MKR FOX 1200 is a powerful board that combines the functionality of the Zero and SigFox connectivity. It is the ideal solution for makers wanting to design IoT projects with minimal previous experience in networking having a low power device.
The Arduino MKR FOX 1200 board provides a practical and cost-effective solution to adding Sigfox connectivity to projects requiring low power. This open-source board can be connected to Arduino Create for programming, and to the existing Sigfox infrastructure with its broad Europe-wide coverage for collecting data. Sigfox infrastructure runs 24/7 without you needing to do anything to maintain it, and you can always check its status here.
You’ll get one-year free subscription to Sigfox network with the board (for up to 140 messages per day), as well as free access to Spot’it geolocation service that allows you to track the board without GPS or any extra hardware.
The MKR FOX 1200, gives you a great out-of-the-box experience when building IoT projects of any size: from the single sensor monitoring temperature in your home, to an industrial deployment covering the whole of an outdoors factory. The board's main processor is a low power Arm® Cortex®-M0 32-bit SAMD21, like in the other boards within the Arduino MKR family. The Sigfox connectivity is performed with a module from Microchip®, the Smart RF ATA8520, a low power chipset operating in the 868 MHz range. No extra crypto chip is needed in this case, since the Sigfox network offers its own end-to-end security.
These features make it a great IoT node and building block for low power wide area IoT devices within the Sigfox infrastructure.
At Arduino we have made partnered with Sigfox to offer you straightforward way to connect devices to the Cloud with zero investment in infrastructure. Every MKR FOX 1200 comes with a free one-year subscription to Sigfox' data plan, useful for testing the Sigfox network. Please check the plan’s conditions in terms of messages per day at the Sigfox website.
When it comes to coverage, Sigfox covers a large percentage of the European soil. Check this page at Sigfox website to see whether your planned area of application is covered.
The Getting Started section contains all the information you need to configure your board, use the Arduino Software (IDE), and start tinkering with coding and electronics. If you want to know more about Arduino’s Sigfox API, check this reference page.
Sigfox Starter Program
To ensure a better experience for you, our MKR FOX 1200 user eager to start a new project, Sigfox offers a special program called the Sigfox Starter Program. Among others it will give you:
- Access to Sigfox technical platforms (backend, build, etc.)
- Access to Sigfox APIs to start playing with real Sigfox data.
- Access to specialized Sigfox technical content support, the so-called learning center.
Once you have got your board, apply to the program here.
|Microcontroller||SAMD21 Cortex®-M0+ 32bit low power ARM MCU (datasheet)|
|Radio module||Microchip® Smart RF ATA8520 (datasheet)|
|Board Power Supply (USB/VIN)||5V|
|Supported Batteries||2x AA or AAA|
|Circuit Operating Voltage||3.3V|
|Digital I/O Pins||8|
|PWM Pins||13 (0 .. 8, 10, 12, 18 / A3, 19 / A4)|
|Analog Input Pins||7 (ADC 8/10/12 bit)|
|Analog Output Pins||1 (DAC 10 bit)|
|External Interrupts||8 (0, 1, 4, 5, 6, 7, 8, 16 / A1, 17 / A2)|
|DC Current per I/O Pin||7 mA|
|CPU Flash Memory||256 KB (internal)|
|Clock Speed||32.768 kHz (RTC), 48 MHz|
|Full-Speed USB Device and embedded Host|
|Antenna gain||2dB (bundled antenna at the Arduino Store)|
|Carrier frequency||868 MHz|
Payment & Accreditations
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.