-RKT4P-1TB\u003c\/li\u003e\n\u003cli\u003eSabrent Rocket 4.0 1TB\u003c\/li\u003e\n\u003cli\u003eSamsung SSD 970 EVO Plus 500GB\u003c\/li\u003e\n\u003cli\u003eSamsung SSD 980 500GB\u003c\/li\u003e\n\u003cli\u003eSamsung SSD 980 PRO 1TB\u003c\/li\u003e\n\u003cli\u003eSK hynix GOLD P31\u003c\/li\u003e\n\u003cli\u003eTeamGroup TM8FP6256G\u003c\/li\u003e\n\u003cli\u003eToshiba KBG40ZNS1T02 1TB\u003c\/li\u003e\n\u003cli\u003eTranscend TS500GMTE110Q\u003c\/li\u003e\n\u003cli\u003eWD Blue SN550 500GB\u003c\/li\u003e\n\u003cli\u003eWD Black SN750 SE\u003c\/li\u003e\n\u003cli\u003eWD PC SN740 512GB\u003c\/li\u003e\n\u003cli\u003eWD Red SN700 500GB\u003c\/li\u003e\n\u003cli\u003eWD Black SN770 1TB\u003c\/li\u003e\n\u003cli\u003eWD Blue SN570 1TB\u003c\/li\u003e\n\u003cli\u003eWD Green SN350 480GB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e'Avoid' List. We've had problems or reports of problems.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOrtial ON-750-128 256GB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOtherwise, most M.2 NVMe drives (not SATA!) you have lying around should work fine.\u003c\/p\u003e\n\u003cp\u003eCheck out our benchmark results at \u003ca rel=\"noopener\" href=\"https:\/\/pibenchmarks.com\/user\/pimoroni\/\" title=\"Benchmarks for NVMe Base\" target=\"_blank\"\u003epibenchmarks.net!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eGetting Started\u003c\/h2\u003e\n\u003cp\u003eFor the most hassle-free experience, make sure your Raspberry Pi OS is up to date, and your RPi 5 firmware is updated to 2023-12-06 (Dec 6th) or newer. This supports all the features of the RPi PCIe spec and means you don't have to mess with config files to get started.\u003c\/p\u003e\n\u003cp\u003eSoftware update on the RPi OS should do this for you, but to force it you can:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eopen a Terminal (Ctrl-Alt-T)\u003c\/li\u003e\n\u003cli\u003erun\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ccode\u003esudo raspi-config\u003c\/code\u003e \u003c\/strong\u003eand choose 'Latest' under\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAdvanced Options \u0026gt; Bootloader Version\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRunning\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ccode\u003esudo rpi-eeprom-update\u003c\/code\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein the Terminal will tell you which version of firmware is running.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAlways power off your RPi and disconnect the power supply before installing or uninstalling the NVMe Base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eNVMe Base Duo offers offers two PCIe Gen 2 M.2 slots behind a PCIe Gen2 Packet Switcher on a general-purpose PCIe x1 connection - while we know most people want to add fast storage in theory you can use other devices with it, we just can't help you make them work! :-D \u003c\/span\u003e\u003cspan\u003eWhat Would Jeff (Geerling) Do?\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLes used NVMe Base Duo to connect up the module from a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/shop.pimoroni.com\/products\/raspberry-pi-ai-kit\" rel=\"noopener\" target=\"_blank\"\u003eRaspberry Pi AI Kit\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eat the same time as an NVMe SSD. \u003ca rel=\"noopener\" href=\"https:\/\/www.tomshardware.com\/raspberry-pi\/raspberry-pi-ai-kit-review\" target=\"_blank\"\u003eCheck out his review!\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.pimoroni.com\/article\/getting-started-with-nvme-base-duo\"\u003eGetting Started\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/nvme-base-duo-drawing.png?v=1719396530\" rel=\"noopener\" target=\"_blank\"\u003eDimensional drawing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNVMe Base Duo PCB with two M.2 slots (M-Key)\u003c\/li\u003e\n\u003cli\u003e'PCIe Flex' Flat Flex Cable\u003c\/li\u003e\n\u003cli\u003e4x Rubber feet\u003c\/li\u003e\n\u003cli\u003e4x M2 bolt and 2x 5mm standoffs for SSD mounting\u003c\/li\u003e\n\u003cli\u003e4x 12mm M2.5 standoffs for base mounting\u003c\/li\u003e\n\u003cli\u003e8x short M2.5 bolts for base mounting\u003c\/li\u003e\n\u003cli\u003e4x 20mm M2.5 bolts for 'pass-thru' mounting with a HAT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":43279496806595,"sku":"PIM704","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/nvme-base-duo-for-raspberry-pi-5-nvme-base-duov-pimoroni-pim704-42023606124739.jpg?v=1713776341"},{"product_id":"raspberry-pi-m2-hat-plus","title":"Raspberry Pi M.2 HAT+","description":"\u003cp\u003eThe \u003ca href=\"\/collections\/raspberry-pi\" title=\"Raspberry Pi\"\u003eRaspberry Pi\u003c\/a\u003e M.2 HAT+ enables you to connect M.2 peripherals such as \u003ca title=\"Raspberry Pi SSD\" href=\"\/products\/raspberry-pi-ssd\"\u003eNVMe drives\u003c\/a\u003e and AI accelerators to the \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e PCIe 2.0 interface, supporting fast (up to 500 MB\/s) data transfer to and from NVMe drives and other PCIe accessories.\u003c\/p\u003e\n\u003cp\u003eRaspberry Pi 5’s single-lane PCI Express 2.0 interface is exposed on a 16-pin, 0.5mm-pitch FPC connector; the M.2 HAT+ M Key is a mechanical adapter board that converts between this connector and a subset of the M.2 standard.\u003c\/p\u003e\n\u003cp\u003eIt supports devices that have the M.2 \u003cstrong\u003eM key\u003c\/strong\u003e edge connector, in the \u003cstrong\u003e2230\u003c\/strong\u003e and \u003cstrong\u003e2242\u003c\/strong\u003e form factors. It is capable of supplying up to 3A to connected M.2 devices.\u003c\/p\u003e\n\u003cp\u003eThe Raspberry Pi M.2 HAT+ conforms to the \u003ca href=\"https:\/\/datasheets.raspberrypi.com\/hat\/hat-plus-specification.pdf\" title=\"Raspberry Pi HAT+ specification\"\u003eRaspberry Pi HAT+ specification\u003c\/a\u003e and is autodetected by the \u003ca href=\"https:\/\/www.raspberrypi.com\/software\/\" title=\"Raspberry Pi OS\"\u003elatest Raspberry Pi software\/firmware\u003c\/a\u003e (\u003cstrong\u003eplease ensure you update Raspberry Pi OS before using\u003c\/strong\u003e). It is supplied with a 16mm stacking header and threaded spacers, so it can be fitted to a Raspberry Pi 5 with the \u003ca href=\"\/products\/active-cooler-for-raspberry-pi-5\" title=\"Raspberry Pi Active Cooler\"\u003eRaspberry Pi Active Cooler\u003c\/a\u003e in place.\u003c\/p\u003e\n\u003cp\u003eWe also offer the \u003ca href=\"\/products\/raspberry-pi-m-2-hat-compact\" title=\"Raspberry Pi M.2 HAT+ Compact\"\u003eM.2 HAT+ Compact\u003c\/a\u003e, and a \u003ca href=\"\/products\/layer-case-for-raspberry-pi-m-2-hat-active-cooler\"\u003eminimalist layer case for the Raspberry Pi M.2 HAT+!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWant to stack a HAT on top of this one? \u003c\/strong\u003eYou'll need one of these \u003ca href=\"\/products\/40-pin-extra-tall-header-push-fit-version-no-shroud\" title=\"Tall Push-Fit Stacking GPIO Header for Raspberry Pi - No Shroud\"\u003etall push-fit stacking headers\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and NVMe devices not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eCompatible with Raspberry Pi 5 only\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eSupports single-lane PCIe 2.0 interface (500 MB\/s peak transfer rate)\u003c\/li\u003e\n\u003cli\u003eSupports devices that use the M.2 M key edge connector\u003c\/li\u003e\n\u003cli\u003eSupports devices with the 2230 or 2242 form factor\u003c\/li\u003e\n\u003cli\u003eCapable of supplying up to 3A to connected M.2 devices\u003c\/li\u003e\n\u003cli\u003eIncludes power and activity LEDs\u003c\/li\u003e\n\u003cli\u003eConforms to the Raspberry Pi HAT+ specification\u003c\/li\u003e\n\u003cli\u003eSupplied with ribbon cable, 16mm stacking header, threaded spacers and screws, and knurled double-flanged screw to secure and support the M.2 peripheral\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating temperature: 0°C to 50°C (ambient)\u003c\/li\u003e\n\u003cli\u003eProduction lifetime: The Raspberry Pi M.2 HAT+ will remain in production until at least January 2032\u003c\/li\u003e\n\u003cli\u003eCompliance: For a full list of local and regional product approvals, please visit \u003ca href=\"https:\/\/pip.raspberrypi.com\/\" title=\"Raspberry Pi PIP\"\u003epip.raspberrypi.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePhysical Specification\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Raspberry_Pi_M2_HAT_Drawing.jpg\"\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.raspberrypi.com\/documentation\/accessories\/m2-hat-plus.html#installation\" title=\"Raspberry Pi M.2 HAT+ assembly instructions\"\u003eRaspberry Pi M.2 HAT+ installation and assembly instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.raspberrypi.com\/documentation\/accessories\/m2-hat-plus.html#boot-from-nvme\" title=\"Boot from NVMe with the Raspberry Pi M.2 HAT+\"\u003eHow to boot from NVMe with the Raspberry Pi M.2 HAT+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Using the M.2 HAT+ with Raspberry Pi 5\" href=\"https:\/\/www.raspberrypi.com\/news\/using-m-2-hat-with-raspberry-pi-5\/\"\u003eBlog: Using the M.2 HAT+ with Raspberry Pi 5\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/datasheets.raspberrypi.com\/m2-hat-plus\/raspberry-pi-m2-hat-plus-product-brief.pdf\" title=\"Raspberry Pi M.2 HAT+ product brief\"\u003eRaspberry Pi M.2 HAT+ product brief\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/datasheets.raspberrypi.com\/m2-hat-plus\/raspberry-pi-m2-hat-plus-schematics.pdf\" title=\"Raspberry Pi M.2 HAT+ schematics\"\u003eRaspberry Pi M.2 HAT+ schematics\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.raspberrypi.com\/news\/m-2-hat-on-sale-now-for-12\/\" title=\"Raspberry Pi M.2 HAT Launch Blog Post\"\u003eRaspberry Pi M.2 HAT+ Launch Blog Post\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eProduct SKU: Raspberry Pi SC1166\u003c\/li\u003e\n\u003cli\u003eEAN: 5056561801463\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Raspberry Pi M.2 HAT+\u003c\/li\u003e\n\u003cli\u003e1x PCI-e ribbon cable\u003c\/li\u003e\n\u003cli\u003e1x 16mm GPIO Stacking Header\u003c\/li\u003e\n\u003cli\u003e4x Threaded Spacers\u003c\/li\u003e\n\u003cli\u003e8x Screws\u003c\/li\u003e\n\u003cli\u003e1x Knurled double-flanged screw to secure and support the M.2 peripheral\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and NVMe devices not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I fit the M.2 HAT+ inside the official Raspberry Pi 5 case with the Active Cooler?\u003c\/strong\u003e Yes...\u003cem\u003ekind of\u003c\/em\u003e! If you pop the lid off the case, remove the central clear fan insert and don't use the bottom screws to secure the HAT to the Pi, it fits. The header supplied with the HAT keeps things secure enough. You can't fit the top lid section back on though. Like this:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Raspberry_Pi_M2_HAT_Plus_in_Official_Case.jpg?v=1715692327\"\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe connection of incompatible devices (incorrect key etc) to the Raspberry Pi M.2 HAT+ may affect compliance, result in damage to the unit, and invalidate the warranty\u003c\/li\u003e\n\u003cli\u003eThe connection of incompatible devices to the PCIe interface of a Raspberry Pi computer may affect compliance and result in damage to the unit and invalidate the warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":43441809686723,"sku":"SC1166","price":11.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/raspberry-pi-m-2-hat-raspberry-pi-sc1166-42184838938819.jpg?v=1715670122"},{"product_id":"hatdrive-top-for-raspberry-pi-5","title":"HatDrive! Top for Raspberry Pi 5","description":"\u003cp\u003eIntroducing the \u003ca href=\"\/collections\/pineboards\"\u003ePineboards\u003c\/a\u003e HatDrive! Top - the ultimate companion for your \u003ca href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e designed to enhance your experience by allowing you to use fast and reliable NVMe storage with your Pi 5!\u003c\/p\u003e\n\u003cp\u003eThe HAT \u003cstrong\u003esupports M-key NVMe drives in M.2 format sizes 2230 and 2242\u003c\/strong\u003e (such as the \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"Raspberry Pi SSD\"\u003eRaspberry Pi SSD\u003c\/a\u003e) and includes dual LED indicators, dedicated I2C EEPROM memory and advanced power supply monitoring and diagnostics.\u003c\/p\u003e\n\u003cp\u003eThe design is stackable when used with tall stacking GPIO headers, allowing the use of other HATs and add-ons. \u003ca href=\"\/products\/hatdrive-top-lite-for-raspberry-pi-5\" title=\"HatDrive! Lite\"\u003eWe also stock the HatDrive! Lite - a cheaper version which does not include the GPIO section\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and NVMe device not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWill my NVMe SSD work with this board?\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pineboards.io\/pages\/support-article-nvme-ssd-compatibility-list\"\u003ePineboards maintain an NVMe compatibility list\u003c\/a\u003e showing which drives work with their NVMe boards.\u003c\/p\u003e\n\u003cp\u003eOther NVMe drives may work however the link above shows all fully tested options - including the \u003cspan\u003e\u003ca href=\"\/products\/pinedrive-256gb-nvme-ssd-2242\"\u003ePinedrive 2242 NVMe SSD\u003c\/a\u003e we stock in the store.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePCIe FPC Bundles now available\u003c\/h3\u003e\n\u003cp\u003eIn case you are thinking about integrating this board into your custom project, don't overlook the optional\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/products\/pcie-fpc-bundle\"\u003ePineboards PCIe FPC Bundle\u003c\/a\u003e. Utilising the 100mm ribbon cable will provide you with added flexibility during the installation process of our boards.\u003c\/p\u003e\n\u003cp\u003eWe now stock an \u003ca title=\"XL PCIe FPC Bundle\" href=\"\/products\/xl-pcie-fpc-bundle\"\u003eXL version of the bundle\u003c\/a\u003e too!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecially Designed for Raspberry Pi 5:\u003c\/strong\u003e Dedicated to the latest single-board computer, the Raspberry Pi 5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNVMe Drive Installation Capability:\u003c\/strong\u003e Supports installing NVMe (M-key) drives in M.2 format sizes 2230 and 2242.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCIe Interface Support:\u003c\/strong\u003e Offers support for PCIe x1 interface in both Gen2 and Gen3 standards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual LED Indicators:\u003c\/strong\u003e Features 2 LED lights for power supply voltage (“PWR”) and M.2 disk activity (“ACT”).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Form Factor:\u003c\/strong\u003e Board format is compatible with the original Raspberry Pi HAT dimensions of 65 x 56.50 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40-Pin Raspberry Pi HAT Connector Support:\u003c\/strong\u003e Supports the standard 40-pin Raspberry Pi HAT connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated I2C EEPROM Memory:\u003c\/strong\u003e Compatible with HAT ID, allowing for advanced identification and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Power Supply Monitoring and Diagnostics:\u003c\/strong\u003e Continuous monitoring and diagnostics of the power supply bus, measuring voltage, current, and power parameters in real-time via an I2C interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM.2 Standard-Compliant Power System:\u003c\/strong\u003e Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy and Quick M.2 Disk Installation:\u003c\/strong\u003e Quick installation of M.2 disks in 2230 or 2242 format, thanks to a dedicated metal bracket (custom CNC made).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM.2 Card Power Options:\u003c\/strong\u003e Capable of powering the M.2 card directly from the FPC PCIe ribbon (port providing a minimum of 5W continuous power) or through the 40-pin HAT connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser-Friendly PCB Markings:\u003c\/strong\u003e Clear PCB markings for user convenience.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Quality Components:\u003c\/strong\u003e Utilizes top-quality electronic components and a 4-layer PCB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStackable Design:\u003c\/strong\u003e Allows for further connection of additional HAT boards in a stack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll Necessary Accessories Included:\u003c\/strong\u003e Comes with a dedicated FPC PCIe ribbon, spacer pins, M2.5 screws, a spacer pin for M.2 card mounting, and an optional 28-pin male-female HAT connector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: justify;\"\u003e\u003ca href=\"\/blogs\/raspberry-pi-tutorials\/pineboards-hatdrive-top-documentation\" title=\"Pineboards HatDrive! Top Documentation\"\u003eHatDrive! Top documentation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"How to Update the Firmware on your Raspberry Pi 5\" href=\"\/blogs\/raspberry-pi-tutorials\/how-to-update-the-firmware-on-your-raspberry-pi-5\"\u003eHow to update the Firmware on your Raspberry Pi 5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"How to Flash an NVMe Boot Drive with Raspberry Pi 5\" href=\"\/blogs\/raspberry-pi-tutorials\/how-to-flash-an-nvme-boot-drive-with-raspberry-pi-5\"\u003eHow to flash an NVMe boot drive with Raspberry Pi 5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"How to Update your Raspberry Pi Kernel and Install Kernel Headers\" href=\"\/blogs\/raspberry-pi-tutorials\/how-to-update-your-raspberry-pi-kernel-and-install-kernel-headers\"\u003eHow to update your Raspberry Pi Kernel and install Kernel Headers\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x HatDrive! Top board\u003c\/li\u003e\n\u003cli\u003e1x 25mm PCIe FPC cable with controlled impedance\u003c\/li\u003e\n\u003cli\u003e1x 40 pin GPIO header\u003c\/li\u003e\n\u003cli\u003e4x Standoffs\u003c\/li\u003e\n\u003cli\u003e1x M.2 drive standoff\u003c\/li\u003e\n\u003cli\u003e9x M2.5 screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and NVMe device not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Pineboards","offers":[{"title":"Default Title","offer_id":43658176987331,"sku":"105913","price":19.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/hatdrive-top-for-raspberry-pi-5-pineboards-105913-42368206995651.jpg?v=1717692603"},{"product_id":"hatdrive-top-lite-for-raspberry-pi-5","title":"HatDrive! Top Lite for Raspberry Pi 5","description":"\u003cp\u003eIntroducing the HatDrive! Top \u003cstrong\u003eLite\u003c\/strong\u003e - a streamlined variant of the \u003ca href=\"\/products\/hatdrive-top-for-raspberry-pi-5\"\u003eHatDrive! Top\u003c\/a\u003e designed for your \u003ca href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e to enhance your experience with fast and reliable \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"Raspberry Pi SSD\"\u003eNVMe storage\u003c\/a\u003e \u003cem\u003e(NVMe SSD not included)\u003c\/em\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis version retains all the high-performance features of the original HatDrive! Top minus the 2x20 pin GPIO expansion header\u003c\/strong\u003e, making it a cost-effective solution for those not requiring board stacking capabilities.\u003c\/p\u003e\n\u003cp\u003eThe HAT \u003cstrong\u003esupports M-key NVMe drives in M.2 format sizes 2230 and 2242\u003c\/strong\u003e and includes dual LED indicators, dedicated I2C EEPROM memory and advanced power supply monitoring and diagnostics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and NVMe device not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWill my NVMe SSD work with this board?\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pineboards.io\/pages\/support-article-nvme-ssd-compatibility-list\"\u003ePineboards maintain an NVMe compatibility list\u003c\/a\u003e showing which drives work with their NVMe boards.\u003c\/p\u003e\n\u003cp\u003eOther NVMe drives may work however the link above shows all fully tested options - including the \u003cspan\u003e\u003ca href=\"\/products\/pinedrive-256gb-nvme-ssd-2242\"\u003ePinedrive 2242 NVMe SSD\u003c\/a\u003e we stock in the store.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePCIe FPC Bundles now available\u003c\/h3\u003e\n\u003cp\u003eIn case you are thinking about integrating this board into your custom project, don't overlook the optional\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/products\/pcie-fpc-bundle\"\u003ePineboards PCIe FPC Bundle\u003c\/a\u003e. Utilising the 100mm ribbon cable will provide you with added flexibility during the installation process of our boards.\u003c\/p\u003e\n\u003cp\u003eWe now stock an \u003ca title=\"XL PCIe FPC Bundle\" href=\"\/products\/xl-pcie-fpc-bundle\"\u003eXL version of the bundle\u003c\/a\u003e too!\u003c\/p\u003e\n\u003ch2\u003eIt fits our Layer Case!\u003c\/h2\u003e\n\u003cp\u003eThis Lite version of the HatDrive! Top fits perfectly in our \u003ca href=\"\/products\/layer-case-for-raspberry-pi-m-2-hat-active-cooler\" title=\"Layer Case for Raspberry Pi M.2 HAT+ \u0026amp; Active Cooler\"\u003eLayer Case\u003c\/a\u003e:\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/layer_case_for_pineboards_top_hat_lite_1.jpg?v=1718891361\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecially Designed for Raspberry Pi 5:\u003c\/strong\u003e Designed for the latest single-board computer, the Raspberry Pi 5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNVMe Drive Installation Capability:\u003c\/strong\u003e Supports NVMe (M-key) drives in M.2 format sizes 2230 and 2242, facilitating high-speed storage solutions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCIe Interface Support:\u003c\/strong\u003e Compatible with PCIe x1 interface in both Gen2 and Gen3 standards, offering versatile connectivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual LED Indicators:\u003c\/strong\u003e Equipped with 2 LED indicators for power supply voltage (“PWR”) and M.2 disk activity (“ACT”), providing essential operational insights.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Form Factor:\u003c\/strong\u003e Maintains compatibility with original Raspberry Pi HAT dimensions of 65 x 56.50 mm, ensuring a cohesive fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM.2 Standard-Compliant Power System:\u003c\/strong\u003e Integrates a voltage regulator capable of delivering up to 3A for the 3.3V power rail, in compliance with the M.2 (NGFF) standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy and Quick M.2 Disk Installation:\u003c\/strong\u003e Facilitates swift installation of M.2 disks in 2230 or 2242 formats, courtesy of a custom CNC made metal bracket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM.2 Card Power Options:\u003c\/strong\u003e Provides power to the M.2 card directly from the FPC PCIe ribbon or through an alternative power method, adapted for the lite version.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser-Friendly PCB Markings:\u003c\/strong\u003e Features clearly marked PCB for ease of installation and use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Quality Components:\u003c\/strong\u003e Built with premium electronic components and a 4-layer PCB for reliability and performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll Necessary Accessories Included:\u003c\/strong\u003e Includes a dedicated FPC PCIe ribbon, spacer pins, M2.5 screws, and a spacer pin for M.2 card mounting, ensuring a complete setup out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: justify;\"\u003e\u003ca title=\"Pineboards HatDrive! Top Lite Documentation\" href=\"\/blogs\/raspberry-pi-tutorials\/pineboards-hatdrive-top-lite-documentation\"\u003eHatDrive! Top Lite documentation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"How to Update the Firmware on your Raspberry Pi 5\" href=\"\/blogs\/raspberry-pi-tutorials\/how-to-update-the-firmware-on-your-raspberry-pi-5\"\u003eHow to update the Firmware on your Raspberry Pi 5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"How to Flash an NVMe Boot Drive with Raspberry Pi 5\" href=\"\/blogs\/raspberry-pi-tutorials\/how-to-flash-an-nvme-boot-drive-with-raspberry-pi-5\"\u003eHow to flash an NVMe boot drive with Raspberry Pi 5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"How to Update your Raspberry Pi Kernel and Install Kernel Headers\" href=\"\/blogs\/raspberry-pi-tutorials\/how-to-update-your-raspberry-pi-kernel-and-install-kernel-headers\"\u003eHow to update your Raspberry Pi Kernel and install Kernel Headers\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x HatDrive! Top Lite board\u003c\/li\u003e\n\u003cli\u003e1x 25mm PCIe FPC cable with controlled impedance\u003c\/li\u003e\n\u003cli\u003e4x Standoffs\u003c\/li\u003e\n\u003cli\u003e1x M.2 drive standoff\u003c\/li\u003e\n\u003cli\u003e9x M2.5 screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and NVMe device not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Pineboards","offers":[{"title":"Default Title","offer_id":43658219290819,"sku":"105914","price":17.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/hatdrive-top-lite-for-raspberry-pi-5-pineboards-105914-42368271646915.jpg?v=1717693322"},{"product_id":"raspberry-pi-ssd-kit-for-raspberry-pi-5","title":"Raspberry Pi SSD Kit for Raspberry Pi 5","description":"\u003cp\u003eThe Raspberry Pi SSD Kit is a great-value way to grab both the \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"Raspberry Pi SSD\"\u003eRaspberry Pi NVMe SSD\u003c\/a\u003e and \u003ca href=\"\/products\/raspberry-pi-m2-hat-plus\" title=\"Raspberry Pi M.2 HAT+\"\u003eRaspberry Pi M.2 HAT+\u003c\/a\u003e to unlock outstanding performance for I\/O intensive applications on \u003ca title=\"Raspberry Pi 5\" href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e, including super-fast startup when booting from the SSD.\u003c\/p\u003e\n\u003cp\u003eThe kit comes \u003cstrong\u003epre-assembled\u003c\/strong\u003e with the SSD installed into the M.2 HAT+, ready out of the box to connect to your Raspberry Pi 5 (\u003cstrong\u003enot included\u003c\/strong\u003e).\u003c\/p\u003e\n\u003cp\u003eThe kit includes a 16mm stacking header, spacers, and screws to secure to your Pi 5. A\u003ca href=\"\/products\/active-cooler-for-raspberry-pi-5\" title=\"Active Cooler for Raspberry Pi 5\"\u003e Raspberry Pi Active Cooler\u003c\/a\u003e can also be used underneath the HAT at the same time when using these spacers.\u003c\/p\u003e\n\u003cp\u003eThe kit \u003cstrong\u003ecomes with either a 256GB or 512GB SSD pre-installed\u003c\/strong\u003e (select before adding to cart), which offers the following performance when accessed using a 1-lane PCI Express 2.0 bus on Raspberry Pi 5:\u003c\/p\u003e\n\u003ctable width=\"419\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 92.1094px;\" width=\"73\"\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 206.953px;\" width=\"165\"\u003e\u003cstrong\u003eIOPS (4KB random read)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 226.938px;\" width=\"181\"\u003e\u003cstrong\u003eIOPS5 (4KB random write)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 92.1094px;\"\u003e256GB\u003c\/td\u003e\n\u003ctd style=\"width: 206.953px;\"\u003e40k\u003c\/td\u003e\n\u003ctd style=\"width: 226.938px;\"\u003e70k\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 92.1094px;\"\u003e512GB\u003c\/td\u003e\n\u003ctd style=\"width: 206.953px;\"\u003e50k\u003c\/td\u003e\n\u003ctd style=\"width: 226.938px;\"\u003e90k\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and Active Cooler not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSSD + M.2 HAT+ Bundle for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eGreat value when compared to buying the parts separately\u003c\/li\u003e\n\u003cli\u003eChoice of 256GB or 512GB SSD kits\u003c\/li\u003e\n\u003cli\u003eSSD Pre-assembled to the HAT+\u003c\/li\u003e\n\u003cli\u003eStandoffs\/screws included\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5 only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Raspberry Pi SSD Kit product brief\" href=\"https:\/\/datasheets.raspberrypi.com\/ssd\/raspberry-pi-ssd-kit-product-brief.pdf\"\u003eRaspberry Pi SSD Kit Product Brief\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.raspberrypi.com\/news\/raspberry-pi-ssds-and-ssd-kits\/\" title=\"Raspberry Pi SSDs and SSD Kits on sale now\"\u003eRaspberry Pi SSD Kit Announcement Blog Post\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Raspberry Pi SSD product brief\" href=\"https:\/\/datasheets.raspberrypi.com\/ssd\/raspberry-pi-ssd-product-brief.pdf\"\u003eRaspberry Pi SSD Product Brief\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Raspberry Pi M.2 HAT+ product brief\" href=\"https:\/\/datasheets.raspberrypi.com\/m2-hat-plus\/raspberry-pi-m2-hat-plus-product-brief.pdf\"\u003eRaspberry Pi M.2 HAT+ product brief\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Raspberry Pi M.2 HAT+ schematics\" href=\"https:\/\/datasheets.raspberrypi.com\/m2-hat-plus\/raspberry-pi-m2-hat-plus-schematics.pdf\"\u003eRaspberry Pi M.2 HAT+ schematics\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Boot from NVMe with the Raspberry Pi M.2 HAT+\" href=\"https:\/\/www.raspberrypi.com\/documentation\/accessories\/m2-hat-plus.html#boot-from-nvme\"\u003eHow to boot from NVMe with the Raspberry Pi M.2 HAT+\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.raspberrypi.com\/news\/using-m-2-hat-with-raspberry-pi-5\/\" title=\"Using the M.2 HAT+ with Raspberry Pi 5\"\u003eBlog: Using the M.2 HAT+ with Raspberry Pi 5\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eProduct codes:\n\u003cul\u003e\n\u003cli\u003e256GB SSD Kit = Raspberry Pi SC1675 (EAN: 5056561805016)\u003c\/li\u003e\n\u003cli\u003e512GB SSD Kit = Raspberry Pi SC1676 (EAN: 5056561805023)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cp\u003eThe kit comes with the HAT and SSD pre-assembled.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Raspberry Pi M.2 HAT+ (with PCI-E cable)\u003c\/li\u003e\n\u003cli\u003e1x Raspberry Pi NVMe 2230 SSD \u003cstrong\u003e(select capacity option before adding to cart)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x GPIO Stacking Header\u003c\/li\u003e\n\u003cli\u003e1x Nylon Standoff\/Screw set\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raspberry Pi","offers":[{"title":"256GB","offer_id":53621638922625,"sku":"SC1675","price":69.2,"currency_code":"GBP","in_stock":false},{"title":"512GB","offer_id":53621638955393,"sku":"SC1676","price":110.4,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/raspberry-pi-ssd-kit-for-raspberry-pi-5-raspberry-pi-71328322847105.jpg?v=1729609323"},{"product_id":"m-2-module-case-for-raspberry-pi-5","title":"M.2 Module Case for Raspberry Pi 5","description":"\u003cp\u003eThis \u003cstrong\u003ePCIe to M.2\u003c\/strong\u003e module case extends the \u003ca title=\"Raspberry Pi 5\" href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5's\u003c\/a\u003e functions by adding an \u003cstrong\u003eM.2 slot \u003c\/strong\u003evia a PCIe to M.2 adapter, allowing you to add fast \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"Raspberry Pi SSD\"\u003eM.2 NVMe SSD\u003c\/a\u003e storage or other M.2 modules.\u003c\/p\u003e\n\u003cp\u003eIt's wrapped in a tough, well-vented aluminium alloy case with handy mounting options and space for adding HATs, coolers, and internal wiring.\u003c\/p\u003e\n\u003cp\u003eThe case \u003cstrong\u003ealso includes an internal adapter module\u003c\/strong\u003e (on the other side of the Pi) that routes features to where you \u003cem\u003ereally\u003c\/em\u003e need them:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn the rear:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eUSB-C Power Port\u003c\/li\u003e\n\u003cli\u003eDual \u003cstrong\u003efull-size\u003c\/strong\u003e \u003cstrong\u003eHDMI\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePi 5 Gigabit Ethernet Port\u003c\/li\u003e\n\u003cli\u003e2x USB 3.0\u003c\/li\u003e\n\u003cli\u003e2x USB 2.0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn the front:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003ePower button\u003c\/li\u003e\n\u003cli\u003ePower indicator\u003c\/li\u003e\n\u003cli\u003eMicroSD slot\u003c\/li\u003e\n\u003cli\u003eUART debugging port\u003c\/li\u003e\n\u003cli\u003ePluggable power screw terminal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eM.2 Connector\u003c\/strong\u003e (from module)\u003c\/li\u003e\n\u003cli\u003eUART debugging port\u003c\/li\u003e\n\u003cli\u003e5V power output connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe module case also comes with accessories, including cables and connectors - just add your \u003ca title=\"Raspberry Pi 5\" href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e, a \u003ca title=\"27W power supply\" href=\"\/products\/raspberry-pi-27w-usb-c-power-supply\"\u003e27W power supply\u003c\/a\u003e and either a \u003ca title=\"Micro SD card\" href=\"\/products\/noobs-preinstalled-sd-card\"\u003eMicro SD card\u003c\/a\u003e or an \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"Raspberry pi SSD\"\u003eSSD\u003c\/a\u003e in the M.2 slot.\u003c\/p\u003e\n\u003cp\u003eWe also have a \u003ca title=\"4-Channel USB 3.2 Module Case for Raspberry Pi 5\" href=\"\/products\/4-channel-usb-3-2-module-case-for-raspberry-pi-5\"\u003eUSB 3.2\u003c\/a\u003e and a \u003ca title=\"Gigabit Ethernet Module Case for Raspberry Pi 5\" href=\"\/products\/gigabit-ethernet-module-case-for-raspberry-pi-5\"\u003eGigabit Ethernet\u003c\/a\u003e module case in our store.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Raspberry Pi 5 is NOT included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat's on Board\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/M.2_Module_for_Raspberry_Pi_5_features_1.jpg?v=1737722974\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 is not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveshare.com\/wiki\/Pi5-Module-BOX\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/M.2_Module_for_Raspberry_Pi_5_contents_1.jpg?v=1737722975\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e1x Pi5 HDMI and Type-C Adapter\u003c\/li\u003e\n\u003cli\u003e1x \u003cspan\u003ePCIe to M.2 Board\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x Metal Case and White Aluminium Alloy Base Plate\u003c\/li\u003e\n\u003cli\u003e1x Silicone Button\u003c\/li\u003e\n\u003cli\u003e1x PCIe Cable\u003c\/li\u003e\n\u003cli\u003e1x Screw Terminal\u003c\/li\u003e\n\u003cli\u003e1x Screws Pack\u003c\/li\u003e\n\u003cli\u003e1x SH1.0 3-pin Cable\u003c\/li\u003e\n\u003cli\u003e1x SH1.0 3-pin Squid Cable\u003c\/li\u003e\n\u003cli\u003e1x PH2.0 3-pin Cable\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and SSD not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":54000213721473,"sku":"WAV-27833","price":23.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/m-2-module-case-for-raspberry-pi-5-waveshare-wav-27833-73039817212289.jpg?v=1737771421"},{"product_id":"seeed-pcie-3-0-dual-m-2-hat-for-raspberry-pi-5","title":"Seeed PCIe 3.0 Dual M.2 HAT for Raspberry Pi 5","description":"\u003cp\u003eFeaturing a \u003cstrong\u003ePCIe 3.0 switch\u003c\/strong\u003e for faster read\/write speeds, this \u003cstrong\u003ebottom-mounted dual-NVMe\u003c\/strong\u003e add-on for \u003ca title=\"Raspberry Pi 5\" href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e allows you to get the best performance out of \u003ca title=\"NVMe drives\" href=\"\/products\/raspberry-pi-ssd\"\u003eNVMe drives\u003c\/a\u003e and other M.2 modules thanks to the ASMedia ASM2806 PCIe 3.0 switch.\u003c\/p\u003e\n\u003cp\u003eMost \u003ca title=\"M.2 HATs and add-ons for Raspberry Pi 5\" href=\"\/collections\/raspberry-pi-ssd-hats\"\u003eM.2 HATs and add-ons for Raspberry Pi 5\u003c\/a\u003e typically use PCIe 2.0 packet switches. This add-on from Seeed uses the ASMedia ASM2806 PCIe 3.0 switch allowing greater read\/write speeds, an example of which can be seen below.\u003c\/p\u003e\n\u003cp\u003eThe add-on accommodates 2230\/2242\/2260\/2280 M.2 standard-size modules. If booting from NVMe, we strongly recommend updating your firmware and bootloader first, using \u003ca title=\"Raspberry Pi Imager\" rel=\"noopener\" href=\"https:\/\/www.raspberrypi.com\/software\/\" target=\"_blank\"\u003eRaspberry Pi Imager\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: SATA SSDs are not compatible - M.2 NVMe only. Raspberry Pi and SSD are not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003ePerformance Examples\u003c\/h2\u003e\n\u003ch3\u003eSD Boot + SSD Backup\u003c\/h3\u003e\n\u003ctable width=\"421\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"173\"\u003e\u003cstrong\u003eM.2 HAT\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"120\"\u003e\u003cstrong\u003eRead speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"128\"\u003e\u003cstrong\u003eWrite speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCIe 3.0\u003c\/td\u003e\n\u003ctd\u003e822 MB\/s\u003c\/td\u003e\n\u003ctd\u003e716 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCIe 2.0\u003c\/td\u003e\n\u003ctd\u003e431 MB\/s\u003c\/td\u003e\n\u003ctd\u003e389 MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSSD Boot + SSD Backup\u003c\/h3\u003e\n\u003ctable width=\"487\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"109\"\u003e\u003cstrong\u003eM.2 Dual HAT\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"120\"\u003e\u003cstrong\u003eRead \u0026amp; Write\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"128\"\u003e\u003cstrong\u003eWrite \u0026amp; Write\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"130\"\u003e\u003cstrong\u003eRead \u0026amp; Write\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCIe 3.0\u003c\/td\u003e\n\u003ctd\u003eAverage 454MB\/s\u003c\/td\u003e\n\u003ctd\u003eAverage 407MB\/s\u003c\/td\u003e\n\u003ctd\u003e697MB\/s 663MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCIe 2.0\u003c\/td\u003e\n\u003ctd\u003eAverage 234MB\/s\u003c\/td\u003e\n\u003ctd\u003eAverage 214MB\/s\u003c\/td\u003e\n\u003ctd\u003e414MB\/s 324MB\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSSD Boot + Hailo AI Accelerator\u003c\/h3\u003e\n\u003ctable width=\"542\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"109\"\u003e\u003cstrong\u003eM.2 Dual HAT with Hailo8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"90\"\u003e\u003cstrong\u003eRead\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"128\"\u003e\u003cstrong\u003eRead \u0026amp; Hailo8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"79\"\u003e\u003cstrong\u003eWrite\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"136\"\u003e\u003cstrong\u003eWrite \u0026amp; Hailo8\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCIe 3.0\u003c\/td\u003e\n\u003ctd\u003e812MB\/s\u003c\/td\u003e\n\u003ctd\u003e416MB\/s 187FPS\u003c\/td\u003e\n\u003ctd\u003e701MB\/s\u003c\/td\u003e\n\u003ctd\u003e340MB\/s 188FPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCIe 2.0\u003c\/td\u003e\n\u003ctd\u003e429MB\/s\u003c\/td\u003e\n\u003ctd\u003e233MB\/s 128FPS\u003c\/td\u003e\n\u003ctd\u003e373MB\/s\u003c\/td\u003e\n\u003ctd\u003e273MB\/s 111FPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eNote: Hai08L only supports M.2 key B+M.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eNVMe SSD Compatibility\u003c\/h2\u003e\n\u003cp\u003eThere is still no definitive list of compatible NVMe SSDs for Raspberry Pi 5 via PCIe, however, the internet is full of discussions and examples highlighting which drives are likely to work.\u003c\/p\u003e\n\u003cp\u003eAs a result, we always recommend the \u003ca title=\"Raspberry Pi SSD\" href=\"\/products\/raspberry-pi-ssd\"\u003eRaspberry Pi NVMe SSD\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual M.2 Slot with PCIe 3.0 Speed:\u003c\/strong\u003e Uses the ASMedia ASM2806 PCIe 3.0 switch chip, overcoming PCIe 2.0 limitations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable Power Supply:\u003c\/strong\u003e Additional Pogo Pins for extra power supply to ensure a stable high-speed connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Size Support:\u003c\/strong\u003e 2230\/2242\/2260\/2280 M.2 standard size compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack-mounted Design:\u003c\/strong\u003e 40-pin GPIO free to use, compatible with other Pi HATs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser-friendly Design:\u003c\/strong\u003e S-shaped FPC cable does not obstruct the micro SD card\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Source Case:\u003c\/strong\u003e Seeed M.2 hats aren't compatible with the Raspberry Pi official case, so they provide an adapted \u003ca title=\"3D printing case STEP file\" rel=\"noopener\" href=\"https:\/\/files.seeedstudio.com\/wiki\/M.2_Hat\/Seeed%20M.2%20hat%20with%20Pi5%20case_sam-20240827.stp\" target=\"_blank\"\u003e3D printing case STEP file\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"height: 180px;\" width=\"441\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 145.438px;\"\u003e\u003cstrong\u003e\u003cspan data-font-family='\"Microsoft YaHei\"' style=\"font-style: inherit;\"\u003eM.2 Slot\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 285.562px;\"\u003e\u003cspan data-font-family='\"Microsoft YaHei\"' style=\"font-style: inherit; font-weight: inherit;\"\u003e2\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 145.438px;\"\u003e\u003cstrong\u003e\u003cspan data-font-family='\"Microsoft YaHei\"' style=\"font-style: inherit;\"\u003eMax. PCIe Speed\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 285.562px;\"\u003e\u003cspan data-font-family='\"Microsoft YaHei\"' style=\"font-style: inherit; font-weight: inherit;\"\u003ePCIe gen3.0\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 145.438px;\"\u003e\u003cstrong\u003e\u003cspan data-font-family='\"Microsoft YaHei\"' style=\"font-style: inherit;\"\u003ePCIe Switch Chip\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 285.562px;\"\u003e\u003cspan data-font-family='\"Microsoft YaHei\"' style=\"font-style: inherit; font-weight: inherit;\"\u003eASM2806\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 145.438px;\"\u003e\u003cstrong\u003e\u003cspan data-font-family='\"Microsoft YaHei\"' style=\"font-style: inherit;\"\u003eM.2 Size Support\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 285.562px;\"\u003e\u003cspan data-font-family='\"Microsoft YaHei\"' style=\"font-style: inherit; font-weight: inherit;\"\u003e2280\/2260\/2242\/2230\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 54px;\"\u003e\n\u003ctd style=\"height: 54px; width: 145.438px;\"\u003e\u003cstrong\u003e\u003cspan data-font-family='\"Microsoft YaHei\"' style=\"font-style: inherit;\"\u003eMax. Power Supply\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 54px; width: 285.562px;\"\u003e\u003cspan data-font-family='\"Microsoft YaHei\"' style=\"font-style: inherit; font-weight: inherit;\"\u003e5V\/3A\u003cbr\u003eMax 3A: Pogo pin (2A) + PCIe connector (1A)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 145.438px;\"\u003e\u003cstrong\u003e\u003cspan data-font-family='\"Microsoft YaHei\"' style=\"font-style: inherit;\"\u003eCable\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 285.562px;\"\u003e\u003cspan data-font-family='\"Microsoft YaHei\"' style=\"font-style: inherit; font-weight: inherit;\"\u003eFPC\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 145.438px;\"\u003e\u003cstrong\u003e\u003cspan data-font-family='\"Microsoft YaHei\"' style=\"font-style: inherit;\"\u003eAssembly Method\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 285.562px;\"\u003e\u003cspan data-font-family='\"Microsoft YaHei\"' style=\"font-style: inherit; font-weight: inherit;\"\u003eBack installation\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 145.438px; height: 18px;\"\u003e\u003cstrong\u003e\u003cspan data-font-family='\"Microsoft YaHei\"' style=\"font-style: inherit;\"\u003eProduct number\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 285.562px; height: 18px;\"\u003e\u003cspan data-font-family='\"Microsoft YaHei\"' style=\"font-style: inherit; font-weight: inherit;\"\u003eSeeed 103110065\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Product wiki\" rel=\"noopener\" href=\"https:\/\/wiki.seeedstudio.com\/raspberry_pi_5_uses_pcie_hat_dual_hat\/\" target=\"_blank\"\u003eProduct wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"3D printing case STEP file\" rel=\"noopener\" href=\"https:\/\/files.seeedstudio.com\/wiki\/M.2_Hat\/Seeed%20M.2%20hat%20with%20Pi5%20case_sam-20240827.stp\" target=\"_blank\"\u003e3D print case (STEP file)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"ASMedia ASM2806 datasheet\" rel=\"noopener\" href=\"https:\/\/www.asmedia.com.tw\/product\/012Yq70sX2zI9xN5\/7c5YQ79xz8urEGr1\" target=\"_blank\"\u003eASMedia ASM2806 datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x PCIe 3.0 to dual M.2 HAT\u003c\/li\u003e\n\u003cli\u003e2x 50mm FPC cable\u003c\/li\u003e\n\u003cli\u003e1x Screw \u0026amp; stud pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and SSD not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Seeed","offers":[{"title":"Default Title","offer_id":54105395462529,"sku":"106376","price":43.2,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/seeed-pcie-3-0-dual-m-2-hat-for-raspberry-pi-5-seeed-106376-1146615903.jpg?v=1741807037"},{"product_id":"waveshare-dual-channel-m-2-hat-for-raspberry-pi-5","title":"Waveshare Dual-Channel M.2 HAT+ for Raspberry Pi 5","description":"\u003cp\u003eThe \u003ca title=\"Waveshare\" href=\"\/collections\/waveshare\"\u003eWaveshare\u003c\/a\u003e Dual-Channel M.2 HAT+ for \u003ca title=\"Raspberry Pi 5\" href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e adds support for \u003cstrong\u003etwo M.2 NVMe SSDs\u003c\/strong\u003e in Gen2 mode via the Raspberry Pi 5 PCIe interface. It connects directly to the Pi 5's PCIe FPC connector and includes a \u003cstrong\u003ePCIe switch chip for dual-drive support\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eCompatible with M-key M.2 NVMe SSDs in \u003cstrong\u003e2230 and 2242 formats\u003c\/strong\u003e (such as the \u003ca title=\"Raspberry Pi SSD\" href=\"\/products\/raspberry-pi-ssd\"\u003eRaspberry Pi SSD\u003c\/a\u003e), the HAT+ enables high-speed storage expansion for projects requiring rapid local data access or use as a fast boot drive.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eincluded GPIO riser\u003c\/strong\u003e ensures your IO pins remain accessible with the HAT fitted to your Raspberry Pi, along with \u003cstrong\u003emetal standoffs and fixings\u003c\/strong\u003e to secure the HAT to your board. An \u003cstrong\u003eEEPROM\u003c\/strong\u003e is onboard for HAT ID and information.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDual onboard LED activity indicators\u003c\/strong\u003e allow you to monitor the status of each M.2 device, with a separate \u003cstrong\u003epower LED\u003c\/strong\u003e. An \u003cstrong\u003eonboard INA219 power monitoring chip\u003c\/strong\u003e offers the ability to \u003cstrong\u003edetect voltage and current\u003c\/strong\u003e, to monitor the device status and the input 5V voltage status (not 3.3V). The default I2C address is 0x40, however, the addresses can be modified via back resistors to support the stacking of different expansion boards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSDs not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for Raspberry Pi 5:\u003c\/strong\u003e Connects via the PCIe FPC interface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual M.2 NVMe support:\u003c\/strong\u003e Fits two M-key NVMe SSDs in 2230 and 2242 sizes (\u003cstrong\u003eGen2 mode\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCIe switch chip:\u003c\/strong\u003e Enables simultaneous use of both SSDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Raspberry Pi SSD:\u003c\/strong\u003e Supports common M-key NVMe drives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO riser included:\u003c\/strong\u003e Maintains access to Raspberry Pi IO pins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard EEPROM:\u003c\/strong\u003e Stores HAT ID and board information\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINA219 power monitoring chip:\u003c\/strong\u003e Measures current and voltage on the 5V input line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI2C address configurable:\u003c\/strong\u003e Default 0x40; adjustable via back resistors for stacking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED indicators:\u003c\/strong\u003e Separate activity LEDs for each SSD and a power LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware included:\u003c\/strong\u003e Comes with GPIO riser, metal standoffs and fixings, and SSD mounting nuts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Product Wiki\" rel=\"noopener\" href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_2-CH_M.2_HAT+\" target=\"_blank\"\u003eProduct Wiki\u003c\/a\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Assembly\" rel=\"noopener\" href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_2-CH_M.2_HAT+#Hardware_Connection\" target=\"_blank\"\u003eAssembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Setup\" rel=\"noopener\" href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_2-CH_M.2_HAT+#Load\" target=\"_blank\"\u003eSetup\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Booting from NVMe SSD\" rel=\"noopener\" href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_2-CH_M.2_HAT+#Booting_from_NVMe_SSD\" target=\"_blank\"\u003eBooting from NVMe SSD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"NVME Power Monitoring\" rel=\"noopener\" href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_2-CH_M.2_HAT+#NVME_Power_Monitoring\" target=\"_blank\"\u003eNVME Power Monitoring\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"INA219 Datasheet\" rel=\"noopener\" href=\"https:\/\/files.waveshare.com\/wiki\/PCIe-TO-M.2-HAT%2B\/Ina219.pdf\" target=\"_blank\"\u003eINA219 Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Waveshare Dual-Channel M.2 HAT+ for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x GPIO riser header\u003c\/li\u003e\n\u003cli\u003e1x PCIe cable (40mm)\u003c\/li\u003e\n\u003cli\u003e1x Fixing pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSDs not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Waveshare_Dual-Channel_M.2_HAT_for_Raspberry_Pi_5_contents.jpg?v=1749065580\"\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":54367363203457,"sku":"WAV-27480","price":15.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/waveshare-dual-channel-m-2-hat-for-raspberry-pi-5-waveshare-wav-27480-1171573151.jpg?v=1749078556"},{"product_id":"waveshare-m-2-adapter-with-active-cooler-for-raspberry-pi-5","title":"Waveshare M.2 Adapter with Active Cooler for Raspberry Pi 5","description":"\u003cp\u003e\u003cstrong\u003eCombining an\u003c\/strong\u003e \u003cstrong\u003eM.2 NVMe PCIe adapter with an active cooler\u003c\/strong\u003e, this innovative storage and cooling solution from \u003ca title=\"Waveshare\" href=\"\/collections\/waveshare\"\u003eWaveshare\u003c\/a\u003e allows you to run fast NVMe storage\/boot drives whilst also keeping your \u003ca title=\"Raspberry Pi 5\" href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e at the right operating temperature.\u003c\/p\u003e\n\u003cp\u003eThis compact PCIe adapter can accept \u003cstrong\u003e2242\u003c\/strong\u003e \u003cstrong\u003eor 2230 NVMe\u003c\/strong\u003e SSDs and modules, such as the \u003ca title=\"Raspberry Pi SSD\" href=\"\/products\/raspberry-pi-ssd\"\u003eRaspberry Pi SSD\u003c\/a\u003e, with securing nuts\/fixings included to keep your SSD in place. \u003cstrong\u003eOnboard LED indicators\u003c\/strong\u003e show NVMe activity, along with a separate \u003cstrong\u003eLED for power\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe adapter is fixed to an active cooler and \u003cstrong\u003euses the Raspberry Pi 5 cooler mounting holes\u003c\/strong\u003e to attach the entire assembly to your Pi. This \u003cstrong\u003eleaves your Raspberry Pi mounting holes free\u003c\/strong\u003e, and only \u003cstrong\u003euses two GPIO pins for M.2 power (cable included)\u003c\/strong\u003e, keeping the majority of pins free for \u003ca title=\"jumper wires\" href=\"\/products\/thepihuts-jumper-bumper-pack-120pcs-dupont-wire\"\u003ejumper wires\u003c\/a\u003e and other hardware.\u003c\/p\u003e\n\u003cp\u003eThe cooler's fan removes a lot of heat by default, and \u003cstrong\u003ethe fan will only start up when the CPU temperature is at 50°C\u003c\/strong\u003e (default) - however, \u003ca title=\"Fan Control\" rel=\"noopener\" href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_M.2_Board_(E)#Fan_Control\" target=\"_blank\"\u003ethis can be changed in settings\u003c\/a\u003e to your desired trigger temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCIe NVMe + cooling combo:\u003c\/strong\u003e Storage\/boot adapter and active cooler in one unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupports 2230 and 2242 NVMe SSDs:\u003c\/strong\u003e Compatible with NVMe drives such as the Raspberry Pi SSD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecuring hardware included:\u003c\/strong\u003e SSD mount nuts and fixings provided\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED indicators:\u003c\/strong\u003e Shows NVMe activity and power status\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounts using cooler holes:\u003c\/strong\u003e Attaches via Raspberry Pi 5 cooler mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaves Pi mounting holes free:\u003c\/strong\u003e Main board holes are unobstructed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO access:\u003c\/strong\u003e GPIO header is not blocked by the assembly (two pins used for M.2 power)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature-controlled fan:\u003c\/strong\u003e Default 50°C start; adjustable via settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Product Wiki\" rel=\"noopener\" href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_M.2_Board_(E)\" target=\"_blank\"\u003eProduct Wiki\u003c\/a\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Hardware assembly\" rel=\"noopener\" href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_M.2_Board_(E)\" target=\"_blank\"\u003eHardware assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Booting from NVMe SSD\" rel=\"noopener\" href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_M.2_Board_(E)#Booting_from_NVMe_SSD\" target=\"_blank\"\u003eBooting from NVMe SSD\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Fan Control\" rel=\"noopener\" href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_M.2_Board_(E)#Fan_Control\" target=\"_blank\"\u003eFan Control\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Waveshare M.2 Adapter with Active Cooler for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x MX1.25 2-pin cable (for M.2 power)\u003c\/li\u003e\n\u003cli\u003e3x Thermal pads\u003c\/li\u003e\n\u003cli\u003e1x Screws pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Waveshare_M.2_Adapter_with_Active_Cooler_for_Raspberry_Pi_5_contents.jpg?v=1749068946\"\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":54367403213185,"sku":"WAV-28013","price":12.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/waveshare-m-2-adapter-with-active-cooler-for-raspberry-pi-5-waveshare-wav-28013-1171573147.jpg?v=1749078328"},{"product_id":"waveshare-mini-m-2-adapter-for-raspberry-pi-5","title":"Waveshare Mini M.2 Adapter for Raspberry Pi 5","description":"\u003cp\u003eThis mini M.2 adapter for \u003ca title=\"Raspberry Pi 5\" href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e is a compact way to add a PCIe M.2 slot to your Pi 5, supporting \u003cstrong\u003e2230\u003c\/strong\u003e \u003cstrong\u003eand 2242 format M.2 devices\u003c\/strong\u003e such as \u003ca title=\"NVMe SSDs\" href=\"\/products\/raspberry-pi-ssd\"\u003eNVMe SSDs\u003c\/a\u003e, \u003cstrong\u003eGen2 and Gen3 modes\u003c\/strong\u003e, and \u003cstrong\u003ebooting from SSD\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIts small size \u003cstrong\u003ekeeps it out of the way of cooling devices\u003c\/strong\u003e such as the \u003ca title=\"Raspberry Pi Active Cooler\" href=\"\/products\/active-cooler-for-raspberry-pi-5\"\u003eRaspberry Pi Active Cooler\u003c\/a\u003e when fitted, and \u003cstrong\u003eonly partially consumes the GPIO header\u003c\/strong\u003e. \u003cstrong\u003eOnboard LED indicators\u003c\/strong\u003e highlight power status and M.2 activity.\u003c\/p\u003e\n\u003cp\u003eThe adapter \u003cstrong\u003ecomes with a PCIe cable, GPIO extender header and the necessary fixings\u003c\/strong\u003e to mount it to your Raspberry Pi 5.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMini PCIe M.2 adapter for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eSupports NVMe protocol and M.2 solid state drives\u003c\/li\u003e\n\u003cli\u003eSupport PCI-Ex1 Gen2 or Gen3 modes\u003c\/li\u003e\n\u003cli\u003eCompatible with M.2 solid state drive in 2230\/2242 sizes\u003c\/li\u003e\n\u003cli\u003eOnboard LED indicators, with PWR on continuously when powered, and ACT blinking during read\/write\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Product Wiki\" rel=\"noopener\" href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_M.2_MINI\" target=\"_blank\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Waveshare Mini M.2 Adapter for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x 40mm PCIe cable\u003c\/li\u003e\n\u003cli\u003e1x 2x3 GPIO header\u003c\/li\u003e\n\u003cli\u003e1x Screws pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":54389466005889,"sku":"WAV-27580","price":5.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/waveshare-mini-m-2-adapter-for-raspberry-pi-5-waveshare-wav-27580-1173110654.jpg?v=1749776475"},{"product_id":"pcie-m-2-side-adapter-for-raspberry-pi-5","title":"PCIe M.2 Side Adapter for Raspberry Pi 5","description":"\u003cp\u003eThe \u003ca href=\"\/collections\/waveshare\" title=\"Waveshare\"\u003eWaveshare\u003c\/a\u003e PCIe M.2 Side Adapter board for \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e offers a different arrangement to your usual on-top or underneath M.2 HATs, sitting next to the Raspberry Pi 5 rather than on top\/bottom.\u003c\/p\u003e\n\u003cp\u003eThis \u003cstrong\u003eside-on format\u003c\/strong\u003e allows you to use fast \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"NVMe SSDs\"\u003eNVMe SSDs\u003c\/a\u003e whilst keeping hardware off of your Raspberry Pi, allowing \u003cstrong\u003eunrestricted use of HATs\u003c\/strong\u003e, and ensures \u003ca href=\"\/products\/active-cooler-for-raspberry-pi-5\" title=\"Active Cooler for Raspberry Pi 5\"\u003eactive coolers\u003c\/a\u003e\u003cstrong\u003e get the full airflow they need\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe adapter \u003cstrong\u003eaccepts 2230 \/ 2242 \/ 2260 \/ 2280 format M.2 NVMe SSDs\u003c\/strong\u003e, supporting \u003cstrong\u003ePCIe X1 Gen2 or Gen3\u003c\/strong\u003e modes. \u003cstrong\u003eOnboard LED indicators\u003c\/strong\u003e\u003cspan\u003e highlight power status and M.2 activity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe package includes the adapter board, transparent acrylic mounting base, custom PCIe cable, GPIO power cable (for hungry SSDs!) and a fixings pack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSide-mounted PCIe M.2 adapter board for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eMounts alongside the Pi, not above or below – keeps GPIO and cooling unobstructed\u003c\/li\u003e\n\u003cli\u003eCompatible with M.2 NVMe SSDs in 2230, 2242, 2260, and 2280 sizes\u003c\/li\u003e\n\u003cli\u003eSupports PCIe X1 Gen2 and Gen3 modes\u003c\/li\u003e\n\u003cli\u003eOnboard LEDs indicate power status and M.2 activity\u003c\/li\u003e\n\u003cli\u003eIncludes acrylic mounting base and fixings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_M.2_Board_(C)\" rel=\"noopener\" title=\"Product Wiki\" target=\"_blank\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x PCIe M.2 Side Adapter for Raspberry Pi 5 (C)\u003c\/li\u003e\n\u003cli\u003e1x Transparent acrylic mounting plate\u003c\/li\u003e\n\u003cli\u003e1x PH2.0 3-pin power cable - ~5cm\u003c\/li\u003e\n\u003cli\u003e1x Custom PCIe Cable - 50mm\u003c\/li\u003e\n\u003cli\u003e1x Standoff and fixing pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":54398430577025,"sku":"WAV-26785","price":8.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/pcie-m-2-side-adapter-for-raspberry-pi-5-waveshare-wav-26785-1173642686.jpg?v=1750115113"},{"product_id":"pcie-m-2-adapter-board-d-for-raspberry-pi-5","title":"M.2 Adapter Board (D) for Raspberry Pi 5","description":"\u003cp\u003eThis PCIe M.2 add-on board for \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e allows you to run fast \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"M.2 NVMe SSDs\"\u003eM.2 NVMe SSDs\u003c\/a\u003e via the Pi 5's PCIe interface, mounting on top of your Raspberry Pi without blocking or consuming any GPIO pins.\u003c\/p\u003e \u003cp\u003eThe unique design of this M.2 add-on includes a central cut-out to ensure any installed \u003ca href=\"\/products\/active-cooler-for-raspberry-pi-5\" title=\"Active Cooler\"\u003eActive Cooler\u003c\/a\u003e gets the airflow it requires, something often overlooked by alternative solutions.\u003c\/p\u003e \u003cp\u003eThe board is \u003cstrong\u003ecompatible with\u003c\/strong\u003e \u003cstrong\u003e2230 \/ 2242 \/ 2260 \/ 2280 format M.2 NVMe SSDs\u003c\/strong\u003e\u003cspan\u003e, supporting \u003c\/span\u003e\u003cstrong\u003ePCIe X1 Gen2 or Gen3\u003c\/strong\u003e\u003cspan\u003e modes. \u003c\/span\u003e\u003cstrong\u003eOnboard LED indicators\u003c\/strong\u003e\u003cspan\u003e highlight power status and M.2 activity.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eA \u003cstrong\u003e2-pin PH2.0 header\u003c\/strong\u003e also gives you the option to provide additional power to the SSD from your GPIO pins using the \u003cstrong\u003eincluded cable\u003c\/strong\u003e, in case your SSD is high-capacity and requires additional current.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e\u003cstrong\u003eRaspberry Pi and SSD not included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003ePCIe M.2 add-on board for Raspberry Pi 5\u003c\/li\u003e \u003cli\u003eMounts on top of the Pi 5 without blocking GPIO pins\u003c\/li\u003e \u003cli\u003eCentral cut-out allows full airflow to the Raspberry Pi Active Cooler\u003c\/li\u003e \u003cli\u003eCompatible with M.2 NVMe SSDs in 2230, 2242, 2260, and 2280 sizes\u003c\/li\u003e \u003cli\u003eSupports PCIe X1 Gen2 and Gen3 modes\u003c\/li\u003e \u003cli\u003eOnboard LEDs for power and M.2 activity status\u003c\/li\u003e \u003cli\u003eOptional SSD power input via 2-pin PH2.0 header using included GPIO cable\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_M.2_Board_(D)\" title=\"Product Wiki\" target=\"_blank\" rel=\"noopener\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x PCIe M.2 Adapter Board (D) for Raspberry Pi 5\u003c\/li\u003e \u003cli\u003e1x 16-pin PCIe Cable - 40mm\u003c\/li\u003e \u003cli\u003e1x PH2.0 3-pin power cable - ~5cm\u003c\/li\u003e \u003cli\u003e1x Standoff pack\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cspan\u003e\u003cstrong\u003eRaspberry Pi and SSD not included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":54398439063937,"sku":"WAV-27709","price":8.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/pcie-m-2-adapter-board-d-for-raspberry-pi-5-waveshare-wav-27709-1173642679.jpg?v=1750114873"},{"product_id":"pcie-to-m-2-gigabit-ethernet-adapter-for-raspberry-pi-5","title":"M.2 + Gigabit Ethernet Adapter for Raspberry Pi 5","description":"\u003cp\u003e\u003cstrong\u003eA PCIe add-on for Raspberry Pi 5 providing an M.2 slot for NVMe SSDs and a (secondary) Gigabit Ethernet network adapter!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis add-on board connects to your \u003ca title=\"Raspberry Pi 5\" href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e's PCIe interface and provides an \u003cstrong\u003eM.2 slot for 2280 \/ 2260 \/ 2242 \/ 2230 NVMe SSDs\u003c\/strong\u003e (such as the \u003ca title=\"Raspberry Pi SSD\" href=\"\/products\/raspberry-pi-ssd\"\u003eRaspberry Pi SSD\u003c\/a\u003e) and other M.2 devices, alongside a \u003cstrong\u003eGigabit Ethernet port\u003c\/strong\u003e\/network card to use as a \u003cstrong\u003esecondary network interface\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eA Realtek \u003cstrong\u003eRTL8111H high-performance Gigabit Ethernet chip\u003c\/strong\u003e provides the network interface, with the \u003cstrong\u003esunken-style RJ45 port\u003c\/strong\u003e sitting neatly next to the Ethernet port on your Pi 5.\u003c\/p\u003e\n\u003cp\u003eA power monitoring chip has also been included in this board, allowing you to \u003cstrong\u003emonitor the voltage, current draw and power consumption of your M.2 device via a terminal interface\u003c\/strong\u003e (\u003ca title=\"scripts are provided on the Wiki\" rel=\"noopener\" href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_ETH_M.2_HAT+#NVME_power_monitoring\" target=\"_blank\"\u003escripts are provided on the Wiki\u003c\/a\u003e). \u003cstrong\u003eOnboard LED indicators\u003c\/strong\u003e\u003cspan\u003e highlight power status and M.2 activity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe board installs on top of your Raspberry Pi 5, including passing through your GPIO pins via an included riser header to \u003cstrong\u003emaintain full GPIO access\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePCIe add-on board for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eProvides one M.2 slot via PCIe for NVMe SSDs (2230, 2242, 2260, 2280)\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet port via PCIe powered by a Realtek RTL8111H chip\u003c\/li\u003e\n\u003cli\u003eSunken RJ45 port lines up neatly next to the Pi 5’s onboard Ethernet\u003c\/li\u003e\n\u003cli\u003eBuilt-in power monitoring chip for voltage, current, and power readout via terminal\u003c\/li\u003e\n\u003cli\u003eOnboard LED indicators\u003c\/li\u003e\n\u003cli\u003eInstalls on top of the Raspberry Pi 5 without blocking GPIO access\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Product Wiki\" rel=\"noopener\" href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_ETH_M.2_HAT+\" target=\"_blank\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x PCIe to M.2 + Gigabit Ethernet Adapter for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x GPIO riser header\u003c\/li\u003e\n\u003cli\u003e1x PCIe flex cable - 40mm\u003c\/li\u003e\n\u003cli\u003e1x Screws pack\u003c\/li\u003e\n\u003cli\u003e1x SSD mounting screw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":54400956531073,"sku":"WAV-28515","price":21.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/pcie-to-m-2-gigabit-ethernet-adapter-for-raspberry-pi-5-waveshare-wav-28515-1173709035.jpg?v=1750165163"},{"product_id":"2-channel-m-2-hat-for-raspberry-pi-5","title":"2-Channel M.2 HAT+ for Raspberry Pi 5","description":"\u003cp\u003eThis top-mounted \u003cstrong\u003edual-channel\u003c\/strong\u003e \u003cstrong\u003ePCIe M.2 HAT+\u003c\/strong\u003e is designed for \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e, supporting \u003cstrong\u003etwo\u003c\/strong\u003e \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"NVMe M.2 SSDs\"\u003eNVMe M.2 SSDs\u003c\/a\u003e in \u003cstrong\u003e2230, 2242, 2260, and 2280\u003c\/strong\u003e sizes. It connects via the Pi 5’s PCIe interface using a 16-pin cable, and \u003cstrong\u003esupports PCIe x1 Gen2 mode\u003c\/strong\u003e.\u003c\/p\u003e \u003cp\u003eThe adapter enables significantly faster read\/write speeds compared to the Raspberry Pi’s MicroSD card slot and supports booting directly from SSD. It includes \u003cstrong\u003eonboard power monitoring\u003c\/strong\u003e and EEPROM, allowing real-time monitoring of SSD power status for improved stability. Onboard \u003cstrong\u003estatus LEDs\u003c\/strong\u003e indicate power and activity.\u003c\/p\u003e \u003cp\u003eThe board \u003cstrong\u003ecomes with standoffs, fixings and a 40mm PCIe flex cable\u003c\/strong\u003e. Compatible only with NVMe protocol drives and is intended for use with the Raspberry Pi 5 only.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSDs not included.\u003c\/strong\u003e\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eDual-channel M.2 NVMe HAT+\u003c\/li\u003e \u003cli\u003eDesigned for Raspberry Pi 5\u003c\/li\u003e \u003cli\u003eCompatible with 2230 \/ 2242 \/ 2260 \/ 2280 size M.2 drives\u003c\/li\u003e \u003cli\u003eConnects via 16-pin PCIe interface\u003c\/li\u003e \u003cli\u003eSupports PCIe x1 Gen2 mode\u003c\/li\u003e \u003cli\u003eBoot support from NVMe SSD\u003c\/li\u003e \u003cli\u003eOnboard power monitoring chip\u003c\/li\u003e \u003cli\u003eOnboard EEPROM\u003c\/li\u003e \u003cli\u003ePower and activity status LEDs\u003c\/li\u003e \u003cli\u003eSupports only NVMe protocol SSDs\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_2-CH_M.2_HAT+_(B)\" target=\"_blank\" rel=\"noopener\" title=\"Product Wiki\"\u003eProduct Wiki\u003c\/a\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_2-CH_M.2_HAT+_(B)#Hardware_Connection\" target=\"_blank\" rel=\"noopener\" title=\"Assembly\"\u003eAssembly\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_2-CH_M.2_HAT+_(B)#Booting_from_NVMe_SSD\" target=\"_blank\" rel=\"noopener\" title=\"Booting from NVMe SSD\"\u003eBooting from NVMe SSD\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_2-CH_M.2_HAT+_(B)#NVME_Power_Monitoring\" target=\"_blank\" rel=\"noopener\" title=\"NVMe power monitoring\"\u003eNVMe power monitoring\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x 2-Channel M.2 HAT+ for Raspberry Pi 5\u003c\/li\u003e \u003cli\u003e1x GPIO header\u003c\/li\u003e \u003cli\u003e1x 40mm PCIe flex cable\u003c\/li\u003e \u003cli\u003e1x Standoff pack\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSDs not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":54432683491713,"sku":"WAV-27710","price":17.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/2-channel-m-2-hat-for-raspberry-pi-5-waveshare-wav-27710-1175351869.jpg?v=1750964235"},{"product_id":"52pi-m-2-nvme-2280-poe-hat-for-raspberry-pi-5","title":"52Pi M.2 NVMe 2280 PoE+ HAT for Raspberry Pi 5","description":"\u003cp\u003eThe \u003ca href=\"\/collections\/52pi\" title=\"52Pi\"\u003e52Pi\u003c\/a\u003e \u003cstrong\u003eM.2 NVMe 2280 PoE+ HAT\u003c\/strong\u003e is an expansion board for \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e that \u003cstrong\u003ecombines M.2 SSD storage support with Power over Ethernet (PoE+)\u003c\/strong\u003e functionality.\u003c\/p\u003e\n\u003cp\u003eIt allows the Raspberry Pi 5 to be powered directly from an \u003ca href=\"\/products\/2m-network-cable-for-the-raspberry-pi\" title=\"Pure Copper RJ45 Cat5e Ethernet LAN Cable\"\u003eEthernet cable\u003c\/a\u003e using a PoE+ switch or \u003ca title=\"Raspberry Pi PoE+ Injector\" href=\"\/products\/raspberry-pi-poe-injector\"\u003einjector\u003c\/a\u003e, removing the need for a separate power supply, simplifying cabling, especially for those running multiple Raspberry Pi 5 boards..\u003c\/p\u003e\n\u003cp\u003eThis board \u003cstrong\u003esupports M.2 NVMe SSDs in\u003c\/strong\u003e \u003cstrong\u003e2230, 2242, 2260, and 2280\u003c\/strong\u003e sizes via an \u003cstrong\u003eM-key interface -\u003c\/strong\u003e such as the \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"Raspberry Pi SSD\"\u003eRaspberry Pi SSD\u003c\/a\u003e. It \u003cstrong\u003edelivers a 5.1V output at up to 4.5A\u003c\/strong\u003e, providing stable power not just to the Raspberry Pi 5 but also to any attached peripherals. It is designed specifically for compatibility with the Raspberry Pi 5 and includes support for the \u003ca href=\"\/products\/active-cooler-for-raspberry-pi-5\" title=\"Active Cooler\"\u003eActive Cooler\u003c\/a\u003e for thermal management.\u003c\/p\u003e\n\u003cp\u003eInput power is handled over 802.3at (PoE+) up to 25.5W with a power status indicator on the board for immediate feedback.\u003cstrong\u003e When using this HAT, the USB-C power port must not be connected to an additional power source, as this could damage the board.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e52Pi also suggests that this HAT fits within their \u003ca href=\"\/products\/black-aluminum-case-brick-enlosure-with-cooling-fan-heatsink-for-raspberry-pi-5\" title=\"Tall Aluminium Cooling Case\"\u003eZP-0164 Tall Aluminium Cooling Case\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, SSD and Active Cooler not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/qITIZ_ecLNs?si=PA2IBlHkUyG7p3Qc\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eExpansion board for Raspberry Pi 5 with PoE+ and M.2 NVMe SSD support\u003c\/li\u003e\n\u003cli\u003eSupports M.2 NVMe SSDs in 2230 \/ 2242 \/ 2260 \/ 2280 sizes (M-key interface)\u003c\/li\u003e\n\u003cli\u003ePoE+ input via 802.3at (up to 25.5W) for simplified power and cabling\u003c\/li\u003e\n\u003cli\u003e5.1V output at up to 4.5A – powers the Raspberry Pi 5 and connected peripherals\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5 and the official Raspberry Pi 5 Active Cooler\u003c\/li\u003e\n\u003cli\u003eRemoves the need for a separate power supply when used with a PoE+ switch or injector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePoE Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePoE+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eM.2 NVMe M-key\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSSD Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2230 \/ 2242 \/ 2260 \/ 2280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEthernet (PoE+) 802.3at protocol, up to 25.5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.1V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput Current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRaspberry Pi 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDo not connect power to the USB-C port when PoE+ HAT is in use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.52pi.com\/index.php?title=EP-0241\" rel=\"noopener\" title=\"Product Wiki\" target=\"_blank\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.52pi.com\/index.php?title=EP-0241#How_to_assemble_it?\" rel=\"noopener\" title=\"Assembly steps\" target=\"_blank\"\u003eAssembly steps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 52Pi P33 M.2 NVMe 2280 PoE+ HAT\u003c\/li\u003e\n\u003cli\u003e1x 40mm PCIe cable\u003c\/li\u003e\n\u003cli\u003e1x 40-pin GPIO header\u003c\/li\u003e\n\u003cli\u003e1x PoE GPIO header\u003c\/li\u003e\n\u003cli\u003eStandoffs \u0026amp; fixings\u003c\/li\u003e\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, SSD and Active Cooler not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":54447135752577,"sku":"EP-0241","price":28.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/52pi-m-2-nvme-2280-poe-hat-for-raspberry-pi-5-52pi-ep-0241-1176125833.jpg?v=1751389167"},{"product_id":"52pi-m-2-nvme-ssd-usb-adapter-for-raspberry-pi-5","title":"52Pi M.2 NVME SSD USB Adapter for Raspberry Pi 5","description":"\u003cp\u003eThe \u003ca title=\"52Pi\" rel=\"noopener\" href=\"\/collections\/52pi\" target=\"_blank\"\u003e52Pi\u003c\/a\u003e N06 M.2 NVME SSD USB Adapter is a compact \u003cstrong\u003eUSB\u003c\/strong\u003e \u003cstrong\u003estorage\u003c\/strong\u003e \u003cstrong\u003eexpansion\u003c\/strong\u003e \u003cstrong\u003eboard\u003c\/strong\u003e for \u003ca title=\"Raspberry Pi 5\" href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e. It allows direct \u003cstrong\u003econnection of M.2 NVMe SSDs via a USB 3.0 interface\u003c\/strong\u003e, \u003cstrong\u003esupporting 2230, 2242, 2260, and 2280 drive sizes\u003c\/strong\u003e - such as the \u003ca title=\"Raspberry Pi SSD\" href=\"\/products\/raspberry-pi-ssd\"\u003eRaspberry Pi SSD\u003c\/a\u003e. Designed to \u003cstrong\u003emount underneath\u003c\/strong\u003e the Raspberry Pi, it keeps your setup clean with no need for extra cabling or system modifications.\u003c\/p\u003e\n\u003cp\u003eUnlike PCIe-based SSD solutions, \u003cstrong\u003ethis adapter uses USB 3.0 to handle both power and data over a single connection\u003c\/strong\u003e. While PCIe offers higher raw throughput, using USB offers key advantages for certain use cases - such as hot-swapping, simplified power management, or when running OS images from USB without altering the Pi’s PCIe setup.\u003c\/p\u003e\n\u003cp\u003eFor many applications, the \u003cstrong\u003e5 Gbps USB 3.0 bandwidth\u003c\/strong\u003e is more than sufficient; however, if you're after PCIe speeds, \u003ca title=\"Raspberry Pi HATs, pHATS \u0026amp; GPIO\" href=\"\/collections\/raspberry-pi-hats\"\u003echeck out our SSD HAT section for a great range of options to choose from\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThis board is plug-and-play with the Raspberry Pi 5 and doesn’t require additional drivers. It \u003cstrong\u003esupports NVMe SSD capacities up to 4TB (depending on the drive used)\u003c\/strong\u003e and operates within a standard 0–70°C range.\u003c\/p\u003e\n\u003cp\u003eThis adapter \u003cstrong\u003eonly supports NVMe protocol SSDs \u003c\/strong\u003eand is \u003cstrong\u003eintended for use with the included USB converter only.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/4cUTfw6CKxU?si=cfIAe0yj28TvSfSU\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompact USB storage expansion board for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eConnects M.2 NVMe SSDs via USB 3.0 interface\u003c\/li\u003e\n\u003cli\u003eSupports 2230 \/ 2242 \/ 2260 \/ 2280 M.2 NVMe drive sizes\u003c\/li\u003e\n\u003cli\u003eMounts underneath the Raspberry Pi for a tidy setup\u003c\/li\u003e\n\u003cli\u003eUSB 3.0 handles both power and data – no extra cabling required\u003c\/li\u003e\n\u003cli\u003ePlug-and-play with no drivers or system changes needed\u003c\/li\u003e\n\u003cli\u003eIdeal for hot-swapping, USB boot setups, and simplified power management\u003c\/li\u003e\n\u003cli\u003eSupports SSD capacities up to 4TB (drive dependent)\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0°C to 70°C\u003c\/li\u003e\n\u003cli\u003eNote: NVMe SSDs only. For PCIe options, see our SSD HAT section\u003c\/li\u003e\n\u003cli\u003eIncludes USB converter – Raspberry Pi and SSD not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm Factor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eM.2 NVMe SSD Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e 3.0 Type-A to M.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSSD Sizes Supported\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2230, 2242, 2260, 2280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eData Transfer Rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to the maximum speed supported by USB 3.0 (5 Gbps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0°C to 70°C (32°F to 158°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage Capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVaries depending on the SSD used (up to 4TB as per current SSD offerings)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePowered through USB 3.0 connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Product Wiki\" rel=\"noopener\" href=\"https:\/\/wiki.52pi.com\/index.php?title=EP-0239\" target=\"_blank\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Assembly\" rel=\"noopener\" href=\"https:\/\/wiki.52pi.com\/index.php?title=EP-0239#How_to_assemble_it?\" target=\"_blank\"\u003eAssembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x N06 M.2 NVME SSD USB Adapter\u003c\/li\u003e\n\u003cli\u003e1x USB 3.0 Connector\u003c\/li\u003e\n\u003cli\u003eStandoffs and fixings\u003c\/li\u003e\n\u003cli\u003e1x Screwdriver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":54447370994049,"sku":"EP-0239","price":19.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/52pi-m-2-nvme-ssd-usb-adapter-for-raspberry-pi-5-52pi-ep-0239-1176125822.jpg?v=1751389036"},{"product_id":"52pi-m-2-nvme-m-key-poe-hat-for-raspberry-pi-5","title":"52Pi M.2 NVME M-Key PoE+ HAT for Raspberry Pi 5","description":"\u003cp\u003eThe \u003ca href=\"\/collections\/52pi\" title=\"52Pi\"\u003e52Pi\u003c\/a\u003e M.2 NVMe PoE+ HAT is designed for \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e, \u003cstrong\u003ecombining high-speed NVMe M-Key storage support\u003c\/strong\u003e \u003cstrong\u003ewith Power over Ethernet\u003c\/strong\u003e functionality. It provides a direct \u003cstrong\u003ePCIe M-key interfac\u003c\/strong\u003ee for connecting \u003cstrong\u003e2230 or 2242-format NVMe SSDs\u003c\/strong\u003e, such as the \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"Raspberry Pi SSD\"\u003eRaspberry Pi SSD\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePower is delivered via the \u003cstrong\u003e802.3at PoE+\u003c\/strong\u003e standard, allowing the Raspberry Pi 5 and the connected SSD to be powered entirely through an \u003ca href=\"\/products\/2m-network-cable-for-the-raspberry-pi\" title=\"Ethernet cable\"\u003eEthernet cable\u003c\/a\u003e - ideal for compact, cable-free deployments. \u003cstrong\u003ePoE supports up to 25W a\u003c\/strong\u003et\u003cstrong\u003e 5.1V\/4.5A\u003c\/strong\u003e when used with a compatible 802.3at PoE switch or \u003ca href=\"\/products\/raspberry-pi-poe-injector\" title=\"Raspberry Pi PoE+ Injector\"\u003einjector\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant: Do not connect power to the Pi 5's USB-C port while this PoE+ HAT is in use, as it may cause damage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupports M.2 NVMe SSDs for fast data storage\u003c\/li\u003e\n\u003cli\u003ePCIe M.2 interface for direct connection to Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eCompatible with 2230 or 2242-size SSDs\u003c\/li\u003e\n\u003cli\u003ePower over Ethernet (PoE+)\n\u003cul\u003e\n\u003cli\u003eRequires 802.3at PoE switch for full 30W input\u003c\/li\u003e\n\u003cli\u003eDelivers up to 25W at 5.1V\/4.5A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower status LED indicator\u003c\/li\u003e\n\u003cli\u003eDesigned for use with Raspberry Pi 5 only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"height: 180px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 253.828px;\"\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 489.359px;\"\u003eM.2 PCIe NVMe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 253.828px;\"\u003e\u003cstrong\u003eForm Factor Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 489.359px;\"\u003e2230\/2242\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 253.828px;\"\u003e\u003cstrong\u003eHost CPU Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 489.359px;\"\u003eRaspberry Pi 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 253.828px;\"\u003e\u003cstrong\u003ePoE+ (Power over Ethernet) Support\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 489.359px;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 253.828px;\"\u003e\u003cstrong\u003ePoE+ Standard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 489.359px;\"\u003e802.3at (requires 802.3at PoE switch for full power delivery)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 253.828px;\"\u003e\u003cstrong\u003eMaximum Power Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 489.359px;\"\u003e25W at 5.1V\/4.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 253.828px;\"\u003e\u003cstrong\u003eSSD Interface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 489.359px;\"\u003ePCIe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 253.828px;\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 489.359px;\"\u003e0–80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 253.828px;\"\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 489.359px;\"\u003eRequires a PoE switch capable of delivering up to 30W for full functionality\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.52pi.com\/index.php?title=EP-0240\" rel=\"noopener\" title=\"Product Wiki\" target=\"_blank\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.52pi.com\/index.php?title=EP-0240#How_to_assemble_it?\" rel=\"noopener\" title=\"Assembly\" target=\"_blank\"\u003eAssembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 52Pi M.2 NVME M-Key PoE+ HAT\u003c\/li\u003e\n\u003cli\u003e1x 40m PCIe flex cable\u003c\/li\u003e\n\u003cli\u003e1x 40-pin GPIO header\u003c\/li\u003e\n\u003cli\u003e1x PoE header\u003c\/li\u003e\n\u003cli\u003eStandoffs and fixings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":54447427518849,"sku":"EP-0240","price":29.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/52pi-m-2-nvme-m-key-poe-hat-for-raspberry-pi-5-52pi-ep-0240-1176137986.jpg?v=1751396363"},{"product_id":"52pi-tiny-m-2-pcie-adapter-for-raspberry-pi-5","title":"52Pi Tiny M.2 PCIe Adapter for Raspberry Pi 5","description":"\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAww cute!\u003c\/em\u003e \u003c\/strong\u003eThis little fella is \u003ca href=\"\/collections\/52pi\" title=\"52Pi\"\u003e52Pi's\u003c\/a\u003e \u003cstrong\u003eTiny M.2 PCIe Adapter\u003c\/strong\u003e for \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e - a super-compact (56mm x 23mm) expansion board which enables direct connection of 2230 or 2242-format M.2 NVMe SSDs, offering high-speed storage\u003cstrong\u003e through the Pi 5's PCIe interface\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe board \u003cstrong\u003esupports M-Key NVMe SSDs in\u003c\/strong\u003e \u003cstrong\u003e2242 and 2230\u003c\/strong\u003e form factors, which pretty much cover the surface of the board once fitted \u003cem\u003e(it's that small!)\u003c\/em\u003e.\u003c\/p\u003e\n\u003cp\u003eThe shape of the board means your \u003cstrong\u003eGPIO pins are completely unrestricted\u003c\/strong\u003e, and 52Pi also managed to find some room on the board for a small \u003cstrong\u003eactivity LED indicator\u003c\/strong\u003e showing SSD activity.\u003c\/p\u003e\n\u003cp\u003eIt comes with a PCIe cable, standoffs, fixings and M.2 nuts\/screws - just add your Raspberry Pi 5 and an \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"NVMe SSD\"\u003eNVMe SSD\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/c1_mVZz8meU?si=hfSzbd6bfHSWj7Uy\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eSupports M.2 NVMe SSDs (M-key)\n\u003cul\u003e\n\u003cli\u003eFits 2242 and 2230 SSD form factors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePCIe interface for high-speed data transfer\u003c\/li\u003e\n\u003cli\u003eWorks with Raspberry Pi OS\u003c\/li\u003e\n\u003cli\u003e56mm x 23mm\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eCute!\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.52pi.com\/index.php?title=EP-0229\" rel=\"noopener\" title=\"Product Wiki\" target=\"_blank\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.52pi.com\/index.php?title=EP-0229#How_to_assemble_it?\" rel=\"noopener\" title=\"Assembly\" target=\"_blank\"\u003eAssembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 52Pi N10 Tiny M.2 PCIe Adapter for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e2x PCIe FFC cable (40mm)\u003c\/li\u003e\n\u003cli\u003e4x M2.5x4mm Screw\u003c\/li\u003e\n\u003cli\u003e2x M2.5x17mm Copper pillar\u003c\/li\u003e\n\u003cli\u003e1x M2x3mm Screw (for fixing SSD)\u003c\/li\u003e\n\u003cli\u003e1x M2x3mm Copper pillar (Spacer for 2230 SSD)\u003c\/li\u003e\n\u003cli\u003e2x M2x2mm Screw\u003c\/li\u003e\n\u003cli\u003e1x Screw driver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":54447757623681,"sku":"EP-0229","price":11.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/52pi-tiny-m-2-pcie-adapter-for-raspberry-pi-5-52pi-ep-0229-1176150762.jpg?v=1751403552"},{"product_id":"uctronics-m-2-to-pcie-adapter-for-raspberry-pi","title":"Uctronics M.2 to PCIe Adapter for Raspberry Pi","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAdd high-speed NVMe storage to your Raspberry Pi 5 with this compact PCIe adapter. Supports 2230, 2242, and 2280 NVMe SSDs, fits neatly under the Pi, and works with the official Active Cooler.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe Uctronics M.2 NVMe to PCIe Adapter for Raspberry Pi provides the ability to add high-speed NVMe storage to your \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e, supporting \u003cstrong\u003e2230, 2242, and 2280\u003c\/strong\u003e size \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"NVMe SSDs\"\u003eNVMe SSDs\u003c\/a\u003e with full PCIe Gen2\/Gen3 compatibility. Its low-profile design fits neatly \u003cstrong\u003eunderneath\u003c\/strong\u003e the Pi, keeping GPIO headers accessible for other peripherals, using pogo pins for additional power where required.\u003c\/p\u003e\n\u003cp\u003eWhilst \u003cstrong\u003eprimarily designed for use with the \u003ca href=\"\/products\/uctronics-rack-pro-for-pi-5-19-1u-rack-mount-with-4x-m-2-bases-and-lcds\" title=\"Uctronics Rack Pro\"\u003eUctronics Rack Pro\u003c\/a\u003e\u003c\/strong\u003e, they can be used standalone.\u003c\/p\u003e\n\u003cp\u003eThermal management is handled through support for both the official \u003ca href=\"\/products\/active-cooler-for-raspberry-pi-5\" title=\"Raspberry Pi Active Cooler\"\u003eRaspberry Pi Active Cooler\u003c\/a\u003e and a range of third-party cooling solutions. A high-quality FFC PCIe ribbon cable is included for connectivity, with up to 5W power delivery supported directly via the cable. An official \u003ca href=\"\/collections\/raspberry-pi-psus\/compatible-with_raspberry-pi-5\" title=\"Raspberry Pi PSUs\"\u003e27W or 45W USB-C PD power supply\u003c\/a\u003e is recommended for best results.\u003c\/p\u003e\n\u003cp\u003eThis adapter is compatible only with M.2 NVMe SSDs and \u003cstrong\u003edoes not support SATA, PCIe AHCI, or other non-NVMe formats\u003c\/strong\u003e. Some SSDs with Phison controllers, including certain WD models, may not support booting from NVMe on Raspberry Pi.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and SSD not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdds high-speed M.2 interface to Raspberry Pi 5 via PCIe\u003c\/li\u003e\n\u003cli\u003eSupports M.2 NVMe SSDs in 2230, 2242, and 2280 sizes\u003c\/li\u003e\n\u003cli\u003eCompatible with PCIe Gen2 and Gen3 NVMe drives\u003c\/li\u003e\n\u003cli\u003eLow-profile design fits underneath Raspberry Pi 5 while maintaining GPIO access\u003c\/li\u003e\n\u003cli\u003eProvides additional power via pogo pins when required\u003c\/li\u003e\n\u003cli\u003eSupports the official Raspberry Pi Active Cooler\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eOLED and Switch interface headers are designed for the Uctronics Rack Pro only\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eUse either the USB-C port on the board, or your Pi 5's port - do not use both at the same time!\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/UCTRONICS\/SKU_RM0004\/blob\/main\/data\/NVMe_User_Guide.md\" rel=\"noopener noreferrer\" title=\"How to burn image to NVMe and boot from NVMe\" target=\"_blank\"\u003eHow to burn an image to NVMe and boot from NVMe\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x M.2 NVME Adapter\u003c\/li\u003e\n\u003cli\u003e1x PCIe FFC Cable\u003c\/li\u003e\n\u003cli\u003e1x Screw Pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and SSD not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Uctronics","offers":[{"title":"Default Title","offer_id":54513292771713,"sku":"U6285","price":15.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/uctronics-m-2-to-pcie-adapter-for-raspberry-pi-uctronics-u6285-1181022366.jpg?v=1753369049"},{"product_id":"suptronics-x1001-nvme-add-on-for-raspberry-pi-5","title":"SupTronics X1001 NVMe Add-on for Raspberry Pi 5","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe SupTronics X1001 NVMe SSD Add-on for Raspberry Pi 5 supports 2280\/2260\/2242\/2230 SSDs over PCIe 2.0\/3.0 with speeds up to 8Gbps. Designed to fit with the official Active Cooler, it includes mounting hardware, an activity LED, and supports SSD booting.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eIntroducing the \u003ca title=\"SupTronics\" href=\"\/collections\/suptronics\"\u003eSupTronics\u003c\/a\u003e \u003cstrong\u003eX1001\u003c\/strong\u003e NVMe SSD Add-on, a convenient and efficient solution to enhance your \u003ca title=\"Raspberry Pi 5\" href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e storage capabilities.\u003c\/p\u003e\n\u003cp\u003eWith its compact design, this shield allows for easy attachment of various \u003ca title=\"M.2 SSD\" href=\"\/products\/raspberry-pi-ssd\"\u003eM.2 NVMe SSD\u003c\/a\u003e lengths (including \u003cstrong\u003e2280\u003c\/strong\u003e, \u003cstrong\u003e2260\u003c\/strong\u003e, \u003cstrong\u003e2242\u003c\/strong\u003e, and \u003cstrong\u003e2230\u003c\/strong\u003e) to your Pi 5.\u003c\/p\u003e\n\u003cp\u003eEquipped with a PCIe 2.0\/3.0 interface, the X1001 offers lightning-fast data transfer speeds of up to 8Gbps, enabling you to transfer large amounts of data within seconds. Its compatibility with the \u003ca title=\"Raspberry Pi Active Cooler\" href=\"\/products\/active-cooler-for-raspberry-pi-5\"\u003eRaspberry Pi Active Cooler\u003c\/a\u003e ensures optimal heat dissipation without compromising performance. The inclusion of mounting holes and standoffs provides added protection for your drives while effectively dissipating heat.\u003c\/p\u003e\n\u003cp\u003eWith the X1001, you no longer need to guess the reading or writing status of your SSD, as it features a \u003cstrong\u003ebuilt-in LED\u003c\/strong\u003e light that indicates the current activity. This makes it easier for you to monitor your SSD's performance.\u003c\/p\u003e\n\u003cp\u003eThe X1001 supports operating system booting from your SSD, resulting in faster application launches, web serving, and file copying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSSD, Raspberry Pi and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eSupports high-capacity M.2 NVMe solid-state drives up to 4TB\u003c\/li\u003e\n\u003cli\u003eAccommodates 2280, 2260, 2242, and 2230 M.2 NVMe SSD form factors\u003c\/li\u003e\n\u003cli\u003eOffers fast data transfer speeds with PCIe 2.0 5Gbps \/ PCIe 3.0 8Gbps\u003c\/li\u003e\n\u003cli\u003eCompatible with the official active cooler\u003c\/li\u003e\n\u003cli\u003eBlue LED indicator displays power and drive status\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency DC\/DC step-down converter, providing up to 3.5A of power for your SSD\u003c\/li\u003e\n\u003cli\u003eCan be stacked on top of other HATs with the use of an extended female header\u003c\/li\u003e\n\u003cli\u003eIncludes an additional 2-pin XH2.54 connector for optional extra 5V power input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5Vdc +\/-5% power via FFC, converted to 3.3V max 3.5A to power the SSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePorts \u0026amp; Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePCIe connector - 16-pin pitch 0.5mm\u003cbr\u003eSSD connector - M.2 M-Key\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCIe cable length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCB Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e87mm x 56mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Software setup\/tutorials\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x100x-v1.0_software.html\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Hardware information and assembly\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1001-v1.1_hardware.html\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNVMe SSD Incompatibility List\u003c\/h3\u003e\n\u003cp\u003eWe recommend refraining from using the following NVMe SSD drives, which are equipped with a Phison controller due to their proven incompatibility:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWD Blue SN550\/SN580 series\u003c\/li\u003e\n\u003cli\u003eWD Green SN350 series\u003c\/li\u003e\n\u003cli\u003eWD Black SN850 series\u003c\/li\u003e\n\u003cli\u003eOther NVMe SSD drivers equipped with the same Phison controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese specific models have demonstrated compatibility issues, and it is advisable to avoid them when considering NVMe SSD options for X10xx series NVMe add-ons. By steering clear of these drives, users can ensure a smoother and more reliable experience with their storage solutions.\u003c\/p\u003e\n\u003cp\u003eA few other notes re SSD compatibility:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with M.2 NVMe SSDs\u003c\/li\u003e\n\u003cli\u003eNot compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices\u003c\/li\u003e\n\u003cli\u003eOlder NVMe drives with less efficient flash media may not perform as well as newer drives\u003c\/li\u003e\n\u003cli\u003eNew NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they can be accessed in the Explorer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x X1001 V1.1 NVMe shield\u003c\/li\u003e\n\u003cli\u003e1x 30mm PCIe cable\u003c\/li\u003e\n\u003cli\u003e1x Screw pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSSD, Raspberry Pi and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":54563194306945,"sku":"X1001","price":7.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1001-nvme-add-on-for-raspberry-pi-5-suptronics-x1001-1182610970.jpg?v=1754067683"},{"product_id":"suptronics-x1003-nvme-ssd-add-on","title":"SupTronics X1003 NVMe Add-on for Raspberry Pi 5","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe SupTronics X1003 NVMe SSD Add-on for Raspberry Pi 5 fits neatly inside the official Pi 5 case and supports 2230 and 2242 SSDs via PCIe 2.0\/3.0. Offers 8Gbps transfer speeds, SSD boot support, LED activity indicator, and mounts with the official Active Cooler.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eIntroducing the \u003ca href=\"\/products\/suptronics-x1001-nvme-add-on-for-raspberry-pi-5\" title=\"SupTronics\"\u003eSupTronics\u003c\/a\u003e \u003cstrong\u003eX1003\u003c\/strong\u003e NVMe SSD Add-on, the perfect solution for expanding storage capacity and enhancing performance for your \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e. With its ultra-compact design, this add-on allows you to install the SSD inside the official \u003ca href=\"\/products\/raspberry-pi-5-case\" title=\"Raspberry Pi 5 case\"\u003eRaspberry Pi 5 case\u003c\/a\u003e, providing both protection and a minimal, compact appearance.\u003c\/p\u003e\n\u003cp\u003eThe X1003 supports two \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"M.2 NVMe SSD\"\u003eM.2 NVMe SSD\u003c\/a\u003e form factors: \u003cstrong\u003e2242\u003c\/strong\u003e and \u003cstrong\u003e2230\u003c\/strong\u003e. Its PCIe 2.0\/3.0 interface ensures lightning-fast data transfer speeds of up to 8Gbps, enabling you to transfer large amounts of data within seconds. Additionally, it integrates with the \u003ca href=\"\/products\/active-cooler-for-raspberry-pi-5\" title=\"Raspberry Pi Active Cooler\"\u003eRaspberry Pi Active Cooler\u003c\/a\u003e. The inclusion of mounting holes and standoffs provides added protection for your drives while effectively dissipating heat. The \u003cstrong\u003ebuilt-in LED\u003c\/strong\u003e light indicates the current reading or writing status.\u003c\/p\u003e\n\u003cp\u003eThe X1003 supports operating system booting from your SSD, resulting in faster application launches, web serving, and file copying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSSD, Raspberry Pi, Active Cooler and case not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible With Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eCan be installed inside the official Raspberry Pi 5 case\u003c\/li\u003e\n\u003cli\u003eSupports high-capacity M.2 NVMe solid-state drives up to 4TB\u003c\/li\u003e\n\u003cli\u003eSupports two M.2 NVMe SSD form factors: 2242, 2230\u003c\/li\u003e\n\u003cli\u003eSupports PCIe 2.0 5Gbps \/ PCIe 3.0 8Gbps\u003c\/li\u003e\n\u003cli\u003eBlue LED indicator displays power and drive status\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency DC\/DC step-down converter, providing up to 3.5A of power for your SSD\u003c\/li\u003e\n\u003cli\u003ePowering via both GPIO pin header and FFC, ensuring a sufficient power supply\u003c\/li\u003e\n\u003cli\u003eCompatible with the Raspberry Pi Active Cooler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5Vdc ±5% power via GPIO pin header and FFC, converted to 3.3V max 3.5A to power the SSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\"\u003e\u003cstrong\u003ePorts \u0026amp; connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePCIe connector – 16-pin pitch 0.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSSD connector – M.2 M-Key\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCIe cable length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCB size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e55mm × 54.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x100x-v1.0_software.html\" rel=\"noopener\" title=\"Software setup\/tutorials\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1003-v1.3_hardware.html\" rel=\"noopener\" title=\"Hardware information and assembly\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNVMe SSD Incompatibility List\u003c\/h3\u003e\n\u003cp\u003eWe recommend refraining from using the following NVMe SSD drives, which are equipped with a Phison controller due to their proven incompatibility:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWD Blue SN550\/SN580 series\u003c\/li\u003e\n\u003cli\u003eWD Green SN350 series\u003c\/li\u003e\n\u003cli\u003eWD Black SN850 series\u003c\/li\u003e\n\u003cli\u003eOther NVMe SSD drivers equipped with the same Phison controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese specific models have demonstrated compatibility issues, and it is advisable to avoid them when considering NVMe SSD options for X10xx series NVMe add-ons. By steering clear of these drives, users can ensure a smoother and more reliable experience with their storage solutions.\u003c\/p\u003e\n\u003cp\u003eA few other notes re SSD compatibility:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with M.2 NVMe SSDs\u003c\/li\u003e\n\u003cli\u003eNot compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices\u003c\/li\u003e\n\u003cli\u003eOlder NVMe drives with less efficient flash media may not perform as well as newer drives\u003c\/li\u003e\n\u003cli\u003eNew NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they can be accessed in the Explorer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x X1003 V1.1 NVMe shield\u003c\/li\u003e\n\u003cli\u003e1x 22mm PCIe cable\u003c\/li\u003e\n\u003cli\u003e1x Screw pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSSD, Raspberry Pi, Active Cooler and case not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":54563390718337,"sku":"X1003","price":5.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1003-nvme-add-on-for-raspberry-pi-5-suptronics-x1003-1182610961.jpg?v=1754067556"},{"product_id":"suptronics-x1004-dual-nvme-add-on-for-raspberry-pi-5","title":"SupTronics X1004 Dual NVMe Add-on for Raspberry Pi 5","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe SupTronics X1004 Dual NVMe SSD Add-on for Raspberry Pi 5 supports two full-size 2280 SSDs over PCIe 2.0 with 5Gbps speeds. Mounts like a HAT with GPIO passthrough, works with the official Active Cooler, and includes an activity LED.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eIntroducing the \u003ca href=\"\/collections\/suptronics\" title=\"SupTronics\"\u003eSupTronics\u003c\/a\u003e \u003cstrong\u003eX1004\u003c\/strong\u003e Dual NVMe SSD Add-on, a high-speed storage solution for your \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e. Its compact design enables easy \u003cstrong\u003eattachment of \u003cspan style=\"text-decoration: underline;\"\u003etwo\u003c\/span\u003e full-size M.2 2280 SSDs\u003c\/strong\u003e to your Raspberry Pi 5. With its PCIe 2.0 interface, you can experience data transfer rates of up to 5Gbps, allowing you to effortlessly transfer large amounts of data within seconds.\u003c\/p\u003e\n\u003cp\u003eThe X1004 is specifically designed to be placed on top of the Raspberry Pi 5, similar to a traditional HAT, and it provides a 40-pin header for easy access to the GPIO. With this NVMe add-on, you can still use your favourite \u003ca href=\"\/collections\/raspberry-pi-hats\" title=\"HATs\"\u003eHATs\u003c\/a\u003e alongside it, and it is fully compatible with the \u003ca href=\"\/products\/active-cooler-for-raspberry-pi-5\" title=\"Raspberry Pi Active Cooler\"\u003eRaspberry Pi Active Cooler\u003c\/a\u003e. The inclusion of mounting holes and standoffs not only protects the drives but also effectively dissipates heat for reliable performance. The\u003cstrong\u003e built-in LED\u003c\/strong\u003e light indicates the status of reading or writing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSSD, Raspberry Pi and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eSupports a total of 8TB storage capacity (4TB+4TB) with M.2 NVMe solid-state drives\u003c\/li\u003e\n\u003cli\u003eAccommodates two full-size 2280 NVMe SSDs\u003c\/li\u003e\n\u003cli\u003eSupports PCIe 2.0 5Gbps\u003c\/li\u003e\n\u003cli\u003eCompatible with the Raspberry Pi Active Cooler\u003c\/li\u003e\n\u003cli\u003eLED indicators for power and drive status\u003c\/li\u003e\n\u003cli\u003eHigh-performance PCIe packet switch\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency DC\/DC step-down converters, delivering a maximum of 3.5A+3.5A to power your SSDs\u003c\/li\u003e\n\u003cli\u003eDesigned to be attached on top, allowing stacking with other HATs\u003c\/li\u003e\n\u003cli\u003ePowered via the 40-pin GPIO header \u0026amp; PCIe FFC\u003c\/li\u003e\n\u003cli\u003eCompatible with the HAT+ STANDBY power state, automatically turning off when the Pi 5 shuts down\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5Vdc ±5% power via FFC \u0026amp; 40-pin header, converted to 3.3V max 3.5A + 3.5A to power the SSDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\"\u003e\u003cstrong\u003ePorts \u0026amp; connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePCIe connector – 16-pin pitch 0.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSSD connector – M.2 M-Key\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCIe cable length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCB size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e87mm × 57mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1004-v1.1_software.html\" rel=\"noopener\" title=\"Software setup\/tutorials\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1004-v1.1_hardware.html\" rel=\"noopener\" title=\"Hardware information and assembly\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNVMe SSD Incompatibility List\u003c\/h3\u003e\n\u003cp\u003eWe recommend refraining from using the following NVMe SSD drives, which are equipped with a Phison controller due to their proven incompatibility:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWD Blue SN550\/SN580 series\u003c\/li\u003e\n\u003cli\u003eWD Green SN350 series\u003c\/li\u003e\n\u003cli\u003eWD Black SN850 series\u003c\/li\u003e\n\u003cli\u003eOther NVMe SSD drivers equipped with the same Phison controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese specific models have demonstrated compatibility issues, and it is advisable to avoid them when considering NVMe SSD options for X10xx series NVMe add-ons. By steering clear of these drives, users can ensure a smoother and more reliable experience with their storage solutions.\u003c\/p\u003e\n\u003cp\u003eA few other notes re SSD compatibility:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with M.2 NVMe SSDs\u003c\/li\u003e\n\u003cli\u003eNot compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices\u003c\/li\u003e\n\u003cli\u003eOlder NVMe drives with less efficient flash media may not perform as well as newer drives\u003c\/li\u003e\n\u003cli\u003eNew NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they can be accessed in the Explorer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x X1004 V1.1 NVMe shield\u003c\/li\u003e\n\u003cli\u003e1x 30mm PCIe cable\u003c\/li\u003e\n\u003cli\u003e1x Screw pack\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":54563821191553,"sku":"X1004","price":26.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1004-dual-nvme-add-on-for-raspberry-pi-5-suptronics-x1004-1182610955.jpg?v=1754067439"},{"product_id":"suptronics-x1006-sata-nvme-expansion-for-raspberry-pi-5","title":"SupTronics X1006 2.5\" SATA + M.2 SATA Expansion for Raspberry Pi 5","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe SupTronics X1006 2-Port 2.5\"+ M.2 SATA Expansion for Raspberry Pi 5 supports one 2.5\" SATA SSD\/HDD and one M.2 2280 SATA SSD at up to 5Gbps via PCIe. Fits under the Pi 5, preserves GPIO access, and powers from pogo pins.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eIntroducing the \u003ca href=\"\/collections\/suptronics\" title=\"SupTronics\"\u003eSupTronics\u003c\/a\u003e \u003cstrong\u003eX1006\u003c\/strong\u003e \u003cstrong\u003e2-port (2.5\" SATA + M.2 SATA) \u003c\/strong\u003eExpansion, designed to provide a mass-capacity data storage and high-speed storage solution via PCIe, for your \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: does not currently support booting from SSD with the existing firmware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis board facilitates the \u003cstrong\u003esimultaneous connection of a \u003c\/strong\u003e\u003ca href=\"\/products\/wd-green-240gb-2-5-ssd\" title='WD Green 240GB 2.5\" SSD'\u003e2.5\" SATA SSD\u003c\/a\u003e\u003cstrong\u003e (or HDD) and an M.2 2280 SATA SSD \u003cspan style=\"text-decoration: underline;\"\u003e(NOT NVMe)\u003c\/span\u003e\u003c\/strong\u003e, unleashing the full potential of your storage capabilities, with SATA 3.0 interface speeds reaching up to 5Gbps \u003cem\u003e- allowing you to use those SATA drives you have lying around!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe X1006 connects to the underside of the Raspberry Pi 5, eliminating the need for a passthrough for the GPIO. This means you can use your favourite \u003ca href=\"\/collections\/raspberry-pi-hats\" title=\"HATs\"\u003eHATs\u003c\/a\u003e while also utilising this expansion board. The X1006 and your SSDs\/HDDs are powered from Raspberry Pi 5 via chunky pogo pins, using your single \u003ca href=\"\/collections\/raspberry-pi-psus\/compatible-with_raspberry-pi-5\" title=\"USB-C power supply\"\u003eUSB-C power supply\u003c\/a\u003e for everything.\u003c\/p\u003e\n\u003cp\u003eThe X1006 serves as the perfect storage solution for establishing a home media centre or constructing a network-attached storage (NAS) system with a Raspberry Pi 5.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSSDs, Raspberry Pi and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eSupports the connection of a 2.5\" SATA SSD\/HDD and an M.2 2280 \u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSATA\u003c\/span\u003e \u003c\/strong\u003eSSD to your Raspberry Pi 5 simultaneously\n\u003cul\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eDoes not support M.2 NVMe SSDs\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports up to 4TB (2.5\" SSD\/HDD) + 2TB (M.2 2280 SSD) \u003cstrong\u003eSATA \u003c\/strong\u003edisk drives\u003c\/li\u003e\n\u003cli\u003eCompliant with the Serial ATA 3.0 specification, with backwards compatibility to SATA 2.0 and SATA 1.0\u003c\/li\u003e\n\u003cli\u003eAdheres to the PCI-Express v2.0 specification and is backwards compatible with PCI-Express v1.0\u003c\/li\u003e\n\u003cli\u003eSupports communication speeds of 5.0 Gbit\/s, 3.0 Gbit\/s, and 1.5 Gbit\/s\u003c\/li\u003e\n\u003cli\u003eCompatible with SATA 6G, 3G, and 1.5G hard drives\u003c\/li\u003e\n\u003cli\u003eLED indicators display power and drive status\u003c\/li\u003e\n\u003cli\u003ePowered from Raspberry Pi 5 via pogo pins\u003c\/li\u003e\n\u003cli\u003eCompatible with the official active cooler\u003c\/li\u003e\n\u003cli\u003eSupports the HAT+ STANDBY power state, automatically turning off SATA devices when the Pi 5 is powered down\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThe X1006 is designed for data storage purposes and does not currently support booting from SSD with the existing firmware.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5VDC ±5% ≥3A via FFC \u0026amp; pogo pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"3\"\u003e\u003cstrong\u003ePorts \u0026amp; connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePCIe connector ×1 – 16-pin pitch 0.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSATA 2.5\" \u003cstrong\u003eSATA \u003c\/strong\u003eSSD\/HDD connector ×1 – 7+15P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSATA M.2 2280 \u003cstrong\u003eSATA \u003c\/strong\u003eSSD connector ×1 – 64P KEY-B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCIe FFC cable length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e37mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCB size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e107.5mm × 87mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"SupTronics X1006 software setup\" href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1006-v1.1_software.html\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" title=\"Suptronics X1006 hardware\" href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1006-v1.1_hardware.html\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x SupTronics X1006 2-port SATA Expansion for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x 37mm PCIe cable\u003c\/li\u003e\n\u003cli\u003e1x Screw pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSSDs, Raspberry Pi and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":54564361634177,"sku":"X1006","price":32.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1006-sata-nvme-expansion-for-raspberry-pi-5-suptronics-x1006-1182622823.jpg?v=1754074995"},{"product_id":"suptronics-x1007-dual-sata-expansion-for-raspberry-pi-5","title":"SupTronics X1007 Dual SATA Expansion for Raspberry Pi 5","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe SupTronics X1007 Dual SATA Expansion for Raspberry Pi 5 adds \u003cspan style=\"text-decoration: underline;\"\u003etwo\u003c\/span\u003e 2.5\" SATA 3.0 ports with up to 5Gbps speeds via PCIe. Mounts under the Pi 5 without blocking GPIO, powers via pogo pins, and supports mass storage setups.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eIntroducing the \u003ca href=\"\/collections\/suptronics\" title=\"SupTronics\"\u003eSupTronics\u003c\/a\u003e \u003cstrong\u003eX1007\u003c\/strong\u003e Dual SATA Expansion, designed to provide a mass-capacity storage and high-speed storage solution via PCIe, for your \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e. This board facilitates the \u003cstrong\u003esimultaneous connection of two\u003c\/strong\u003e \u003ca href=\"\/products\/wd-green-240gb-2-5-ssd\" title='2.5\" HDDs\/SSDs'\u003e2.5\" HDDs\/SSDs\u003c\/a\u003e, with SATA 3.0 interface speeds reaching up to 5Gbps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: does not currently support booting from SSD with the existing firmware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe X1007 connects to the underside of the Raspberry Pi 5, eliminating the need for a passthrough for the GPIO. This means you can use your favourite \u003ca href=\"\/collections\/raspberry-pi-hats\" title=\"HATs\"\u003eHATs\u003c\/a\u003e while also utilising this expansion board. The X1007 and your SSDs\/HDDs can be powered from Raspberry Pi 5 via chunky pogo pins, \u003cspan\u003eusing your single \u003c\/span\u003e\u003ca title=\"USB-C power supply\" href=\"\/collections\/raspberry-pi-psus\/compatible-with_raspberry-pi-5\"\u003eUSB-C power supply\u003c\/a\u003e\u003cspan\u003e for everything.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe X1007 serves as the perfect storage solution for establishing a home media centre or constructing a network-attached storage (NAS) system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSSDs, Raspberry Pi and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eSupports the connection of two 2.5\" HDD\/SSD to your Raspberry Pi 5 simultaneously\u003c\/li\u003e\n\u003cli\u003eSupports up to 4TB + 4TB 2.5\" SATA disk drives (HDDs\/SSDs)\u003c\/li\u003e\n\u003cli\u003eCompliant with the Serial ATA 3.0 specification, with backward compatibility to SATA 2.0 and SATA 1.0\u003c\/li\u003e\n\u003cli\u003eAdheres to the PCI-Express v2.0 specification and is backward compatible with PCI-Express v1.0\u003c\/li\u003e\n\u003cli\u003eSupports communication speeds of 5.0 Gbit\/s, 3.0 Gbit\/s, and 1.5 Gbit\/s\u003c\/li\u003e\n\u003cli\u003eCompatible with SATA 6G, 3G, and 1.5G hard drives\u003c\/li\u003e\n\u003cli\u003eLED indicators display power and drive status\u003c\/li\u003e\n\u003cli\u003ePowered from Raspberry Pi 5 via pogo pins\u003c\/li\u003e\n\u003cli\u003eCompatible with the Raspberry Pi Active Cooler\u003c\/li\u003e\n\u003cli\u003eSupports the HAT+ STANDBY power state, automatically turning off SATA devices when the Pi 5 is powered down\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThe X1007 is designed for data storage purposes and does not currently support booting from HDD\/SSD with the existing firmware.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5Vdc ±5% ≥3A via FFC \u0026amp; pogo pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\"\u003e\u003cstrong\u003ePorts \u0026amp; connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePCIe connector ×1 – 16-pin pitch 0.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSATA connectors ×2 – 7+15P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCIe FFC cable length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e37mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCB size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e164.5mm × 71.85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1007-v1.1_software.html\" rel=\"noopener\" title=\"Software setup\/tutorials\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1007-v1.1_hardware.html\" rel=\"noopener\" title=\"Hardware information and assembly\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x SupTronics X1007 Dual SATA Expansion for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x 37mm PCIe cable\u003c\/li\u003e\n\u003cli\u003e1x Screw pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSSDs, Raspberry Pi and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":54564608016769,"sku":"X1007","price":36.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1007-dual-sata-expansion-for-raspberry-pi-5-suptronics-x1007-1182622815.jpg?v=1754074872"},{"product_id":"suptronics-x1008-3-5-2-5-sata-expansion-for-raspberry-pi-5","title":"SupTronics X1008 3.5\" + 2.5\" SATA Expansion for Raspberry Pi 5","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe SupTronics X1008 3.5\" + 2.5\" SATA HDD Expansion for Raspberry Pi 5 supports one 3.5\" SATA HDD and one 2.5\" SATA HDD\/SSD at up to 5Gbps via PCIe. Powered via 12V DC jack with onboard step-down converters, it simplifies NAS and media storage setups.\u003c\/strong\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eIntroducing the \u003ca title=\"SupTronics\" href=\"\/collections\/suptronics\"\u003eSupTronics\u003c\/a\u003e \u003cstrong\u003eX1008\u003c\/strong\u003e 3.5\" + 2.5\" SATA HDD Expansion, designed to provide a mass-capacity storage and high-speed storage solution via PCIe, for your \u003ca title=\"Raspberry Pi 5\" href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e. This board facilitates the simultaneous connection of a 3.5\" HDD and a \u003ca title='2.5\" HDD\/SSD' href=\"\/products\/wd-green-240gb-2-5-ssd\"\u003e2.5\" HDD\/SSD\u003c\/a\u003e, with SATA 3.0 interface speeds reaching up to 5Gbps.\u003c\/p\u003e\n\u003cp\u003eWith support for \u003cstrong\u003e12V 3A input via a standard DC jack\u003c\/strong\u003e \u003cstrong\u003e(\u003ca title=\"power supply\" href=\"\/products\/meanwell-12v-5a-60w-power-supply-gst60a12-p1j\"\u003epower supply\u003c\/a\u003e not included)\u003c\/strong\u003e and equipped with high-efficiency DC\/DC step-down converters, the X1008 efficiently powers both your Raspberry Pi 5 and HDDs from a single power source, simplifying your setup. \u003cstrong\u003eDo not power your Pi 5 via USB-C at the same time as the barrel jack!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe X1008 serves as the perfect storage solution for establishing a home media centre or constructing a network-attached storage (NAS) system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSSD\/HDD, Raspberry Pi, Active Cooler and power supply not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eSupports the connection of a 3.5\" SATA HDD and a 2.5\" HDD\/SSD to your Pi 5 simultaneously\u003c\/li\u003e\n\u003cli\u003eSupports up to 16TB (3.5\" HDD) + 4TB (2.5\" HDD\/SSD) SATA disk drives\u003c\/li\u003e\n\u003cli\u003eCompliant with the Serial ATA 3.0 specification, with backward compatibility to SATA 2.0 and SATA 1.0\u003c\/li\u003e\n\u003cli\u003eAdheres to the PCI-Express v2.0 specification and is backward compatible with PCI-Express v1.0\u003c\/li\u003e\n\u003cli\u003eSupports communication speeds of 5.0 Gbit\/s, 3.0 Gbit\/s, and 1.5 Gbit\/s\u003c\/li\u003e\n\u003cli\u003eCompatible with SATA 6G, 3G, and 1.5G hard drives\u003c\/li\u003e\n\u003cli\u003eLED indicators display power and drive status\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency DC\/DC step-down converter to power both your Raspberry Pi 5 and SATA devices simultaneously\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e12V Barrel Jack power supply not included\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eEfficient power delivery to the Raspberry Pi 5 via pogo pins\u003c\/li\u003e\n\u003cli\u003eOn-board push button performs the same actions as the Pi's power button\u003c\/li\u003e\n\u003cli\u003eCompatible with the Raspberry Pi Active Cooler without compromising cooling performance\u003c\/li\u003e\n\u003cli\u003eSupports the HAT+ STANDBY power state, automatically turning off SATA devices when the Pi 5 is powered down\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThe X1008 is designed for data storage purposes and does not currently support booting from HDD\/SSD with the existing firmware.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eDo not power the X1008 via the DC power jack and the Raspberry Pi 5 via USB-C at the same time.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12VDC ±5% ≥3A via DC power jack 5.5×2.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\"\u003e\u003cstrong\u003ePorts \u0026amp; connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePCIe connector ×1 – 16-pin pitch 0.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSATA connectors ×2 – 7+15P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCIe FFC cable length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e37mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCB size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e164.5mm × 101.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Software setup\/tutorials\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1008-v1.1_software.html\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Hardware information and assembly\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1008-v1.1_hardware.html\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x SupTronics X1008 3.5\" + 2.5\" SATA HDD Expansion for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x 37mm PCIe cable\u003c\/li\u003e\n\u003cli\u003e1x Screw pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSSD\/HDD, Raspberry Pi, Active Cooler and power supply not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":54564832018817,"sku":"X1008","price":42.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1008-3-5-2-5-sata-expansion-for-raspberry-pi-5-suptronics-x1008-1182622808.jpg?v=1754074634"},{"product_id":"suptronics-x1009-5-port-sata-add-on-for-raspberry-pi-5","title":"SupTronics X1009 5-Port SATA Add-on for Raspberry Pi 5","description":"\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThe SupTronics X1009 5-Port SATA Add-on for Raspberry Pi 5 connects up to five SATA drives via PCIe at 5Gbps. Powered through a 12V DC jack with onboard converters, it powers both the Pi and drives from one source.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe \u003ca title=\"SupTronics\" href=\"\/collections\/suptronics\"\u003eSupTronics\u003c\/a\u003e \u003cstrong\u003eX1009\u003c\/strong\u003e 5-Port SATA Add-on is designed to offer a high-capacity and high-speed storage solution for your \u003ca title=\"Raspberry Pi 5\" href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e. This board supports the \u003cstrong\u003esimultaneous connection of 5 large-capacity SATA storage devices\u003c\/strong\u003e, with the SATA 3.0 interface reaching speeds of up to 5Gbps via PCIe.\u003c\/p\u003e\n\u003cp\u003eThe X1009 features a \u003cstrong\u003e12V input\u003c\/strong\u003e via a standard DC jack \u003cstrong\u003e(power supply not included)\u003c\/strong\u003e and is equipped with high-efficiency DC\/DC step-down converters to power both your Raspberry Pi 5 and PCIe devices concurrently, simplifying the power supply to a single source. \u003cstrong\u003eDo not power your Pi 5 via USB-C at the same time as the barrel jack!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIdeal for creating a home media centre or setting up a network-attached storage (NAS) system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease read the specifications - you're going to need a beefy 12V PSU to power five drives at once (up to 11A!).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHDDs, Raspberry Pi, Active Cooler and power supply not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5B\u003c\/li\u003e\n\u003cli\u003eSupports the connection of five SATA 3.0 devices to your Raspberry Pi 5 simultaneously\u003c\/li\u003e\n\u003cli\u003eCompliant with the Serial ATA 3.0 specification, with backward compatibility to SATA 2.0 and SATA 1.0\u003c\/li\u003e\n\u003cli\u003eAdheres to the PCI-Express v2.0 specification and is backward compatible with PCI-Express v1.0\u003c\/li\u003e\n\u003cli\u003eSupports communication speeds of 5.0 Gbit\/s, 3.0 Gbit\/s, and 1.5 Gbit\/s\u003c\/li\u003e\n\u003cli\u003eCompatible with SATA 6G, 3G, and 1.5G hard drives\u003c\/li\u003e\n\u003cli\u003eBlue LED indicators display power and drive status\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency DC\/DC step-down converter to power both your Raspberry Pi 5 and SATA devices simultaneously\u003c\/li\u003e\n\u003cli\u003eEfficient power delivery to the Raspberry Pi 5 via a pin header, consolidating power sources\u003c\/li\u003e\n\u003cli\u003eCompatible with the \u003ca title=\"Raspberry Pi Active Cooler\" href=\"\/products\/active-cooler-for-raspberry-pi-5\"\u003eRaspberry Pi Active Cooler\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports the HAT+ STANDBY power state, automatically turning off SATA devices when the Pi 5 is powered down\u003c\/li\u003e\n\u003cli\u003eIncludes a power SATA splitter cable for connecting up to 5 Serial ATA devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThe X1009 is designed for data storage purposes and does not currently support booting from HDD\/SSD with the existing firmware.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eDo not power the X1009 via the DC power jack and the Raspberry Pi 5 via USB-C at the same time.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"4\"\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12Vdc ±5% ≥3A for one 3.5\" HDD or one 2.5\" HDD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e≥5A for two 3.5\" HDDs, ≥7A for three, ≥9A for four, ≥11A for five 3.5\" HDDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e≥4A for two 2.5\" HDDs, ≥5A for three, ≥6A for four, ≥7A for five 2.5\" HDDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYour SATA drives can also be powered from a separate PSU.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"3\"\u003e\u003cstrong\u003ePorts \u0026amp; connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC power jack ×1 – 5.5×2.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCIe connector ×1 – 16-pin pitch 0.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSATA connectors ×5 – 7P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCIe cable length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e37mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCB size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e85mm × 57.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1009-v1.1_software.html\" rel=\"noopener\" title=\"Software setup\/tutorials\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1009-v1.1_hardware.html\" rel=\"noopener\" title=\"Hardware information and assembly\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x SupTronics X1009 5-Port SATA Add-on for Raspberry Pi 5\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x SATA power splitter cable\u003c\/li\u003e\n\u003cli\u003e1x 30mm PCIe cable\u003c\/li\u003e\n\u003cli\u003e1x Screw pack\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":54565885739393,"sku":"X1009","price":49.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1009-5-port-sata-add-on-for-raspberry-pi-5-suptronics-x1009-1182628362.jpg?v=1754081952"},{"product_id":"suptronics-x1012-nvme-poe-add-on-for-raspberry-pi-5","title":"SupTronics X1012 NVMe + PoE Add-on for Raspberry Pi 5","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe SupTronics X1012 NVMe + PoE Add-on for Raspberry Pi 5 combines 802.3af\/at PoE (5V 5A output) with support for M.2 NVMe SSDs. Combine PoE and NVMe storage in a single, compact board.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/suptronics\" title=\"SupTronics\"\u003eSupTronics\u003c\/a\u003e \u003cstrong\u003eX1012\u003c\/strong\u003e NVMe + PoE Add-on is specifically designed to offer a reliable power source and enhance storage capabilities for \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThis add-on provides your Raspberry Pi 5 with \u003cstrong\u003e802.3af\/at PoE compatibility\u003c\/strong\u003e, with an \u003cstrong\u003eoutput of 5V 5A\u003c\/strong\u003e. You will need a power-injected Ethernet line, from a PoE router, switch or separate \u003ca href=\"\/products\/raspberry-pi-poe-injector\" title=\"PoE injector\"\u003ePoE injector\u003c\/a\u003e. There is also an aux power jack for 35V-57VDC input.\u003c\/p\u003e\n\u003cp\u003eAt the same time, it also provides the ability to mount an M.2 NVMe SSD for booting or storage. Despite the compact design, this add-on can accommodate various \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"Raspberry Pi SSD\"\u003eM.2 SSD\u003c\/a\u003e lengths, including \u003cstrong\u003e2280\u003c\/strong\u003e, \u003cstrong\u003e2260\u003c\/strong\u003e, \u003cstrong\u003e2242\u003c\/strong\u003e, and \u003cstrong\u003e2230\u003c\/strong\u003e. It supports booting the operating system from your SSD, and the design is compatible with the \u003ca href=\"\/products\/active-cooler-for-raspberry-pi-5\" title=\"Raspberry Pi Active Cooler\"\u003eRaspberry Pi Active Cooler\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSSD, Raspberry Pi and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eOptimal data storage + PoE solution for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eFully isolated switched-mode power supply\u003c\/li\u003e\n\u003cli\u003eCompatible with 802.3af\/at Specifications\u003c\/li\u003e\n\u003cli\u003eSupports 48V Auxiliary Adapter Supply\u003c\/li\u003e\n\u003cli\u003eInput voltage: 37–57V DC, Class 4 device\u003c\/li\u003e\n\u003cli\u003eOutput power: 5VDC \/ 5A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNVMe\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSupports high-capacity M.2 NVMe solid-state drives up to 4TB\u003c\/li\u003e\n\u003cli\u003eAccommodates various M.2 NVMe SSD form factors, including 2280, 2260, 2242, and 2230\u003c\/li\u003e\n\u003cli\u003eSupports operating system booting from your SSD\u003c\/li\u003e\n\u003cli\u003eOffers fast data transfer speeds with PCIe 2.0 5Gbps \/ PCIe 3.0 8Gbps\u003c\/li\u003e\n\u003cli\u003eCompatible with the Raspberry Pi Active Cooler\u003c\/li\u003e\n\u003cli\u003eBlue LED indicator displays power and drive status\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency DC\/DC step-down converter, providing up to 6A of power for your SSD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e35–57VDC powering over Ethernet or 40–57VDC via auxiliary power jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"3\"\u003e\u003cstrong\u003ePorts \u0026amp; connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePCIe connector – 16-pin pitch 0.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSSD connector – M.2 M-Key\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAUX power jack – 5.5×2.1mm, centre positive (+)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCIe cable length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCB size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e87mm × 56mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1012-v1.2_software.html\" rel=\"noopener\" title=\"Software setup\/tutorials\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1012-v1.2_hardware.html\" rel=\"noopener\" title=\"Hardware information and assembly\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNVMe SSD Incompatibility List\u003c\/h3\u003e\n\u003cp\u003eWe recommend refraining from using the following NVMe SSD drives, which are equipped with a Phison controller due to their proven incompatibility:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWD Blue SN550\/SN580 series\u003c\/li\u003e\n\u003cli\u003eWD Green SN350 series\u003c\/li\u003e\n\u003cli\u003eWD Black SN850 series\u003c\/li\u003e\n\u003cli\u003eOther NVMe SSD drivers equipped with the same Phison controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese specific models have demonstrated compatibility issues, and it is advisable to avoid them when considering NVMe SSD options for X10xx series NVMe add-ons. By steering clear of these drives, users can ensure a smoother and more reliable experience with their storage solutions.\u003c\/p\u003e\n\u003cp\u003eA few other notes re SSD compatibility:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with M.2 NVMe SSDs\u003c\/li\u003e\n\u003cli\u003eNot compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices\u003c\/li\u003e\n\u003cli\u003eOlder NVMe drives with less efficient flash media may not perform as well as newer drives\u003c\/li\u003e\n\u003cli\u003eNew NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they can be accessed in the Explorer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x SupTronics X1012 NVMe + PoE Add-on for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x 30mm PCIe cable\u003c\/li\u003e\n\u003cli\u003e1x Screw pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSSD, Raspberry Pi and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":54566312608129,"sku":"X1012","price":29.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1012-nvme-poe-add-on-for-raspberry-pi-5-suptronics-x1012-1182638599.jpg?v=1754089286"},{"product_id":"suptronics-x1016-four-slot-nvme-add-on-for-raspberry-pi-5","title":"SupTronics X1016 Four-Slot NVMe Add-on for Raspberry Pi 5","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThe SupTronics X1016 Four-Slot NVMe Add-on for Raspberry Pi 5 connects up to four M.2 SSDs (2280\/2242\/2230) via PCIe 3.0, delivering speeds up to 8Gbps. Fits under the Pi 5, supports SSD booting, and powers Pi and SSDs from a single 9–17V input.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe \u003ca href=\"\/collections\/suptronics\" title=\"SupTronics\"\u003eSupTronics\u003c\/a\u003e \u003cstrong\u003eX1016\u003c\/strong\u003e Four-Slot NVMe Add-on is a PCIe 3.0 to \u003cstrong\u003efour-slot M.2 NVMe add-on,\u003c\/strong\u003e offering a high-capacity, high-speed storage solution for your \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e. \u003cem\u003eYes - run four NVMe SSDs on your Pi 5 with this add-on!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eIts compact design allows for the easy attachment of four \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"M.2 SSDs\"\u003eM.2 SSDs\u003c\/a\u003e in either\u003cstrong\u003e 2280, 2242 or 2230 formats\u003c\/strong\u003e. With the \u003cstrong\u003eASM2806 PCIe 3.1 Packet Switch\u003c\/strong\u003e, you can achieve data transfer rates of up to 8Gbps, enabling the rapid transfer of large amounts of data.\u003c\/p\u003e\n\u003cp\u003eThe X1016 attaches to the underside of the Raspberry Pi 5, eliminating the need for a GPIO passthrough and ensuring compatibility with your favourite \u003ca href=\"\/collections\/raspberry-pi-hats\" title=\"HATs\"\u003eHATs\u003c\/a\u003e or an \u003ca href=\"\/products\/active-cooler-for-raspberry-pi-5\" title=\"Active Cooler\"\u003eActive Cooler\u003c\/a\u003e. It features a \u003cstrong\u003ewide-input power supply (9-17V)\u003c\/strong\u003e via a standard DC jack \u003cstrong\u003e(\u003ca href=\"\/products\/meanwell-12v-5a-60w-power-supply-gst60a12-p1j\" title=\"power supply\"\u003epower supply\u003c\/a\u003e not included)\u003c\/strong\u003e and incorporates high-efficiency DC\/DC step-down converters. This design allows you to power both your Raspberry Pi 5 and PCIe devices simultaneously with a single power source.\u003c\/p\u003e\n\u003cp\u003eThe X1016 is an ideal storage solution for creating a home media center or building a network-attached storage (NAS) system. It supports operating system booting from your SSD, resulting in faster application launches, web serving, and file copying.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSSDs, Raspberry Pi and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eSupports a total of 16TB storage capacity (4TB x4) with M.2 NVMe SSDs\u003c\/li\u003e\n\u003cli\u003eAccommodates 2280, 2242 and 2230 M.2 NVMe SSD form factors\u003c\/li\u003e\n\u003cli\u003eHigh-performance PCIe 3.0 packet switch\u003c\/li\u003e\n\u003cli\u003ePCIe 3.0 8Gbps and super-fast boot\u003c\/li\u003e\n\u003cli\u003eLED indicators for power and drive status\u003c\/li\u003e\n\u003cli\u003ePower input range of 9V to 17V\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency DC\/DC step-down converter, delivering a maximum of 12A to power your SSDs\u003c\/li\u003e\n\u003cli\u003eSupports powering via DC power jack\u003c\/li\u003e\n\u003cli\u003eCompatible with the HAT+ STANDBY power state, automatically turning off when the Pi 5 shuts down\u003c\/li\u003e\n\u003cli\u003eCompatible with the Raspberry Pi Active Cooler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9–17VDC ±5% ≥3A via DC power jack, \u003cstrong\u003e12V 5A recommended\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"3\"\u003e\u003cstrong\u003ePorts \u0026amp; connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC power jack: 5.5×2.1mm, polarity: centre positive (+)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCIe connector ×1 – 16-pin pitch 0.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSSD connectors ×4 – M.2 M-Key\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCIe FFC cable length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e37mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCB size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e109mm × 87.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1016-v1.0_software.html\" rel=\"noopener\" title=\"Software setup\/tutorials\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1016-v1.0_hardware.html\" rel=\"noopener\" title=\"Hardware information and assembly\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNVMe SSD Incompatibility List\u003c\/h3\u003e\n\u003cp\u003eWe recommend refraining from using the following NVMe SSD drives, which are equipped with a Phison controller due to their proven incompatibility:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWD Blue SN550\/SN580 series\u003c\/li\u003e\n\u003cli\u003eWD Green SN350 series\u003c\/li\u003e\n\u003cli\u003eWD Black SN850 series\u003c\/li\u003e\n\u003cli\u003eOther NVMe SSD drivers equipped with the same Phison controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese specific models have demonstrated compatibility issues, and it is advisable to avoid them when considering NVMe SSD options for X10xx series NVMe add-ons. By steering clear of these drives, users can ensure a smoother and more reliable experience with their storage solutions.\u003c\/p\u003e\n\u003cp\u003eA few other notes re SSD compatibility:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with M.2 NVMe SSDs\u003c\/li\u003e\n\u003cli\u003eNot compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices\u003c\/li\u003e\n\u003cli\u003eOlder NVMe drives with less efficient flash media may not perform as well as newer drives\u003c\/li\u003e\n\u003cli\u003eNew NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they can be accessed in the Explorer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x SupTronics X1016 Four-Slot NVMe Add-on for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x 37mm PCIe cable\u003c\/li\u003e\n\u003cli\u003e1x Screw pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSSDs, Raspberry Pi and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":54566568362369,"sku":"X1016","price":73.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1016-four-slot-nvme-add-on-for-raspberry-pi-5-suptronics-x1016-1182638592.jpg?v=1754089165"},{"product_id":"raspberry-pi-m-2-hat-compact","title":"Raspberry Pi M.2 HAT+ Compact","description":"\u003cp\u003eThe \u003ca href=\"\/collections\/raspberry-pi\" title=\"Raspberry Pi\"\u003eRaspberry Pi\u003c\/a\u003e M.2 HAT+ \u003cstrong\u003eCompact \u003c\/strong\u003eis a new version of the original \u003ca href=\"\/products\/raspberry-pi-m2-hat-plus\" title=\"Raspberry Pi M.2 HAT+\"\u003eRaspberry Pi M.2 HAT+\u003c\/a\u003e designed to fit inside the \u003ca title=\"Raspberry Pi 5 Case\" href=\"\/products\/raspberry-pi-5-case\"\u003eRaspberry Pi 5 Case\u003c\/a\u003e, enabling you to connect M.2 peripherals such as NVMe drives and AI accelerators to Raspberry Pi 5’s PCIe 2.0 interface, supporting fast (up to 500 MB\/s) data transfer.\u003c\/p\u003e\n\u003cp\u003eThanks to the L-shaped design and low-profile header fitting, the Raspberry Pi M.2 HAT+ Compact can be used with Raspberry Pi's official Pi 5 case, without getting in the way of the integrated cooling fan and heatsinks (with the lid on too!). \u003cstrong\u003eNot compatible with the Active cooler.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe HAT connects to your \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e using the built-in (non-replaceable) PCIe ribbon cable and GPIO pins. No additional cable is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis compact form-factor can only support \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"Raspberry Pi SSD\"\u003e2230-size NVMe SSDs\u003c\/a\u003e. \u003c\/strong\u003eIf you need something to support 2242, 2260 or even 2280 SSDs, \u003ca href=\"\/collections\/raspberry-pi-ssd-hats\/compatible-with_raspberry-pi-5\" title=\"Raspberry Pi SSD HATs\"\u003echeck out our SSD HAT section for a great range of options\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, SSD, and case not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with Raspberry Pi 5 and official Raspberry Pi 5 Case\u003c\/li\u003e\n\u003cli\u003eCompact design avoids interference with the official case fan and heatsink\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eNot compatible with the Active cooler\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports 2230-size NVMe SSDs\u003c\/li\u003e\n\u003cli\u003eConnects via fixed PCIe ribbon cable and GPIO header (no extra cables required)\u003c\/li\u003e\n\u003cli\u003eSupports M.2 M key edge connector devices\u003c\/li\u003e\n\u003cli\u003eSingle-lane PCIe 2.0 interface (up to 500 MB\/s transfer rate)\u003c\/li\u003e\n\u003cli\u003eSupplies up to 3A to a connected M.2 device\u003c\/li\u003e\n\u003cli\u003eIncludes power and activity LEDs\u003c\/li\u003e\n\u003cli\u003eConforms to the Raspberry Pi HAT+ specification\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0° to 50° (ambient)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.raspberrypi.com\/documentation\/accessories\/m2-hat-plus.html#compact-installation\" title=\"Raspberry Pi M.2 HAT+ Compact assembly instructions\" rel=\"noopener\" target=\"_blank\"\u003eRaspberry Pi M.2 HAT+ Compact assembly instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.raspberrypi.com\/news\/m-2-hat-compact-on-sale-now-at-15\/\" title=\"M.2 HAT+ Compact on sale now\" rel=\"noopener\" target=\"_blank\"\u003eRaspberry Pi M.2 HAT+ Compact product announcement blog post\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pip.raspberrypi.com\/documents\/RP-009234-MM-Raspberry-Pi-M-2-HAT-product-brief.pdf\" title=\"M.2 HAT+ Compact Product Brief\"\u003eRaspberry Pi M.2 HAT+ Compact Product Brief\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/datasheets.raspberrypi.com\/m2-hat-plus\/raspberry-pi-m2-hat-plus-schematics.pdf\" title=\"Raspberry Pi M.2 HAT+ Compact schematics\" rel=\"noopener\" target=\"_blank\"\u003eRaspberry Pi M.2 HAT+ Compact schematics\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eProduction lifetime: The Raspberry Pi M.2 HAT+ Compact will remain in production until at least January 2032\u003c\/li\u003e\n\u003cli\u003eCompliance: For a full list of local and regional product approvals, please visit \u003ca rel=\"noopener\" title=\"Raspberry Pi PIP\" href=\"https:\/\/pip.raspberrypi.com\" target=\"_blank\"\u003epip.raspberrypi.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eProduct number: Raspberry Pi SC1771\u003c\/li\u003e\n\u003cli\u003eEAN: 5056561805863\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Raspberry Pi M.2 HAT+ Compact\n\u003cul\u003e\n\u003cli style=\"font-style: italic;\"\u003e\u003cem\u003eNon-replaceable PCIe cable built into the PCB\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x Pack of threaded spacers and screws\u003c\/li\u003e\n\u003cli\u003e1x Knurled double-flanged screw to secure and support the M.2 peripheral\n\u003cul\u003e\n\u003cli style=\"font-style: italic;\"\u003e\u003cem\u003eMay be pre-fitted to the board\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, SSD, and case not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":54773214577025,"sku":"SC1771","price":14.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/raspberry-pi-m-2-hat-compact-raspberry-pi-sc1771-1193903128.jpg?v=1758452236"},{"product_id":"suptronics-x1000-nvme-add-on-for-raspberry-pi-5","title":"SupTronics X1000 NVMe Add-on for Raspberry Pi 5","description":"\u003cp\u003eThe \u003ca title=\"Suptronics\" href=\"\/collections\/suptronics\"\u003eSuptronics\u003c\/a\u003e \u003cstrong\u003eX1000\u003c\/strong\u003e is a compact SSD expansion board for \u003ca title=\"Raspberry Pi 5\" href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e, allowing you to attach\u003cstrong\u003e 2230 or 2242-format \u003c\/strong\u003e\u003ca title=\"M.2 NVMe drives\" href=\"\/products\/raspberry-pi-ssd\"\u003eM.2 NVMe drives\u003c\/a\u003e via the PCIe 2.0\/3.0 interface. It supports data transfer rates of up to 8Gbps.\u003c\/p\u003e\n\u003cp\u003eDesigned to mount on top of the Raspberry Pi 5, it features a \u003cstrong\u003epass-through 40-pin header for continued GPIO access\u003c\/strong\u003e and supports use with other HATs. The low-profile form factor is compatible with the \u003ca title=\"Raspberry Pi Active Cooler\" href=\"\/products\/active-cooler-for-raspberry-pi-5\"\u003eRaspberry Pi Active Cooler\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eMounting holes and the \u003cstrong\u003eincluded standoffs\u003c\/strong\u003e help secure the board to your Raspberry Pi 5. A \u003cstrong\u003ebuilt-in LED\u003c\/strong\u003e indicates read\/write drive activity.\u003c\/p\u003e\n\u003cp\u003eYou can boot directly from an SSD, improving application load times, file transfer speeds, and performance in tasks like web serving or building a local media server or NAS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, SSD and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eSupports up to 4TB M.2 NVMe solid-state drives\u003c\/li\u003e\n\u003cli\u003eSupports two M.2 NVMe SSD form factors: 2242 or 2230\u003c\/li\u003e\n\u003cli\u003eSupports PCIe 2.0 5Gbps \/ PCIe 3.0 8Gbps\u003c\/li\u003e\n\u003cli\u003eCompatible with the Raspberry Pi Active Cooler without affecting cooling performance\u003c\/li\u003e\n\u003cli\u003eLED indicator (blue) displays power and drive status\u003c\/li\u003e\n\u003cli\u003eIntegrated high-efficiency DC\/DC step-down converter, providing a maximum of 3.5A to power your SSD\u003c\/li\u003e\n\u003cli\u003eStackable design allows for attachment on bottom of other HATs\u003c\/li\u003e\n\u003cli\u003ePowered through the 40-pin GPIO header and PCIe FFC\u003c\/li\u003e\n\u003cli\u003eCompatible with the HAT+ STANDBY power state (automatically turns off after the Pi 5 shuts down)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot compatible with M.2 \u003cspan style=\"text-decoration: underline;\"\u003eSATA\u003c\/span\u003e SSDs, M.2 PCIe \u003cspan style=\"text-decoration: underline;\"\u003eAHCI\u003c\/span\u003e SSDs, or other M.2 non-NVMe devices\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply: 5Vdc +\/-5% power via FFC \u0026amp; GPIO pin header, converted to 3.3V max 3.5A to power the SSD\u003c\/li\u003e\n\u003cli\u003ePorts \u0026amp; Connectors: PCIe connector - 16-pin pitch0.5mm\u003c\/li\u003e\n\u003cli\u003eSSD connector: M.2 M-Key\u003c\/li\u003e\n\u003cli\u003ePCIe cable length: 30mm\u003c\/li\u003e\n\u003cli\u003ePCB Size: 65mm x 56mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAs with all M.2 NVMe adapters for Raspberry Pi 5, certain models of M.2 NVMe SSD (usually with a Phison controller) are best avoided due to compatibility issues.\u003c\/p\u003e\n\u003cp\u003eThe following models have been highlighted by SupTronics as having poor compatibility, however other online resources will highlight further models\/brands to avoid:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWD Blue SN550\/SN580 series\u003c\/li\u003e\n\u003cli\u003eWD Green SN350 series\u003c\/li\u003e\n\u003cli\u003eWD Black SN850 series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Software setup\/tutorials\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x100x-v1.0_software.html\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Hardware information and assembly\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1000-v1.5_hardware.html\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x SupTronics V1.5 X1000 NVMe Add-on for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x Screw and stand-off pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, SSD and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":55090640257409,"sku":"X1000","price":8.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1000-nvme-add-on-for-raspberry-pi-5-suptronics-x1000-1211287637.jpg?v=1765823354"},{"product_id":"suptronics-x1002-bottom-mount-nvme-add-on-for-raspberry-pi-5","title":"SupTronics X1002 Bottom-Mount NVMe Add-on for Raspberry Pi 5","description":"\u003cp\u003eThe \u003ca href=\"\/collections\/suptronics\" title=\"SupTronics\"\u003eSupTronics\u003c\/a\u003e \u003cstrong\u003eX1002\u003c\/strong\u003e is a compact, \u003cstrong\u003ebottom-mounted\u003c\/strong\u003e NVMe expansion board for \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e, allowing you to attach a range of \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"M.2 NVMe SSD\"\u003eM.2 NVMe SSD\u003c\/a\u003e sizes (\u003cstrong\u003e2230, 2242, 2260, and 2280\u003c\/strong\u003e) via the PCIe 2.0\/3.0 interface. It supports data transfer speeds of up to 8Gbps.\u003c\/p\u003e\n\u003cp\u003eIt connects to the underside of the Raspberry Pi 5, keeping the \u003cstrong\u003eGPIO header clear for other add-ons\u003c\/strong\u003e. With nothing on top of your Raspberry Pi, the design also compliments the use of a \u003ca href=\"\/products\/active-cooler-for-raspberry-pi-5\" title=\"Raspberry Pi Active Cooler\"\u003eRaspberry Pi Active Cooler\u003c\/a\u003e. or other top-mounted coolers and hardware.\u003c\/p\u003e\n\u003cp\u003eMounting holes and standoffs are included to secure the board to your Raspberry Pi. An onboard LED shows drive write\/read activity status.\u003c\/p\u003e\n\u003cp\u003eThe board supports booting from NVMe, allowing faster performance for tasks like app launching, web serving, and media streaming. It’s a solid option for projects like home media centres or NAS setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, SSD and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eSupports high-capacity M.2 NVMe solid-state drives up to 4TB\u003c\/li\u003e\n\u003cli\u003eAccommodates various M.2 NVMe SSD form factors, including 2280, 2260, 2242, and 2230\u003c\/li\u003e\n\u003cli\u003eSupports PCIe 2.0 5Gbps \/ PCIe 3.0 8Gbps for speedy data transfer and superfast boot\u003c\/li\u003e\n\u003cli\u003eFeatures a blue LED indicator that displays power and drive status\u003c\/li\u003e\n\u003cli\u003eEquipped with an integrated high-efficiency DC\/DC step-down converter, providing up to 3.5A of power for your SSD\u003c\/li\u003e\n\u003cli\u003ePowering via both pogo pins and FFC, ensuring sufficient power supply without any worries\u003c\/li\u003e\n\u003cli\u003eDesigned to be attached on bottom\u003c\/li\u003e\n\u003cli\u003eCompatible with the Raspberry Pi Active Cooler without affecting cooling performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply: 5Vdc +\/-5% power via pogo pins \u0026amp; FFC, converted to 3.3V max 3.5A to power the SSD\u003c\/li\u003e\n\u003cli\u003ePorts \u0026amp; Connectors: PCIe connector - 16-pin pitch 0.5mm\u003c\/li\u003e\n\u003cli\u003eSSD connector: M.2 M-Key\u003c\/li\u003e\n\u003cli\u003ePCIe cable length: 37mm\u003c\/li\u003e\n\u003cli\u003ePCB Size: 87mm x 56mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAs with all M.2 NVMe adapters for Raspberry Pi 5, certain models of M.2 NVMe SSD (usually with a Phison controller) are best avoided due to compatibility issues.\u003c\/p\u003e\n\u003cp\u003eThe following models have been highlighted by SupTronics as having poor compatibility, however other online resources will highlight further models\/brands to avoid:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWD Blue SN550\/SN580 series\u003c\/li\u003e\n\u003cli\u003eWD Green SN350 series\u003c\/li\u003e\n\u003cli\u003eWD Black SN850 series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x100x-v1.0_software.html\" rel=\"noopener\" title=\"Software setup\/tutorials\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1002-v1.1_hardware.html\" rel=\"noopener\" title=\"Hardware information and assembly\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x SupTronics X1002 NVMe Add-on for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x Screw and stand-off pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, SSD and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":55090686689665,"sku":"X1002","price":8.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1002-bottom-mount-nvme-add-on-for-raspberry-pi-5-suptronics-x1002-1211287635.jpg?v=1765823246"},{"product_id":"suptronics-x1005-bottom-mount-dual-nvme-add-on-for-raspberry-pi-5","title":"SupTronics X1005 Bottom-Mount Dual-NVMe Add-on for Raspberry Pi 5","description":"\u003cp\u003eThe \u003ca title=\"SupTronics\" href=\"\/collections\/suptronics\"\u003eSupTronics\u003c\/a\u003e \u003cstrong\u003eX1005\u003c\/strong\u003e is a compact \u003cstrong\u003edual-NVMe\u003c\/strong\u003e expansion board for \u003ca title=\"Raspberry Pi 5\" href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e, allowing you to attach two \u003ca title=\"M.2 SSDs\" href=\"\/products\/raspberry-pi-ssd\"\u003eM.2 SSDs\u003c\/a\u003e in 2280, 2260, 2242 or 2230 formats. It uses a PCIe 2.0 interface with support for transfer speeds up to 5Gbps.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe board connects to your Raspberry Pi 5's PCIe interface and uses an \u003c\/span\u003e\u003cstrong\u003eASmedia ASM1182e PCIe switch\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003echip\u003c\/strong\u003e\u003cspan\u003e to facilitate data transfer between the \u003c\/span\u003e\u003cstrong\u003etwo PCIe interfaces\u003c\/strong\u003e\u003cspan\u003e it provides, with \u003c\/span\u003e\u003cstrong\u003ePCIe Gen2 support\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIt mounts underneath the Raspberry Pi 5, \u003cspan\u003ekeeping the \u003c\/span\u003e\u003cstrong\u003eGPIO header clear for other add-ons\u003c\/strong\u003e\u003cspan\u003e. With nothing on top of your Raspberry Pi, the design also compliments the use of a \u003c\/span\u003e\u003ca title=\"Raspberry Pi Active Cooler\" href=\"\/products\/active-cooler-for-raspberry-pi-5\"\u003eRaspberry Pi Active Cooler\u003c\/a\u003e\u003cspan\u003e or other top-mounted coolers and hardware.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe board includes mounting holes and standoffs to secure both SSDs while helping with heat dissipation. Onboard LEDs show drive read\/write activity at a glance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, SSDs and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eSupports a total of 8TB storage capacity (4TB+4TB) with M.2 NVMe solid-state drives\u003c\/li\u003e\n\u003cli\u003eAccommodates two various M.2 NVMe SSD form factors, including 2280, 2260, 2242, and 2230\u003c\/li\u003e\n\u003cli\u003eSupports PCIe 2.0 5Gbps for speedy data transfer and superfast boot\u003c\/li\u003e\n\u003cli\u003eFully compatible with the Raspberry Pi Active Cooler\u003c\/li\u003e\n\u003cli\u003eLED indicators (blue) display power and drive status\u003c\/li\u003e\n\u003cli\u003eFeatures an integrated high-performance PCIe packet switch\u003c\/li\u003e\n\u003cli\u003eEquipped with two high-efficiency DC\/DC step-down converters, delivering a maximum of 6A to power your SSDs\u003c\/li\u003e\n\u003cli\u003eDesigned to be attached on bottom, allows using your favourite HATs alongside it\u003c\/li\u003e\n\u003cli\u003ePowering via both pogo pins and FFC, ensuring sufficient power supply without any worries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply: 5Vdc +\/-5% power via pogo pins \u0026amp; FFC, converted to 3.3V max 6A to power the SSDs\u003c\/li\u003e\n\u003cli\u003ePorts \u0026amp; Connectors: PCIe connector - 16-pin pitch 0.5mm\u003c\/li\u003e\n\u003cli\u003eSSD connector: M.2 M-Key\u003c\/li\u003e\n\u003cli\u003ePCIe cable length: 37mm x2\u003c\/li\u003e\n\u003cli\u003ePCB Size: 86.5mm x 60mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAs with all M.2 NVMe adapters for Raspberry Pi 5, certain models of M.2 NVMe SSD (usually with a Phison controller) are best avoided due to compatibility issues.\u003c\/p\u003e\n\u003cp\u003eThe following models have been highlighted by SupTronics as having poor compatibility, however other online resources will highlight further models\/brands to avoid:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWD Blue SN550\/SN580 series\u003c\/li\u003e\n\u003cli\u003eWD Green SN350 series\u003c\/li\u003e\n\u003cli\u003eWD Black SN850 series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1004-v1.1_software.html\" rel=\"noopener\" title=\"Software setup\/tutorials\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1005-v1.0_hardware.html\" rel=\"noopener\" title=\"Hardware information and assembly\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x SupTronics X1005 Bottom-Mount Dual-NVMe Add-on for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x PCIe FFC cable (37mm)\u003c\/li\u003e\n\u003cli\u003e1x Screw\/standoff pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, SSDs and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":55090706121089,"sku":"X1005","price":26.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1005-bottom-mount-dual-nvme-add-on-for-raspberry-pi-5-suptronics-x1005-1211287625.jpg?v=1765823111"},{"product_id":"suptronics-x1011-bottom-mount-quad-nvme-add-on-for-raspberry-pi-5","title":"SupTronics X1011 Quad-NVMe Add-on for Raspberry Pi 5","description":"\u003cp\u003eThe \u003ca href=\"\/collections\/suptronics\" title=\"SupTronics\"\u003eSupTronics\u003c\/a\u003e \u003cstrong\u003eX1011\u003c\/strong\u003e is a high-capacity storage expansion board for the \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e, offering \u003cstrong\u003esupport for up to four\u003c\/strong\u003e \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"M.2 2280 NVMe SSDs\"\u003eM.2 2280 NVMe SSDs\u003c\/a\u003e in either \u003cstrong\u003e2280, 2260, 2242, or 2230-format\u003c\/strong\u003e. It connects via PCIe 2.0, supporting transfer speeds up to 5Gbps—ideal for applications like NAS builds or large local media libraries.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe board connects to your Raspberry Pi 5's PCIe interface and uses an \u003c\/span\u003e\u003cstrong\u003eASmedia ASM1184e PCIe switch\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003echip\u003c\/strong\u003e\u003cspan\u003e to facilitate data transfer between the \u003c\/span\u003e\u003cstrong\u003efour PCIe interfaces\u003c\/strong\u003e\u003cspan\u003e it provides, with \u003c\/span\u003e\u003cstrong\u003ePCIe Gen2 support\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe board \u003cstrong\u003econnects to the underside of the Raspberry Pi 5\u003c\/strong\u003e, keeping the GPIO header free for \u003ca href=\"\/collections\/raspberry-pi-hats\" title=\"HATs\"\u003eHATs\u003c\/a\u003e, \u003ca href=\"\/collections\/raspberry-pi-cooling-heatsinks-fans\/compatible-with_raspberry-pi-5\" title=\"coolers\"\u003ecoolers\u003c\/a\u003e and other hardware. It also offers \u003cstrong\u003etwo power options\u003c\/strong\u003e: either draw power from the Pi via pogo pins and USB-C, or power the Pi through the X1011 using a standard DC barrel jack (5V 5A).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandoffs are included\u003c\/strong\u003e to secure the board to your Raspberry Pi 5. A \u003cstrong\u003ebuilt-in status LED\u003c\/strong\u003e shows read\/write activity at a glance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning: Don't power the X1011 via DC power jack and the Raspberry Pi via USB-C at the same time. \u003c\/strong\u003e\u003cem\u003eBad stuff will happen!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, power supply, SSDs and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eSupports a total of 16TB storage capacity (4TB x4) with M.2 NVMe solid-state drives\u003c\/li\u003e\n\u003cli\u003eAccommodates various M.2 NVMe SSD form factors, including 2280, 2260, 2242, and 2230\u003c\/li\u003e\n\u003cli\u003eProvides speedy data transfer with PCIe 2.0 5Gbps\u003c\/li\u003e\n\u003cli\u003eLED indicators in blue display power and drive status\u003c\/li\u003e\n\u003cli\u003eFeatures an integrated high-performance PCIe packet switch\u003c\/li\u003e\n\u003cli\u003eEquipped with high-efficiency DC\/DC step-down converter, delivering a maximum of 10A to power your SSDs\u003c\/li\u003e\n\u003cli\u003ePowering via both pogo pins \u0026amp; FFC or DC power jack\u003c\/li\u003e\n\u003cli\u003eDesigned to be attached on bottom\u003c\/li\u003e\n\u003cli\u003eCompatible with the HAT+ STANDBY power state, automatically turning off when the Pi 5 shuts down\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot compatible with M.2 \u003cspan style=\"text-decoration: underline;\"\u003eSATA\u003c\/span\u003e SSDs, M.2 PCIe \u003cspan style=\"text-decoration: underline;\"\u003eAHCI\u003c\/span\u003e SSDs, or other M.2 non-NVMe devices\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5Vdc ±5% ≥5A power via FFC \u0026amp; pogo pins\u003cbr\u003e5Vdc ±5% ≥5A power via DC power jack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePorts \u0026amp; connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC power jack: 5.5 × 2.1mm, polarity: centre positive (+)\u003cbr\u003ePCIe connector x1: 16-pin, 0.5mm pitch\u003cbr\u003eSSD connectors x4: M.2 M-Key\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCIe FFC cable length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e37mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCB size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e109mm × 87.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAs with all M.2 NVMe adapters for Raspberry Pi 5, certain models of M.2 NVMe SSD (usually with a Phison controller) are best avoided due to compatibility issues.\u003c\/p\u003e\n\u003cp\u003eThe following models have been highlighted by SupTronics as having poor compatibility, however other online resources will highlight further models\/brands to avoid:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWD Blue SN550\/SN580 series\u003c\/li\u003e\n\u003cli\u003eWD Green SN350 series\u003c\/li\u003e\n\u003cli\u003eWD Black SN850 series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1011-v1.1_software.html\" rel=\"noopener\" title=\"Software setup\/tutorials\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1011-v1.1_hardware.html\" rel=\"noopener\" title=\"Hardware information and assembly\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x SupTronics X1011 Bottom-Mount Quad-NVMe Add-on for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x PCIe FFC 37mm\u003c\/li\u003e\n\u003cli\u003e1x Screw\/standoff pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, power supply, SSDs and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":55090829918593,"sku":"X1011","price":44.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1011-bottom-mount-quad-nvme-add-on-for-raspberry-pi-5-suptronics-x1011-1211303203.jpg?v=1765831994"},{"product_id":"suptronics-x1015-nvme-add-on-for-raspberry-pi-5","title":"SupTronics X1015 NVMe Add-on for Raspberry Pi 5","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Suptronics\" href=\"\/collections\/suptronics\"\u003eSuptronics\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eX1015\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis an SSD expansion board for\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Raspberry Pi 5\" href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e, allowing you to attach full-size \u003cstrong\u003e2280-format M.2 NVMe drives (as well as 2260, 2242, and 2230)\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003evia the PCIe 2.0\/3.0 interface. It supports data transfer rates of up to 8Gbps.\u003c\/p\u003e \u003cp\u003eDesigned to mount on top of the Raspberry Pi 5, it features a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003epass-through 40-pin header for continued GPIO access\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand supports use with other HATs. The cut-away form factor is compatible with the\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Raspberry Pi Active Cooler\" href=\"\/products\/active-cooler-for-raspberry-pi-5\"\u003eRaspberry Pi Active Cooler\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003eMounting holes and the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eincluded standoffs\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ehelp secure the board to your Raspberry Pi 5. \u003cstrong\u003eBuilt-in LED\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eindicators\u003c\/strong\u003e show power and read\/write drive activity.\u003c\/p\u003e \u003cp\u003eYou can boot directly from an SSD, improving application load times, file transfer speeds, and performance in tasks like web serving or building a local media server or NAS.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRaspberry Pi, SSD and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible with Raspberry Pi 5\u003c\/li\u003e \u003cli\u003eSupports up to 4TB M.2 NVMe solid-state drives\u003c\/li\u003e \u003cli\u003eSupports two M.2 NVMe SSD form factors: \u003cspan\u003e2280, 2260, 2242, and 2230\u003c\/span\u003e\n\u003c\/li\u003e \u003cli\u003eSupports PCIe 2.0 5Gbps \/ PCIe 3.0 8Gbps\u003c\/li\u003e \u003cli\u003eCompatible with the Raspberry Pi Active Cooler\u003c\/li\u003e \u003cli\u003eLED indicators displays power and drive status\u003c\/li\u003e \u003cli\u003ePowered via GPIO converted to 3.3V max 3A to power the SSD\u003c\/li\u003e \u003cli\u003eStackable design allows for attachment of other HATs\u003c\/li\u003e \u003cli\u003ePowered through the 40-pin GPIO header\u003c\/li\u003e \u003cli\u003e\u003cstrong\u003eNot compatible with M.2\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSATA\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eSSDs, M.2 PCIe\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAHCI\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eSSDs, or other M.2 \u003cspan style=\"text-decoration: underline;\"\u003enon-NVMe\u003c\/span\u003e devices\u003c\/strong\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eSpecifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003ePower supply: 5Vdc +\/-5% power via GPIO pin header, converted to 3.3V max 3A to power the SSD\u003c\/li\u003e \u003cli\u003ePorts \u0026amp; Connectors: PCIe connector - 16-pin pitch 0.5mm\u003c\/li\u003e \u003cli\u003eSSD connector: M.2 M-Key\u003c\/li\u003e \u003cli\u003ePCIe cable length: 40mm\u003c\/li\u003e \u003cli\u003ePCB Size: 87mm x 56.5mm\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eCompatibility\u003c\/h3\u003e \u003cp\u003eAs with all M.2 NVMe adapters for Raspberry Pi 5, certain models of M.2 NVMe SSD (usually with a Phison controller) are best avoided due to compatibility issues.\u003c\/p\u003e \u003cp\u003eThe following models have been highlighted by SupTronics as having poor compatibility, however other online resources will highlight further models\/brands to avoid:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eWD Blue SN550\/SN580 series\u003c\/li\u003e \u003cli\u003eWD Green SN350 series\u003c\/li\u003e \u003cli\u003eWD Black SN850 series\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\u003ca title=\"Software setup\/tutorials\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x100x-v1.0_software.html\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca title=\"Hardware information and assembly\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1015-v1.2_hardware.html\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x SupTronics V1.2 X1015 NVMe Add-on for Raspberry Pi 5\u003c\/li\u003e \u003cli\u003e1x Screw and stand-off pack\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eRaspberry Pi, SSD and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":55098181321089,"sku":"X1015","price":9.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1015-nvme-add-on-for-raspberry-pi-5-suptronics-x1015-1211546007.jpg?v=1765983318"},{"product_id":"suptronics-x1100-usb-to-sata-2-5-add-on-for-raspberry-pi-5","title":"SupTronics X1100 USB to SATA 2.5\" Add-on for Raspberry Pi 5","description":"\u003cp\u003eWhilst NVMe SSDs connected via PCIe might be king in terms of speed, attaching \u003ca href=\"\/products\/wd-green-240gb-2-5-ssd\" title=\"SATA SSDs\"\u003eSATA SSDs\u003c\/a\u003e to your \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e via USB 3.0 is still a great option with up to 5Gbps. This \u003cstrong\u003eX1100\u003c\/strong\u003e 2.5\" SATA HDD\/SSD add-on from \u003ca href=\"\/collections\/suptronics\" title=\"SupTronics\"\u003eSupTronics\u003c\/a\u003e allows you to make use of any 2.5\" SATA SSD\/HDD drives you're no longer using - great for media server storage and similar projects.\u003c\/p\u003e\n\u003cp\u003eThe add-on \u003cstrong\u003esupports standard 2.5\" SATA hard drives and SSDs\u003c\/strong\u003e, offering fast data transfer speeds via its \u003cstrong\u003eUSB 3.0 port (up to 5Gbps)\u003c\/strong\u003e. Designed to mount neatly beneath your Pi, the board includes mounting holes and a pack of standoffs, and a \u003cstrong\u003ebuilt-in LED showing read\/write activity\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe X1100 is ideal for creating a media server or building your own NAS. You can also boot the operating system from your drive for quicker load times and better overall performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, SSD and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eImportant notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe Raspberry Pi \u003ca href=\"\/products\/raspberry-pi-27w-usb-c-power-supply\" title=\"27W USB-C Power Supply\"\u003e27W USB-C Power Supply\u003c\/a\u003e is recommended, which provides up to 5A current at +5.1V to drive your hard drives\u003c\/li\u003e\n\u003cli\u003eIf you are using a power supply that cannot provide 5A at +5V, setting \u003cstrong\u003eusb_max_current_enable=1\u003c\/strong\u003e in the \u003cstrong\u003e\/boot\/firmware\/config.txt\u003c\/strong\u003e file will override this and increases the USB current limit to 1.6A.\u003c\/li\u003e\n\u003cli\u003eUSB 3.0 devices might generate radio frequency interference that can cause Wi-Fi and other wireless devices operating in the 2.4GHz band to have issues communicating with your Raspberry Pi 5. To avoid interference on the 2.4GHz band using Wi-Fi, try using the 5GHz band instead. If the problem still exists, consider turning off Wi-Fi and using a wired network instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2.5\" SATA HDD\/SSD add-on for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5 only\u003c\/li\u003e\n\u003cli\u003eSupports up to 5TB 2.5\" \u003cstrong\u003eSATA\u003c\/strong\u003e \u003cstrong\u003eHDDs and SSDs\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not support NVMe SSDs\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated USB 3.1 Gen1 to SATA 6Gb\/s bridge controller\n\u003cul\u003e\n\u003cli\u003eUSB 3.1 Gen1 (5Gbps) plug-and-play connection\u003c\/li\u003e\n\u003cli\u003eAlso compatible with USB 2.0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports booting the OS from HDD\/SSD\u003c\/li\u003e\n\u003cli\u003eUSB bus-powered – no extra power supply needed\u003c\/li\u003e\n\u003cli\u003eBlue LED indicates drive status\u003c\/li\u003e\n\u003cli\u003eNo additional cables required\u003c\/li\u003e\n\u003cli\u003eMounting holes and standoffs for stable Pi and shield assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5Vdc ±5%, 1.3A via USB 3.0 port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePorts \u0026amp; connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB socket – USB 3.0 Type-A\u003cbr\u003eSATA HDD connector – 7P+15P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCB size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e107.5mm × 85mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Software setup\/tutorials\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1100-v1.0_software.html\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Hardware information and assembly\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1100-v1.0_hardware.html\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x SupTronics X1100 USB to SATA 2.5\" Add-on for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x USB connector\u003c\/li\u003e\n\u003cli\u003e1x Screw\/standoff pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, SSD and Active Cooler not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":55098321142145,"sku":"X1100","price":23.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1100-usb-to-sata-2-5-add-on-for-raspberry-pi-5-suptronics-x1100-1211546006.jpg?v=1765983203"},{"product_id":"suptronics-x1501-dual-ethernet-dual-nvme-io-board-for-cm5","title":"SupTronics X1501 Dual Ethernet Dual NVMe IO Board for CM5","description":"\u003cp\u003eThe \u003ca href=\"\/collections\/suptronics\" title=\"Suptronics\"\u003eSupTronics\u003c\/a\u003e \u003cstrong\u003eX1501 \u003c\/strong\u003eis a compact IO board designed for the \u003ca title=\"Raspberry Pi Compute Module 5 (CM5)\" href=\"\/products\/raspberry-pi-compute-module-5\"\u003eRaspberry Pi Compute Module 5 (CM5)\u003c\/a\u003e, combining \u003cstrong\u003edual Ethernet ports\u003c\/strong\u003e, \u003cstrong\u003etwo M.2 NVMe slots\u003c\/strong\u003e, and a wide range of I\/O into a single 87×88×25mm board. When used with a compatible PoE HAT, it \u003cstrong\u003ecan support both 1GbE with PoE+ and 2.5GbE for high-speed networking up to 2.5Gbps\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eStorage is handled by two full-size M.2 2280 NVMe sockets for up to 8TB total capacity over PCIe 2.0 (5Gbps). The board can also support 2260 sticks, as well as 2230 or 2242 when using the \u003cstrong\u003eincluded adapters\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe board includes\u003cstrong\u003e two full-size HDMI 2.0 ports\u003c\/strong\u003e, supporting dual 4K output, and \u003cstrong\u003etwin 22-pin MIPI DSI\/CSI-2 connectors\u003c\/strong\u003e for Raspberry Pi camera and display modules. A \u003cstrong\u003emicroSD slot\u003c\/strong\u003e is provided for CM5 Lite variants. The \u003cstrong\u003estandard 40-pin GPIO header\u003c\/strong\u003e, and support for PWM-controlled fans allow for broad compatibility and thermal management in embedded use.\u003c\/p\u003e\n\u003cp\u003eAll major ports - \u003cstrong\u003eUSB, HDMI, Ethernet, and power - are aligned along one edge\u003c\/strong\u003e, making case integration simple. Additional features include a USB-C port for both power and eMMC flashing, a power button for controlled startup\/shutdown, and \u003cstrong\u003ejumper settings for disabling features\u003c\/strong\u003e such as wireless or EEPROM write access. A \u003ca href=\"\/products\/cr1220-12mm-diameter-3v-lithium-coin-cell-battery\" title=\"CR1220 3V Lithium Coin Cell Battery\"\u003eCR1220\u003c\/a\u003e\u003cstrong\u003e RTC battery socket\u003c\/strong\u003e (\u003cstrong\u003ebattery\u003c\/strong\u003e \u003cstrong\u003enot included\u003c\/strong\u003e) is included to retain timekeeping through power loss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCM5, Heatsink\/cooler, NVMe drives and power supply not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Design:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e87mm x 88mm x 25mm footprint\u003c\/li\u003e\n\u003cli\u003eSmall form factor with a wide range of I\/O options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Ethernet Ports:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e1GbE port with PoE+ support \u003cstrong\u003e(requires PoE+ HAT+)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e2.5GbE port supporting speeds up to 2.5Gbps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual M.2 NVMe SSD Slots:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eTwo full-size M.2 2280 PCIe 2.0 slots (5Gbps)\n\u003cul\u003e\n\u003cli\u003eAlso supports 2260\u003c\/li\u003e\n\u003cli\u003e2242 and 2230 supported via included adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eUp to 8TB total storage (4TB + 4TB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI Output:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eTwo full-size HDMI 2.0 ports\u003c\/li\u003e\n\u003cli\u003eSupports dual 4K display output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera \u0026amp; Display Integration:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eDual 22-pin MIPI DSI\/CSI-2 connectors (0.5mm pitch)\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5 CSI and DSI modules\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Options:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eMicroSD card slot for Compute Module 5 Lite (non-eMMC) variants\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaspberry Pi HAT+ Support:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi HAT+ boards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl \u0026amp; Monitoring:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eOnboard power button to wake\/shut down the Compute Module 5\u003c\/li\u003e\n\u003cli\u003eCR1220 RTC battery socket for maintaining system time \u003cstrong\u003e(battery not included)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfigurable jumpers to disable wireless or EEPROM access\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Support:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e4-pin PWM fan connector for active cooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Port:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eUsed for both power input and OS image loading to CM5 eMMC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Layout:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eAll major ports grouped along one edge for tidy cable management and easy enclosure design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e5.1Vdc +\/-5% 5A via USB-C power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eUSB-C (Power in and OS image loading)\u003c\/li\u003e\n\u003cli\u003e1 Gigabit RJ45 Ethernet with PoE+ HAT+ support (requires \u003ca title=\"Raspberry Pi PoE+ HAT\" href=\"\/products\/raspberry-pi-poe-plus-hat\"\u003eRaspberry Pi PoE+ HAT\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 Type-A\u003c\/li\u003e\n\u003cli\u003eUSB 3.0 Type-A\u003c\/li\u003e\n\u003cli\u003e2.5 Gigabit RJ45 Ethernet\u003c\/li\u003e\n\u003cli\u003eStandard 40-pin GPIO header\u003c\/li\u003e\n\u003cli\u003eMicroSD card socket for Compute Module 5 Lite modules\u003c\/li\u003e\n\u003cli\u003e2 x M.2 M key NVMe sockets\u003c\/li\u003e\n\u003cli\u003e4-pin fan connector (Pi 5 style)\u003c\/li\u003e\n\u003cli\u003e2 x MIPI DSI\/CSI-2 FPC connectors (22-pin 0.5 mm pitch cable)\u003c\/li\u003e\n\u003cli\u003eRTC battery socket (CR1220 - battery not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e2 x full-size HDMI 2.0 connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput power:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eExternal +5V USB-C PSU\u003c\/li\u003e\n\u003cli\u003ePower button to wake and shut down Compute Module 5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm factor:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e85mm x 87mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Software setup\/tutorials\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/cm5\/x1501-v1.0_software.html\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Hardware information and assembly\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/cm5\/x1501-v1.0_hardware.html\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x SupTronics X1501 Dual Ethernet Dual NVMe IO Board for CM5\u003c\/li\u003e\n\u003cli\u003e2x M.2 extension boards \u003cem\u003e(enables support for shorter 2230 and 2242 NVMe SSDs)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e3x 2.54mm Jumper caps\u003c\/li\u003e\n\u003cli\u003e1x Screw\/Standoff pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCM5, Heatsink\/cooler, NVMe drives and power supply not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":55120842981761,"sku":"X1501","price":62.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1501-dual-ethernet-dual-nvme-io-board-for-cm5-suptronics-x1501-1212789163.jpg?v=1766428390"},{"product_id":"suptronics-x1507-fanless-dual-nvme-io-board-for-cm5","title":"SupTronics X1507 Fanless Dual NVME IO Board for CM5","description":"\u003cp\u003eThe \u003ca href=\"\/collections\/suptronics\" title=\"SupTronics\"\u003eSupTronics\u003c\/a\u003e \u003cstrong\u003eX1507\u003c\/strong\u003e is a high-performance, \u003cstrong\u003efanless\u003c\/strong\u003e \u003cstrong\u003eI\/O carrier board\u003c\/strong\u003e designed for the \u003ca href=\"\/products\/raspberry-pi-compute-module-5\" title=\"Raspberry Pi Compute Module 5 (CM5)\"\u003eRaspberry Pi Compute Module 5 (CM5)\u003c\/a\u003e, offering \u003cstrong\u003edual M.2 NVMe slots\u003c\/strong\u003e and a streamlined layout for effortless integration.\u003c\/p\u003e \u003cp\u003eIts ultra-compact, \u003cstrong\u003efully passive design\u003c\/strong\u003e positions all user connectors on the top side while housing components and the CM5 underneath, simplifying enclosure design and enabling silent, dust-free operation. The X1507 accelerates development with compatibility for \u003ca href=\"\/collections\/raspberry-pi-hats\" title=\"Raspberry Pi HATs\"\u003eRaspberry Pi HATs\u003c\/a\u003e and \u003cstrong\u003e2230 and 2242-format NVMe SSDs\u003c\/strong\u003e, delivering flexibility, reliability, and high-speed performance in a fanless package.\u003c\/p\u003e \u003cp\u003eThe board features a \u003cstrong\u003e1Gb Ethernet port with PoE+ support\u003c\/strong\u003e \u003cstrong\u003e(separate HAT required, coming soon!)\u003c\/strong\u003e, \u003cstrong\u003etwo M.2 NVMe slots (2230\/2242)\u003c\/strong\u003e supporting up to 8TB over PCIe 2.0, \u003cstrong\u003etwo full-size HDMI ports\u003c\/strong\u003e for dual 4K output, and \u003cstrong\u003etwo USB 3.2 Gen 1 ports\u003c\/strong\u003e (5Gbps). \u003cstrong\u003eTwo 22-pin MIPI DSI\/CSI-2 connectors\u003c\/strong\u003e (0.5mm pitch) support Raspberry Pi 5 cameras and displays.\u003c\/p\u003e \u003cp\u003eA \u003cstrong\u003emicroSD slot\u003c\/strong\u003e is available for CM5 Lite. It includes a\u003cstrong\u003e power button\u003c\/strong\u003e, \u003ca href=\"\/products\/cr1220-12mm-diameter-3v-lithium-coin-cell-battery\" title=\"CR1220 3V Lithium Coin Cell Battery\"\u003eCR1220\u003c\/a\u003e\u003cstrong\u003e RTC socket (battery not included)\u003c\/strong\u003e, \u003cstrong\u003e4-pin fan connector\u003c\/strong\u003e, \u003cstrong\u003eUSB-C for power and OS loading\u003c\/strong\u003e, and \u003cstrong\u003ejumpers to disable wireless or EEPROM\u003c\/strong\u003e. \u003cstrong\u003eAll I\/O ports are grouped on one edge\u003c\/strong\u003e for clean cable management.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCM5, NVMe SSD, RTC battery and power supply not included.\u003c\/strong\u003e\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible with Raspberry Pi Compute Module 5\u003c\/li\u003e \u003cli\u003ePassive fanless design for silent, dust-free operation\u003c\/li\u003e \u003cli\u003eThermal test: 38°C at idle, 58°C under 30-min stress\u003c\/li\u003e \u003cli\u003eAll connectors on top side for easy enclosure integration\u003c\/li\u003e \u003cli\u003eDual M.2 NVMe slots (2242\/2230) up to 8TB, PCIe 2.0\u003c\/li\u003e \u003cli\u003e1GbE port with PoE+ support\u003c\/li\u003e \u003cli\u003eDual full-size HDMI 2.0 ports for dual 4K displays\u003c\/li\u003e \u003cli\u003eDual USB 3.2 Gen 1 ports (5Gbps)\u003c\/li\u003e \u003cli\u003eDual 22-pin MIPI DSI\/CSI-2 connectors (0.5mm pitch)\u003c\/li\u003e \u003cli\u003eMicroSD slot for CM5 Lite variants\u003c\/li\u003e \u003cli\u003ePower button for CM5 wake\/shutdown\u003c\/li\u003e \u003cli\u003eCR1220 RTC battery socket (battery not included)\u003c\/li\u003e \u003cli\u003e4-pin fan connector\u003c\/li\u003e \u003cli\u003eUSB-C for power and OS loading\u003c\/li\u003e \u003cli\u003eJumper control for Wi-Fi and EEPROM settings\u003c\/li\u003e \u003cli\u003ePorts grouped on one edge for clean cable layout\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eSpecifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e5.1Vdc ±5% 5A via USB-C power supply (\u003cstrong\u003eRaspberry Pi 27W PSU recommended)\u003c\/strong\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e \u003cul\u003e \u003cli\u003eUSB-C (Power in and OS image loading)\u003c\/li\u003e \u003cli\u003e1GbE RJ45 Ethernet with PoE+ HAT+ support\u003c\/li\u003e \u003cli\u003e2 × USB 3.0 Type-A\u003c\/li\u003e \u003cli\u003e2 × USB 2.0 Type-A\u003c\/li\u003e \u003cli\u003eStandard 40-pin GPIO header\u003c\/li\u003e \u003cli\u003emicroSD card socket for CM5 Lite modules\u003c\/li\u003e \u003cli\u003e2 × M.2 M key NVMe sockets\u003c\/li\u003e \u003cli\u003e4-pin fan connector\u003c\/li\u003e \u003cli\u003e2-pin RTC battery connector\u003c\/li\u003e \u003cli\u003e2 × MIPI DSI\/CSI-2 FPC connectors (22-pin, 0.5mm pitch)\u003c\/li\u003e \u003cli\u003eRaspberry Pi HAT+ connector\u003c\/li\u003e \u003cli\u003eRTC battery socket\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eVideo:\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e2 × full-size HDMI 2.0 connectors\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eInput power:\u003c\/strong\u003e \u003cul\u003e \u003cli\u003eExternal +5V USB-C PSU\u003c\/li\u003e \u003cli\u003ePower button to wake and shut down Compute Module 5\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eForm factor:\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e85mm × 85mm\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHeatsink size:\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e85mm × 85mm × 12mm (L×W×H)\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\u003ca title=\"Software setup\/tutorials\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/cm5\/x1507-v1.0_software.html\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca title=\"Hardware information and assembly\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/cm5\/x1507-v1.0_hardware.html\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x SupTronics X1507 Fanless Dual NVME IO Board for CM5\u003c\/li\u003e \u003cli\u003e1x Heatsink\u003c\/li\u003e \u003cli\u003e32 2.54mm Jumper caps\u003c\/li\u003e \u003cli\u003e1x Screw\/Standoff pack\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCM5, NVMe SSD, RTC battery and power supply not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":55121310384513,"sku":"X1507","price":62.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1507-fanless-dual-nvme-io-board-for-cm5-suptronics-x1507-1212841338.jpg?v=1766452750"},{"product_id":"poe-m-2-hat-c-for-raspberry-pi-5","title":"PoE M.2 HAT+ (C) for Raspberry Pi 5","description":"\u003cp\u003eThis PCIe HAT+ from \u003ca href=\"\/collections\/waveshare\" title=\"Waveshare\"\u003eWaveshare\u003c\/a\u003e gives you an \u003cstrong\u003eM.2 slot\u003c\/strong\u003e for 2230\/2242 NVMe SSDs, \u003cstrong\u003e802.3af\/at PoE\u003c\/strong\u003e with \u003cstrong\u003e5V 5A output\u003c\/strong\u003e and is \u003cstrong\u003ecompatible with the\u003c\/strong\u003e \u003ca href=\"\/products\/active-cooler-for-raspberry-pi-5\" title=\"Raspberry Pi Active Cooler\"\u003eRaspberry Pi Active Cooler\u003c\/a\u003e. It's essentially a 2-in-1 HAT for your \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e, giving you a PCIe M.2 HAT combined with a PoE+ HAT!\u003c\/p\u003e\n\u003cp\u003eThe M.2 slot is controlled via PCIe and \u003cstrong\u003esupports 2230 or 2242 M.2\u003c\/strong\u003e \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"Raspberry Pi SSD\"\u003eNVMe SSDs\u003c\/a\u003e, with the option to use this as a boot drive or storage. The PoE capability is \u003cstrong\u003ePoE+\u003c\/strong\u003e compliant (802.3af\/\u003cstrong\u003eat\u003c\/strong\u003e), using an efficient planar PoE transformer to provide 5V 5A required by Raspberry Pi 5. A 30W or greater \u003ca href=\"\/products\/tp-link-tl-poe160s-30w-poe-injector\" title=\"PoE injector\"\u003ePoE injector\u003c\/a\u003e or switch is recommended.\u003c\/p\u003e\n\u003cp\u003eThe board also features \u003cstrong\u003eLED indicators for SSD activity and power\u003c\/strong\u003e, as well as a \u003cstrong\u003eslot to pass through camera\/display (CSI\/DSI) cables\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGPIO pins can be accessed\u003c\/strong\u003e once fitted, thanks to the included riser header. \u003cstrong\u003eThe package also contains all other accessories you'll need\u003c\/strong\u003e - M.2 mount screw, PCIe flex cable and metal mounting hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2-in-1 PCIe M.2 and PoE+ HAT+ for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003ePCIe-controlled M.2 slot supporting 2230 and 2242 NVMe SSDs\u003c\/li\u003e\n\u003cli\u003eNVMe SSD can be used for boot or storage\u003c\/li\u003e\n\u003cli\u003ePoE+ support compliant with IEEE 802.3af\/at\u003c\/li\u003e\n\u003cli\u003eProvides 5V 5A output suitable for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eDesigned for use with a 30W or higher PoE injector or switch\u003c\/li\u003e\n\u003cli\u003eCompatible with the Raspberry Pi Active Cooler\u003c\/li\u003e\n\u003cli\u003eLED indicators for power and SSD activity\u003c\/li\u003e\n\u003cli\u003eCSI\/DSI cable pass-through slot for camera or display connections\u003c\/li\u003e\n\u003cli\u003eGPIO access maintained via included riser header\u003c\/li\u003e\n\u003cli\u003eIncludes M.2 mounting screw, PCIe flex cable, and metal mounting hardware\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5 only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePoE power input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e37V ~ 57V DC in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGPIO header: 5V 5A (MAX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e56.5 × 66.0 (mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetwork standard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIEEE 802.3af\/at PoE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveshare.com\/wiki\/PoE_M.2_HAT+_(C)\" rel=\"noopener\" title=\"Product Wiki\" target=\"_blank\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/files.waveshare.com\/wiki\/PoE_M.2_HAT_Plus_C\/PoE_M.2_HAT%2B_(C)_V1.1_3D.zip\" rel=\"noopener\" title=\"3D file\" target=\"_blank\"\u003e3D file\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: If a power supply limitation prompt appears, add \u003cstrong\u003eusb_max_current_enable=1\u003c\/strong\u003e to \u003cstrong\u003e\/boot\/firmware\/config.txt\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x PCIe to M.2 PoE HAT+ (C) for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x 40-pin GPIO riser header\u003c\/li\u003e\n\u003cli\u003e1x PoE 4-pin riser header\u003c\/li\u003e\n\u003cli\u003e1x PCIe flex cable (40mm)\u003c\/li\u003e\n\u003cli\u003e1x Fixings\/standoff pack\u003c\/li\u003e\n\u003cli\u003e1x M.2 Mounting screw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":55261946577281,"sku":"WAV-31536","price":24.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/poe-m-2-hat-c-for-raspberry-pi-5-waveshare-wav-31536-1217793046.jpg?v=1769086510"},{"product_id":"usb-3-2-gen1-and-m-2-hat-for-raspberry-pi-5","title":"USB 3.2 Gen1 and M.2 HAT+ for Raspberry Pi 5","description":"\u003cp\u003eThis \u003cstrong\u003eHAT+\u003c\/strong\u003e from \u003ca href=\"\/collections\/waveshare\" title=\"Waveshare\"\u003eWaveshare\u003c\/a\u003e gives your \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e a PCIe M.2 interface for NVMe devices such as \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"SSDs\"\u003eSSDs\u003c\/a\u003e, whilst also providing four additional USB 3.2 ports for peripherals \u003cem\u003e(think keyboards, printers, gamepads and more!)\u003c\/em\u003e.\u003c\/p\u003e\n\u003cp\u003eStacking on top of your Pi 5, this HAT \u003cstrong\u003econnects to the Pi 5's PCIe port\u003c\/strong\u003e via the \u003cstrong\u003eincluded PCIe cable\u003c\/strong\u003e, but maintains \u003cstrong\u003efull GPIO pin access\u003c\/strong\u003e via the extended header. You can also use this HAT with an \u003ca href=\"\/products\/active-cooler-for-raspberry-pi-5\" title=\"Active Cooler\"\u003eActive Cooler\u003c\/a\u003e fitted.\u003c\/p\u003e\n\u003cp\u003eThe M.2 slot can accommodate \u003cstrong\u003e2230, 2242, 2260 or 2280\u003c\/strong\u003e-format M.2 devices (\u003cem\u003eofficially\u003c\/em\u003e in Gen2 mode), with the popular option being an NVMe SSD for fast, high-capacity storage, or as a boot drive. The \u003cstrong\u003efour onboard USB ports\u003c\/strong\u003e are high-speed \u003cstrong\u003eUSB 3.2 Gen1\u003c\/strong\u003e spec, great for a range of USB devices including \u003ca href=\"\/products\/raspberry-pi-flash-drive\" title=\"USB 3 flash drives\"\u003eUSB 3 flash drives\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe HAT includes a\u003cstrong\u003e power monitoring chip\u003c\/strong\u003e, providing real-time monitoring of SSD drive power status, and an onboard \u003cstrong\u003eEEPROM\u003c\/strong\u003e. Metal fixings\/standoffs are included. \u003cstrong\u003eLED indicators\u003c\/strong\u003e show power and read\/write activity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5 (requires PCIe port)\u003c\/li\u003e\n\u003cli\u003eSupports NVMe protocol M.2 interface SSDs\u003c\/li\u003e\n\u003cli\u003eCompatible with M.2 hard in 2230 \/ 2242 \/ 2260 \/ 2280 format\u003c\/li\u003e\n\u003cli\u003eSupports PCI-E×1 Gen2 mode\u003c\/li\u003e\n\u003cli\u003eOnboard operational indicator lights\n\u003cul\u003e\n\u003cli\u003ePWR is continuously lit when powered on\u003c\/li\u003e\n\u003cli\u003eACT blinks during read and write operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eEquipped with VL805 high-performance main control chip\u003c\/li\u003e\n\u003cli\u003eSupports USB power control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveshare.com\/wiki\/PCIe_TO_M.2_USB_HAT+\" rel=\"noopener\" title=\"Product Wik\" target=\"_blank\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x USB 3.2 Gen1 M.2 HAT+ for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x PCIe cable (40mm)\u003c\/li\u003e\n\u003cli\u003e1x Fixings\/standoffs pack (includes M.2 screw)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":55384694096257,"sku":"WAV-31436","price":24.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/usb-3-2-gen1-and-m-2-hat-for-raspberry-pi-5-waveshare-wav-31436-1224873169.jpg?v=1772585650"},{"product_id":"4-channel-m-2-adapter-for-raspberry-pi-5","title":"4-Channel M.2 Adapter for Raspberry Pi 5","description":"\u003cp\u003eWhilst we offer a growing range of \u003ca href=\"\/collections\/raspberry-pi-ssd-hats\" title=\"SSD HATs for Raspberry Pi 5\"\u003eSSD HATs for Raspberry Pi 5\u003c\/a\u003e, not many of them can accept four \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"Raspberry Pi SSD\"\u003eNVMe SSDs\u003c\/a\u003e - and even fewer include a power supply to handle the power requirements!\u003c\/p\u003e\n\u003cp\u003eThis is \u003ca href=\"\/collections\/waveshare\" title=\"Waveshare's\"\u003eWaveshare's\u003c\/a\u003e \u003cstrong\u003e4-Channel M.2 Adapter\u003c\/strong\u003e for \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e. It uses the Pi 5's PCIe connection along with an \u003cstrong\u003eASMedia ASM1184e packet switch\u003c\/strong\u003e to allow you to \u003cstrong\u003euse four NVMe devices with a single Raspberry Pi\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eEach slot \u003cstrong\u003ecan accept 2230, 2242, 2260 or 2280-format NVMe devices\u003c\/strong\u003e, and includes M.2 fixing screws to keep them securely in place. \u003cstrong\u003eEach M.2 slot has its own indicator LED\u003c\/strong\u003e at the edge of the board. There is also a \u003cstrong\u003epower LED\u003c\/strong\u003e (controlled by the PCIe power enable signal).\u003c\/p\u003e\n\u003cp\u003eA \u003cstrong\u003e12V 4A UK power supply (barrel jack) is included\u003c\/strong\u003e, along with a PCIe cable, GPIO powering cable and a set of fixings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and NVMe devices not included. This product contains a three-pin UK power supply.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5 only\u003c\/li\u003e\n\u003cli\u003eConnects up to four NVMe devices to Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eFeatures four M.2 M-key slots\n\u003cul\u003e\n\u003cli\u003eSupports 2230, 2242, 2260 and 2280 M.2 NVMe drives\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports NVMe protocol drives\u003c\/li\u003e\n\u003cli\u003eASMedia ASM1184e packet switch\u003c\/li\u003e\n\u003cli\u003eSupports booting Raspberry Pi 5 from NVMe SSD\u003c\/li\u003e\n\u003cli\u003eIncludes indicator LEDs for each M.2 slot\u003c\/li\u003e\n\u003cli\u003eIncludes onboard power LED\u003c\/li\u003e\n\u003cli\u003eCan supply power to Pi 5 via included GPIO cable\u003c\/li\u003e\n\u003cli\u003eAlso supports some CM5 baseboards with PCIe 16-pin\u003c\/li\u003e\n\u003cli\u003eIncludes a 12V 4A UK power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveshare.com\/wiki\/PCIE_TO_4-CH_NVME_Board_(B)\" rel=\"noopener\" title=\"Product Wiki\" target=\"_blank\"\u003eProduct Wiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 4-Channel M.2 Adapter for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x UK 12V 4A Barrel jack power supply\u003c\/li\u003e\n\u003cli\u003e1x PH2.0 3-pin GPIO cable\u003c\/li\u003e\n\u003cli\u003e1x 16-pin PCIe cable - 40mm\u003c\/li\u003e\n\u003cli\u003e1x Fixings pack (includes M.2 screws)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and NVMe devices not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":55392761971073,"sku":"WAV-30675","price":31.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/4-channel-m-2-adapter-for-raspberry-pi-5-waveshare-wav-30675-1226199217.jpg?v=1772837889"},{"product_id":"suptronics-x1208-ups-m-2-2280-nvme-ssd-shield","title":"SupTronics X1208 UPS + M.2 2280 NVMe Add-on for Raspberry Pi 5","description":"\u003cp\u003eThe \u003ca title=\"SupTronics Products\" href=\"\/collections\/suptronics\"\u003eSupTronics\u003c\/a\u003e X1208 UPS + PoE Shield for\u003ca title=\"Raspberry Pi 5\" href=\"\/products\/raspberry-pi-5\"\u003e Raspberry Pi 5\u003c\/a\u003e \u003cstrong\u003ecombines backup power and high-speed storage in a single add-on\u003c\/strong\u003e, designed to keep your system running reliably while protecting your data.\u003c\/p\u003e\n\u003cp\u003eIt provides a stable \u003cstrong\u003e5.1V \/ 5A backup power supply\u003c\/strong\u003e, making it suitable for demanding Raspberry Pi setups with multiple peripherals or higher workloads. The onboard power management system monitors the Pi’s state and automatically cuts power after shutdown to conserve battery, while maintaining ultra-low standby consumption. It also handles \u003cstrong\u003eseamless switching between external power and battery\u003c\/strong\u003e backup, with support for features such as auto power-on, AC power loss detection, and safe shutdown when battery levels are low.\u003c\/p\u003e\n\u003cp\u003eThe shield includes a \u003cstrong\u003esingle 21700 battery holder\u003c\/strong\u003e (up to 5000mAh) and \u003cstrong\u003esupports charging at up to 1500mA\u003c\/strong\u003e. Battery status and control can be accessed via GPIO, with \u003cstrong\u003ebuilt-in protections for overcurrent, overvoltage, and reverse polarity\u003c\/strong\u003e. A Maxim fuel gauge allows monitoring of battery voltage and percentage over I2C, and onboard LEDs indicate charge levels at 25%, 50%, 75%, and 100%. \u003cstrong\u003ePower is supplied via USB-C\u003c\/strong\u003e, so there’s no need to change your existing adapter, and the board connects directly through the 40-pin header without additional cables or soldering.\u003c\/p\u003e\n\u003cp\u003eFor storage, the \u003cstrong\u003eintegrated M.2 M-key slot supports NVMe SSDs up to 4TB, including common form factors such as 2280, 2242, and 2230\u003c\/strong\u003e. It supports booting the operating system directly from the SSD and offers \u003cstrong\u003efast data transfer speeds via PCIe 2.0 (5Gbps) or PCIe 3.0 (8Gbps)\u003c\/strong\u003e. A high-efficiency converter \u003cstrong\u003edelivers up to 3.5A to the SSD\u003c\/strong\u003e, and the design remains compatible with the official \u003ca title=\"Active Cooler for Raspberry Pi 5\" href=\"\/products\/active-cooler-for-raspberry-pi-5\"\u003eRaspberry Pi Active Cooler\u003c\/a\u003e. A blue LED provides status indication for power and drive activity.\u003c\/p\u003e\n\u003cp\u003eAdditional features include a push button that mirrors the \u003ca title=\"Official Raspberry Pi Products\" href=\"\/collections\/raspberry-pi\"\u003eRaspberry Pi\u003c\/a\u003e power button, onboard LEDs for system status, and advanced power-path management to reduce unnecessary battery cycling and extend lifespan.\u003c\/p\u003e\n\u003cp\u003eThe X1208 is \u003cstrong\u003ecompatible with the Raspberry Pi 5\u003c\/strong\u003e and can be used alongside accessories such as the \u003ca title='SupTronics X1100 USB to SATA 2.5\" Add-on for Raspberry Pi 5' href=\"\/products\/suptronics-x1100-usb-to-sata-2-5-add-on-for-raspberry-pi-5\"\u003eX1100 USB 3.0 to SATA 2.5\" HDD\/SSD shield\u003c\/a\u003e, as well as other add-on boards that do not use the PCIe interface and mount beneath the Pi.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: Raspberry Pi, 21700 battery and NVMe device not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry Pi 5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUPS Output:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt for continuous, long-lasting operation -providing unwavering power for always-on Raspberry Pi systems\u003c\/li\u003e\n\u003cli\u003eSupports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi applications\u003c\/li\u003e\n\u003cli\u003eIntegrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimise power loss\u003c\/li\u003e\n\u003cli\u003ePower the Pi directly through the 40-pin header, eliminating the need for cables and soldering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBattery Charging:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupports battery charging with a capacity of 1500mA\u003c\/li\u003e\n\u003cli\u003eBattery charging control can be managed via GPIO\u003c\/li\u003e\n\u003cli\u003eProvides protection against battery overcurrent and overvoltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in protection against reverse connection of battery cells\u003c\/li\u003e\n\u003cli\u003eIntegrated Maxim's fuel-gauge systems for reading battery voltage and percentage over i2c\u003c\/li\u003e\n\u003cli\u003eOn-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100%\u003c\/li\u003e\n\u003cli\u003eFeatures a single 21700 battery holder, supporting battery of up to 5000mAh\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower Input:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowered through the USB-C socket, eliminating the need to change your power adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Power Management:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeamless power switching between backup power and power adapter\u003c\/li\u003e\n\u003cli\u003eOn-board push button performs the same actions as the Pi's power button\u003c\/li\u003e\n\u003cli\u003eAutomatically cuts off power when the Pi is shut down\u003c\/li\u003e\n\u003cli\u003eOn-board LED indicates power status and Pi detection\u003c\/li\u003e\n\u003cli\u003eAC power loss and power adapter failure detection via GPIO\u003c\/li\u003e\n\u003cli\u003eAuto power-on when power is applied or restored\u003c\/li\u003e\n\u003cli\u003eAutomatic safe shutdown when battery voltage is low (programmable)\u003c\/li\u003e\n\u003cli\u003eUltra-low standby power consumption to maximise battery life\u003c\/li\u003e\n\u003cli\u003eAdvanced system power-path management to minimise frequent charging and discharging of batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eM.2 M key NVMe socket\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupports high-capacity M.2 NVMe solid-state drives up to 4TB\u003c\/li\u003e\n\u003cli\u003eAccommodates various M.2 NVMe SSD form factors, including 2280, 2242, and 2230\u003c\/li\u003e\n\u003cli\u003eSupports operating system booting from your SSD\u003c\/li\u003e\n\u003cli\u003eOffers fast data transfer speeds with PCIe 2.0 5Gbps \/ PCIe 3.0 8Gbps\u003c\/li\u003e\n\u003cli\u003eDoes not compromise cooling performance and is fully compatible with the official active cooler\u003c\/li\u003e\n\u003cli\u003eFeatures a blue LED indicator that displays power and drive status\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency converter delivers 3.5A to your SSD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Accessories\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eX1100 USB3 to SATA 2.5 HDD\/SSD shield for Pi 5\u003c\/li\u003e\n\u003cli\u003eOther add-on boards that do not use the PCIe interface are attached to the bottom of the Raspberry Pi.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"height: 180px; width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 34.3348%;\"\u003e\u003cstrong\u003ePower input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 65.4506%;\"\u003e5Vdc 5A via USB-C (Input current below 5A may cause improper operation.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 34.3348%;\"\u003e\u003cstrong\u003eUPS output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 65.4506%;\"\u003e5.1V ±5% Max 5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 34.3348%;\"\u003e\u003cstrong\u003eBattery charging current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 65.4506%;\"\u003e1.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 34.3348%;\"\u003e\u003cstrong\u003eTerminal Battery Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 65.4506%;\"\u003e4.23V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 34.3348%;\"\u003e\u003cstrong\u003eBattery Recharge Threshold\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 65.4506%;\"\u003e4.1V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 72px;\"\u003e\n\u003ctd style=\"height: 72px; width: 34.3348%;\"\u003e\u003cstrong\u003ePorts \u0026amp; Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 72px; width: 65.4506%;\"\u003eUSB-C power in connector x1\u003cbr\u003e1-cell 21700 battery connector x1\u003cbr\u003eSSD socket - M.2 KEY-M 67P x1\u003cbr\u003e40-pin extended GPIO header x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 34.3348%;\"\u003e\u003cstrong\u003ePCB Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 65.4506%;\"\u003e86.5mm x 84.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eSafety Instructions \u0026amp; Warnings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe default charging current is set to 1.5A and charge cut-off voltage is 4.23V. before connecting your battery to the UPS board, Please carefully confirm the maximum charging current and voltage, exceeding the upper limit of the charging specification that the battery can withstand will not only cause adverse reactions, but may also cause irreversible damage.\u003c\/li\u003e\n\u003cli\u003eIt is essential to read and understand these safety instructions and warnings before charging your batteries.\u003c\/li\u003e\n\u003cli\u003eLithium Polymer and Li-ion batteries are volatile. Failure to read and follow the instructions below may result in fire, personal injury, and damage to property if charged or used improperly.\u003c\/li\u003e\n\u003cli\u003eNever make a wrong polarity connection when charging or discharging battery packs. Always double-check the polarity of the battery's connector to ensure that \"+\" is connected to \"+\" and \"-\" is connected to \"-\".\u003c\/li\u003e\n\u003cli\u003eDo not mix and use old batteries with new batteries, or batteries with different brand names.\u003c\/li\u003e\n\u003cli\u003eLithium batteries have a limited cycle life. Please replace old batteries with new ones when they reach their service life or when they are two years old, whichever comes first.\u003c\/li\u003e\n\u003cli\u003eWhen charging the Battery Pack, please place the battery in a fireproof container. Do not leave the UPS shield on wood material or carpet unattended.\u003c\/li\u003e\n\u003cli\u003eKeep the UPS shield away from children to ensure their safety.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Software setup\/tutorials\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/Power_mgmt\/x120x-v1.0_software.html\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Hardware information and assembly\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/Power_mgmt\/x1208-v1.0_hardware.html\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x X1208 V1.0 UPS+NVMe board\u003c\/li\u003e\n\u003cli\u003e2x PCIe FFC cable 40mm\u003c\/li\u003e\n\u003cli\u003e4x Spacer M2.5 F\/F 13.5mm\u003c\/li\u003e\n\u003cli\u003e1x Screw Kit\u003c\/li\u003e\n\u003cli\u003e1x Pogo pin (For connecting to the Pi 5 PSW through hole)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: Raspberry Pi, 21700 battery and NVMe device not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":55490448523649,"sku":"X1208","price":34.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1208-ups-m-2-2280-nvme-add-on-suptronics-x1208-1230897060.jpg?v=1775062389"},{"product_id":"suptronics-x1001-max-high-power-nvme-add-on-for-raspberry-pi-5","title":"SupTronics X1001-MAX High-Power NVMe Add-on for Raspberry Pi 5","description":"\u003cp\u003eThe \u003ca title=\"SupTronics Products\" href=\"\/collections\/suptronics\"\u003eSupTronics\u003c\/a\u003e \u003cstrong\u003eX1001-Max\u003c\/strong\u003e is a\u003cstrong\u003e \u003c\/strong\u003ePCIe\u003cstrong\u003e high-power M.2 add-on\u003c\/strong\u003e for \u003ca title=\"Raspberry pi 5\" href=\"\/products\/raspberry-pi-5\"\u003eRaspberry Pi 5\u003c\/a\u003e, designed to support power-hungry M.2 devices such as large-capacity SSDs and AI accelerators.\u003c\/p\u003e\n\u003cp\u003eThe board supports \u003cstrong\u003eUSB-C PD input up to\u003c\/strong\u003e \u003cstrong\u003e120W\u003c\/strong\u003e or \u003cstrong\u003e9–20V DC input via \u003c\/strong\u003e\u003cstrong\u003ebarrel jack\u003c\/strong\u003e, with integrated DC-DC converters delivering \u003cstrong\u003e5.1V\/8A\u003c\/strong\u003e \u003cstrong\u003efor your Raspberry Pi 5\u003c\/strong\u003e \u003cstrong\u003eand 3.3V\/8A for M.2\u003c\/strong\u003e \u003cstrong\u003edevices\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eFeaturing a\u003cstrong\u003e \u003c\/strong\u003ePCIe 2.0\/3.0 interface with speeds up to \u003cstrong\u003e8 Gbps\u003c\/strong\u003e, it supports 2230, 2242, 2260 and 2280 format SSDs, is compatible with the official \u003ca title=\"Active Cooler for Raspberry Pi 5\" href=\"\/products\/active-cooler-for-raspberry-pi-5\"\u003eRaspberry Pi 5 Active Cooler\u003c\/a\u003e, supports the Hailo AI acceleration module, and can be stacked with the \u003ca title=\"SupTronics X-FAN40 PWM Fan HAT\" href=\"\/products\/suptronics-x-fan40-pwm-fan-hat\"\u003eSupTronics X-FAN40 PWM-controlled fan HAT\u003c\/a\u003e for cooling NVMe devices from above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, SSD and power supply not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for power-hungry M.2 devices:\u003c\/strong\u003e The perfect solution for high-demand devices like AI accelerator cards and large-capacity SSDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible power input options:\u003c\/strong\u003e Can be powered either via the USB-C socket (PD 27W–120W) or the 5. 5x2.1mm DC barrel jack (9–20V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-current power delivery:\u003c\/strong\u003e Integrated dual DC-DC converters supply 5.1V\/8A for the Raspberry Pi 5 and 3.3V\/8A for M.2 devices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide M.2 SSD compatibility:\u003c\/strong\u003e Supports common SSD lengths, including 2230, 2242, 2260, and 2280\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-speed data interface:\u003c\/strong\u003e PCIe 2.0\/3.0 interface enables data transfer speeds up to 8 Gbps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimised thermal design:\u003c\/strong\u003e Compatible with the Raspberry Pi 5 Active Cooler and includes a PCB heat-dissipation slot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStackable top-mount form:\u003c\/strong\u003e Mounts on top of the Raspberry Pi 5, allowing seamless stacking with other HATs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSupports the Hailo AI acceleration module\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible accessories:\u003c\/strong\u003e X-FAN40 PWM-controlled fan HAT providing active cooling for your M.2 devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 24.7292%;\"\u003e\u003cstrong\u003ePower input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 74.9097%;\"\u003e27W-120W USB-C PD power supply (65W\/100W PD power supply recommended)\u003cbr\u003e9-20VDC via DC jack (\u003ca href=\"\/products\/meanwell-12v-5a-60w-power-supply-gst60a12-p1j\" title=\"Mean Well 12V 5A 60W Power Supply\"\u003e12V 5A power adapter\u003c\/a\u003e recommended)\u003cbr\u003e\u003cstrong\u003e(Warning: Only one power source should be connected at a time.)\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 24.7292%;\"\u003e\u003cstrong\u003eRPi 5 Power Supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 74.9097%;\"\u003e5.1V ±5% Max 8A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 24.7292%;\"\u003e\u003cstrong\u003eM.2 Power Supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 74.9097%;\"\u003e3.3V ±5% Max 8A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 24.7292%;\"\u003e\u003cstrong\u003ePorts \u0026amp; Connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 74.9097%;\"\u003e1x DC power jack (5.5x2.1mm)\u003cbr\u003eUSB-C power in connector\u003cbr\u003e1x PCIe connector - 16-pin pitch 0.5mm\u003cbr\u003e1x SSD connector - M.2 KEY-M\u003cbr\u003e1x 40-pin extended GPIO header\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 24.7292%;\"\u003e\u003cstrong\u003ePCIe cable length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 74.9097%;\"\u003e30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 24.7292%;\"\u003e\u003cstrong\u003ePCB Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 74.9097%;\"\u003e85mm x 57mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eSafety Instructions \u0026amp; Warnings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower the X1001-Max via the USB-C socket or the DC jack. \u003cstrong\u003eDo not connect both.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eDo not apply power to your Raspberry Pi via the USB-C port.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with M.2 NVMe devices\u003c\/li\u003e\n\u003cli\u003eNot compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices\u003c\/li\u003e\n\u003cli\u003eOlder NVMe drives with less efficient flash media may not perform as well as newer drives\u003c\/li\u003e\n\u003cli\u003eNew NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Software setup\/tutorials\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1001-max-v1.0_software.html\" target=\"_blank\"\u003eSoftware setup\/tutorials\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Hardware information and assembly\" rel=\"noopener\" href=\"https:\/\/suptronics.com\/Raspberrypi\/Storage\/x1001-max-v1.0_hardware.html\" target=\"_blank\"\u003eHardware information and assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x X1001-Max V1.0 PCIe expansion board\u003c\/li\u003e\n\u003cli\u003e4x M2.5x20mm Spacer\u003c\/li\u003e\n\u003cli\u003e8x M2.5x5mm Screw\u003c\/li\u003e\n\u003cli\u003e2x PCIe FFC cable 30mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, SSD and power supply not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"SupTronics","offers":[{"title":"Default Title","offer_id":55632825188737,"sku":"X1001-MAX","price":25.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/suptronics-x1001-max-high-power-nvme-add-on-for-raspberry-pi-5-suptronics-x1001-max-1236930354.jpg?v=1778086511"},{"product_id":"uctronics-5v-5a-poe-nvme-hat-for-raspberry-pi-5-with-active-cooler","title":"Uctronics 5V 5A PoE+ NVMe HAT for Raspberry Pi 5 (with Active Cooler)","description":"\u003cp\u003eGive your \u003ca href=\"\/products\/raspberry-pi-5\" title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/a\u003e PoE+ power and M.2 NVMe capability in a single, compact HAT!\u003c\/p\u003e \u003cp\u003eThe \u003ca href=\"\/collections\/uctronics\" title=\"Uctronics\"\u003eUctronics\u003c\/a\u003e \u003cstrong\u003e5V 5A PoE+ NVMe HAT\u003c\/strong\u003e delivers up to \u003cstrong\u003e5V 5A (max) via PoE+\u003c\/strong\u003e (with IEEE 802.3at or above) through a single \u003ca href=\"\/products\/2m-network-cable-for-the-raspberry-pi\" title=\"Ethernet cable\"\u003eEthernet cable\u003c\/a\u003e, while the \u003cstrong\u003eM.2 NVMe slot\u003c\/strong\u003e (2230\/2242) offers up to 800MB\/s read\/write speeds for an installed \u003ca href=\"\/products\/raspberry-pi-ssd\" title=\"NVMe SSD\"\u003eNVMe SSD\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003eDesigned for Raspberry Pi 5, it connects via the PCIe 16-pin interface, supports Gen2\/Gen3 modes, features an \u003cstrong\u003eincluded active cooler\u003c\/strong\u003e, and LED indicators for power\/activity.\u003c\/p\u003e \u003cp\u003eThe HAT comes with the included active cooler, standoffs and fixings, riser headers and thermal pads. PoE+ network power sourcing equipment is required to provide the PoE+ input.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included.\u003c\/strong\u003e\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eHigh output power:\u003c\/strong\u003e fully isolated switch-mode power supply (SMPS), delivering up to 25W, 5V\/5A (MAX) output \u003cul\u003e \u003cli\u003eNote: To achieve 5A output, use an IEEE 802.3at or higher PoE input device\u003c\/li\u003e \u003cli\u003e\u003cstrong\u003eDo NOT connect a power supply to USB-C on the Pi 5 board when you are using PoE+ HAT as a power supply\u003c\/strong\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePower over Ethernet (PoE+) support\u003c\/strong\u003e: supports IEEE 802.3af\/at standards, delivering both power and data through a single Ethernet cable\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHigh-Speed NVMe slot\u003c\/strong\u003e: supports M.2 NVMe SSDs (2230\/2242 sizes, M-Key \/ B+M Key)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eEfficient heat dissipation\u003c\/strong\u003e: comes with an active cooler that combines an aluminium heatsink with a PWM fan\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCompact layout\u003c\/strong\u003e: Suitable for most cases, also compatible with Uctronics rack mounts (U6123, \u003ca href=\"\/products\/front-removable-1u-19-rack-mount-for-raspberry-pi\" title=\"U6195\"\u003eU6195\u003c\/a\u003e, \u003ca href=\"\/products\/uctronics-19-1u-raspberry-pi-rack-mount-with-ssd-mounting-brackets-holds-5x-rpi\" title=\"U6264\"\u003eU6264\u003c\/a\u003e)\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eSpecifications\u003c\/h2\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"width: 160.185px;\"\u003e\u003cstrong\u003ePower Input\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"width: 241.094px;\"\u003e37V–57V DC (PoE+)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"width: 160.185px;\"\u003e\u003cstrong\u003ePower Output\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"width: 241.094px;\"\u003e5V 5A (Max)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"width: 160.185px;\"\u003e\u003cstrong\u003eNetwork Standard\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"width: 241.094px;\"\u003eIEEE 802.3af\/at (PoE+)\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"width: 160.185px;\"\u003e\u003cstrong\u003eReading\/Writing Speed\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"width: 241.094px;\"\u003eUp to 800 MB\/s\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"width: 160.185px;\"\u003e\u003cstrong\u003eM.2 Slot Type\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"width: 241.094px;\"\u003eNVMe, M-Key \/ B+M Key\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"width: 160.185px;\"\u003e\u003cstrong\u003eSupported SSD Sizes\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"width: 241.094px;\"\u003e2230 \/ 2242\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"width: 160.185px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"width: 241.094px;\"\u003e66x56.5mm\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/blog.arducam.com\/wp-content\/uploads\/2025\/11\/U6287-Manual.pdf\" title=\"Product manual\" target=\"_blank\" rel=\"noopener\"\u003eProduct manual\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/blog.arducam.com\/wp-content\/uploads\/2025\/11\/UU6287-Assembly-Guide.pdf\" target=\"_blank\" rel=\"noopener\" title=\"Assembly Guide\"\u003eAssembly Guide\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x PoE+ M.2 NVMe HAT\u003c\/li\u003e \u003cli\u003e1x 30mm PCIe cable\u003c\/li\u003e \u003cli\u003e1x Active cooler (with thermal pads)\u003c\/li\u003e \u003cli\u003e1x SSD mounting screw\u003c\/li\u003e \u003cli\u003e1x 2x2-pin header\u003c\/li\u003e \u003cli\u003e1x 4x2-pin header\u003c\/li\u003e \u003cli\u003e1x Screws pack\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Uctronics","offers":[{"title":"Default Title","offer_id":55633292427649,"sku":"U6287","price":28.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/uctronics-5v-5a-poe-nvme-hat-for-raspberry-pi-5-with-active-cooler-uctronics-u6287-1236945328.jpg?v=1778091709"}],"url":"https:\/\/thepihut.com\/collections\/raspberry-pi-ssd-hats\/compatible-with_raspberry-pi-5.oembed?page=2","provider":"The Pi Hut","version":"1.0","type":"link"}